Challenger Lifts EV1020-QC Quick Cycle 10,000 Lbs Inground Car Lifts
- Brand:
- Challenger Lifts
- SKU:
- EV1020-QC
- Condition:
- New
Factory Shipped
Factory Shipped
Challenger Lifts EV1020-QC Quick Cycle 10,000 Lbs Capacity Inground Car Lifts
Inground car lifts with superior arm sweep, the widest drive-thru in the industry plus more service bays (smaller footprint than surface car lifts) means even more revenue. EV1020 EnviroLift™ cassette-style inground lifts meet all the demands of a professional service facility.
With over 50% more bearing contact surface than competitor’s lifts, enhanced wipers both top and bottom and NEW larger 8-1/2” chrome pistons, your shop will have a superior, more stable and repeatable car lift resulting in increased productivity.
EV1020 services more vehicles with its double telescoping screw pads, 3-stage arms and wide drive-thru. These car lifts protect your investment and the environment with its fully contained polymer housing made from recycled plastic (No EPA concerns). It also creates a professional showroom style appearance with its open, aesthetically pleasing look.
How do we achieve accelerated lifting?
We have increased the motor and pump size which provides a faster rise and descent. These components increase the rise of speed from 48 seconds to 27 seconds equating to a 42% time savings. Lowering speed is held to a constant 17 seconds (approximately) regardless of the weight of the vehicle.
Features and Benefits
This inground car lift will both optimize space and increase productivity in your repair shop. The EV1020 lift includes enhanced top and bottom wipers, double telescoping screw pads, and 3-stage arms. For an inground car lift that provides 50% more bearing contact surface than competitors, turn to the EV1020 lift.
- Offset 3-stage front and rear arms safely lift both symmetrically and asymmetrically within the same service bay maximizes service capabilities and revenue potential.
- Stainless steel air lock release cylinder prevents car lift from rust associated with condensation
- 87" drive-thru 87" drive-thru provides more tire clearance than competitor's car lifts for wide wheelbase vehicles allowing easy drive-on application.
- Fully contained and sealed polymer cassette tube minimizes risk of hydraulic fluid seeping into the ground as associated with low pressure inground car lifts.
- Double Telescoping Screw Pads minimizes the need for truck adapters by meeting a wider range of vehicle manufacturer designated pick up points.
- NEW Chrome non-breathing ram style cylinder minimizes water intake and other contamination
- 50% more bearing contact than competitors' car lifts provides increased stability.
- NEW Larger 8-1/2" diameter chrome pistons provides car lift with greater stability under load
- Mechanical lock Mechanical lock engages every 3" allowing technician to work at an ergonomic height to increase productivity and minimize fatigue.
- NEW Enhanced raised wiper at top and bottom of bearing provides better grease retention and minimizes contamination from entering into bearings
Specifications
The EV1020 inground car lift is the ultimate lift for upping productivity and meeting the demands of a service facility. It features new 8-1/2” chrome pistons, the widest drive-thru in the industry, and enhanced top and bottom wipers. To find out more about this inground car lift, read the specifications below and determine if this ecofriendly lift is right for your repair shop.
Model Number | EV1020 |
---|---|
Car Lift Capacity | 10,000 lbs. (4536kg) |
Stroke | 68" (1727mm) |
A Rise Height1 | 74" (1880mm) |
B Width Overall | 110" (2794mm) |
C Drive-Thru Clearance | 87" (2210mm) |
D Reach (Arm Minimum) | 19-5/8" (498mm) |
E Reach (Arm Maximum) | 42-1/8" (1070mm) |
F Rubber Pad Adapter (Minimum)2 | 3-7/8" (89mm) |
G Rubber Pad Adapter (Maximum)2 | 3-7/8" - 6"(98mm - 152mm) |
Capacity (Per Arm) | 2500 lbs. (1134kg) |
Guide Plunger Diameter | 8 1/2" (216mm) |
Motor | 2HP |
Voltage (Single Phase Std.)3 | 208v-230v |
Speed of Rise | 27 seconds |
Air Required | 75-125 psi |
Ceiling Height Required for EV1020 car lifts | 79" (2007mm) plus height of tallest vehicle |
Shipping Weight | 2950 lbs (1338 kg) |
- Car Lift Rise Height is measured with superstructure in highest position.
- Specifications are listed without rubber pad, for measurements with rubber pad add 1-4" (6mm).
- Optional 3 phase electrical also available. Specify at time of order.
Accessories:
Challenger Lifts Warranty Agreement
Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.
This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.
This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.
The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.
Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.
Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.
Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml
Description | Model/Series | Labor | Functional Parts | Structural parts | Extended Warranty Available |
CL10 | CL10 | 1 Year | 2 Years | 5 Years | Yes |
10K 2-Post, 9K 2-Post | LE10, SA10, CLFP9 | 1 Year | 1 Year | 5 Years | No |
12K, 15K, 18K 2-Post | CL12, 15000, 18000 | 1 Year | 2 Years | 5 Years | Yes |
8K Inground | EVW0820 | 1 Year | 2 Years | 2 years | No |
10K Ingrounds | EV1020 | 1 Year | 2 Years | 5 Years | Yes |
12K, 15K Ingrounds | EV1220, EV1520 | 1 Year | 1 Year | 5 Years | Yes |
14K 4-Post | 4P14 | 1 Year | 1 Year | 5 Years | No |
15K 4-Post | 4015 | 1 Year | 2 Years | 5 Years | No |
30K 4-Post Cable Drive | 4030 | 1 Year | 2 Years | 5 Years | No |
30K, 40K, 60K Chain Drive | 44030, 44040, 44060 | 1 Year | 1 Year | 1 Year | No |
Rolling Jacks | RJ, SAJ | 1 Year | 1 Year | 1 Year | No |
Mid and Short Rise | MR-6, SRM-10 | 1 Year | 1 Year | 1 Year | No |
Scissors | SX14, DX77 | 1 Year | 1 Year | 1 Year | No |
Mobiles | CLHM | 1 Year | 1 Year | 5 Years | No |
Accessories | 90 days | No | |||
Replacement Parts | 90 days | No |
Extended Warranty
An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.