Challenger Lifts CL10-XP9-QC-3 9,000 Lbs Drive On Style Two Post Lifts W/ Quick Cycle And 3' Extensions

SKU:
CL10-XP9-3-QC
Condition:
New
Capacity:
9,000 Lbs

Factory Shipped

Total Price:
$11,818.90 $8,151.00
(You save $3,667.90)
Free Shipping
Free Shipping

Factory Shipped

Challenger CL10-XP9-QC-3  10,000lb. Two Post Lift

CL10-XP9-QC-3  Two Post Pad Lift

The automotive industry is changing and vehicles are lasting longer without the need for major repairs. Service industries also have to make dramatic changes to remain as profitable as they once were. Express Service is becoming more and more prevalent in the service industry. 

Our innovative solution for Express Service is our CL10-XP9-2-QC, which is a compact, low-profile, 9,000 lb. capacity drive-on style two post lift featuring flip-up ramps mounted on our CL10series two post lift. Our quick vehicle spotting solution is perfect for express service requirements such as quick lube applications, tire rotations, tire balancing, brake work, inspection check lanes and any other general service need where productivity is essential. 

CL10-XP9-QC-3  two post pad lifts come standard with (4) 1-1/2” and (4) 3” rubber spotting blocks and (4) two position adapter blocks. 

2-post lift w/ drive-on style pad featuring flip-up ramps, Conventional Power Controls, single-point mechanical lock release w/ 3' column extensions (14' 8" ht.) with Quick Cycle™ increasing rise (27 sec) and descent speed (approx. 17 sec).

Features:

  • Drive-on style pad provides quick vehicle spotting for express bays.
  • Low profile pad design allows extra clearance for low profile vehicles.
  • Optional Tire Hanger Kit allows tires to be stowed at an ergonomic height without the need for bending over during tire rotations.
  • Reinforced front and rear access ramps are designed to easily flip-up and lock to extend the platform load length which will accommodate longer wheelbase vehicles.
  • Standard column mounted spotting block storage caddy helps keep a safe and clean work environment.
  • Non-skip surface provides extra traction when driving over pad.
  • 48" elongated carriage design decreases load on bearing.
  • Oversized 5" diamter pulley and 5/16" cable reduces stress on equalization system and increases cable lift.
  • Single point mechanical lock release system with jacket coated protection and no lock cable pulleys, and double clutch release bar protects cable from stretching while disengaging both column locks simultaneously.
  • Rubber door guards provide added security against vehicle door damage.
  • 11' 8" standard height with 2' and 3' extensions available allows lift to be placed in standard bay with 12' ceilings.
  • Fully gusseted base plate design reduces column deflection.

Specifications: 

Model
CL10-XP9-QC-3   

Lift Capacity*

9,000 lbs. (4082kg)
A Rise Height
70" (1778mm)
B Column Height
11' 8"
(3556mm)
 
 
C Cylinder Overall (Full Stroke)
11' 11" (3632mm)
D Width Overall
11' 6-1/2" (3518mm)
E Drive-Thru Clearance
79-1/2" (2019mm)
F Floor to Overhead Switch
134-1/2" (3416mm)
 
 
G Platform Height
2-1/4" (57mm)
H Platform Width
24" (610mm)
I Platform Length*
56" (1422mm) / 68" (1727mm) / 80" (2032mm)
J Width Between Platforms
31-1/2" (800mm)
K Inside of Columns
110" (2794mm)
Motor
2HP
Voltage
208v - 230v (Single Phase Standard)4
Speed of Rise
48 seconds
Ceiling Height Required
12' (3658mm)
 
 

cl10series-techdrawing.jpg

Platform superstructure specifications are based on CL10 lift installed at 110” width. 
* Three different platform lengths represent having (0) ramps, (1) ramp, or (2) ramps flipped up to extend platform.

 Accessories:

Challenger Lifts offers a number of different two post car lift accessories for your CL10-XP9 lift. Whether you’re looking for stack air electric work stations, height extensions, or any other accessory.

Two post auto lift air/electric workstation   Two post auto lift 2 foot extension   Two post auto lift 2 foot extension   Two post auto lift tire hanger kit

          B10264                           A2006-2                           A2006-3                 THK-CLXP9-STD 

 Two post auto lift tire tool manager

             B99700

Challenger Lifts Warranty Agreement

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.

Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.

Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml

Description Model/Series Labor Functional Parts Structural parts Extended Warranty Available
CL10 CL10 1 Year 2 Years 5 Years Yes
10K 2-Post, 9K 2-Post LE10,  SA10,  CLFP9 1 Year 1 Year 5 Years No
12K, 15K, 18K 2-Post CL12, 15000, 18000 1 Year 2 Years 5 Years Yes
8K Inground EVW0820 1 Year 2 Years 2 years No
10K Ingrounds EV1020 1 Year 2 Years 5 Years Yes
12K, 15K Ingrounds EV1220, EV1520 1 Year 1 Year 5 Years Yes
14K 4-Post 4P14 1 Year 1 Year 5 Years No
15K 4-Post 4015 1 Year 2 Years 5 Years No
30K 4-Post Cable Drive 4030 1 Year 2 Years 5 Years No
30K, 40K, 60K Chain Drive 44030, 44040, 44060 1 Year 1 Year 1 Year No
Rolling Jacks RJ, SAJ 1 Year 1 Year 1 Year No
Mid and Short Rise MR-6, SRM-10 1 Year 1 Year 1 Year No
Scissors SX14, DX77 1 Year 1 Year 1 Year No
Mobiles CLHM 1 Year 1 Year 5 Years No
Accessories     90 days   No
Replacement Parts     90 days   No


Extended Warranty

An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.

Frequently Bought Together

Please choose options for all selected products

  • Choose Options