Dent Fix Equipment DF-3DX Digital Tram Gauge

SKU:
DF-3DX
UPC:
811662031062

Usually Ships out within 3 to 5 business days

Total Price:
$1,299.00 $1,143.12
(You save $155.88)
Shipping Calculated at Checkout
Shipping Calculated at Checkout

Usually Ships out within 3 to 5 business days

Dent Fix Equipment DF-3DX Digital Tram Gauge

Taking point-to-point measurements from 1'4" to 11'11" (400-3640 mm) the DF-3DX Digital Tram Gauge user can measure in feet, inches, 1/16ths of an inch and metric measurements with the touch of a button. The zeroing function enables you to take comparison measurements, displaying the appropriate positive or negative reading. Placing the center pointer on the prescribed 400 mm mark, measurements shorter than the collapsed length of the digital tram gauge can be made.

Offering our widest measuring range, the DIGI-TRAM gauge comes with x3 350 mm long pointers, x2 110 mm short pointers, x2 bullet pointers, x2 pointer holders, and x2 cones for zeroing out larger holes all stored in a plastic carrying case.

Made in Taiwan.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

 

 

WARRANTY POLICY

Used Product Warranty Claims: A product is considered used when it has been used for more than 1 week and is no longer re-sellable. All used product warranty claims are to be returned to Dent Fix freight pre-paid. All used product will be repaired or replaced and returned to you via regular freight pre-paid. Expedited return shipments are sent freight collect.  Whether to repair or replace is at our sole discretion.
 Air Tools: All our air tools carry a 1-year warranty against manufacturing defects. Customer abuse, such as a lack of proper maintenance, and the damage caused therein is not covered under warranty.​
Consumable: Any item that by its nature or design that wears, gets used up or is permanently changed by its usage is considered a consumable item. Drill bits are a consumable item and as such carry no warranties expressed or implied. There are several procedures the user can implement in order to extend drill bit life, but ultimately the drill bit will break or dull. It is up to the technician to ensure proper usage.
Items with Specific Warranties:
DF-1 Stud Welder:  Lifetime – Chuck of slide hammer & Transformer. 5 year – Trigger switch.
DF-505 “The Maxi”: 5 years on internal components.
DF-601 Surge Protector: Lifetime – return for replacement if red L.E.D. does not light.
DF-900W Aluspot Stud Welder: 5 Years - Internal components.
DF-SPR67 Self-Piercing Riveter: 1 Year - Internal components.
DF-EZN1 & DF-EZN1G EZ Nitrogen Welders - 5 Years - Internal components.
 To extend this warranty, free of charge to One Year (365 days), simply fill out a Dent Fix Product Warranty Card (available upon request - info@dentfix.com) and return it to us within 90 days from the date of purchase. Other warranties may apply, please check your product sheet for more information. This warranty does not apply where: repairs have been made or attempted without the assistance of or by an authorized Dent Fix Repair Center; repairs are required because of normal wear and tear; the tool has been abused or misused or improperly maintained; alterations have been made to the tool.
 In no event shall DENT FIX be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies to both during and after the term of the warranty. 
DENT FIX disclaims liability for any implied warranties, including implied warranties of “merchantability” and “fitness for a specific purpose”, after the term of this warranty.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitations of incidental or consequential  damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Frequently Bought Together

Please choose options for all selected products