Quickjack QJ-5150006 Motorcycle/ATV Lift Platform w/ Front Wheel Vise
This adapter kit by QuickJack offers the only way to get your ATV or motorcycle in the air without purchasing a significantly more expensive, dedicated ATV/motorcycle lift. Simply push two QuickJack frames together and attach our exclusive support axle. The lift platform then secures to your QuickJack frames in a flash. The rugged diamond tread platform is comprised of cold-formed and tig-welded 6061-T6 aluminum. It provides maximum grip and durability for all tire types.
Make QuickJack Compatible with ATVs and motorcycles up to 1,000 lbs.
The QuickJack ATV adapter kit features a cold-formed and tig-welded 6061-T6 aluminum diamond tread platform. It offers a slick design that ensures maximum grip for your tires. This kit is also an ideal tool to assist in the washing and detailing of ATVs and motorcycles. It is similar to our motorcycle adapter kit, except it is widened to also accommodate ATVs.
The platform is also safe to hose down when it's time to clean off all the dirt and mud its bound to collect. The entire adapter kit assembles from storage in just minutes and lifts in seconds flat. A fully adjustable front-wheel clamp keeps hold of the tire by constricting two thick, non-abrasive, chemical-resistant, treaded rubber pads that will never damage your bike or corrode due to weather, moisture, chemicals or heavy use.
To further increase the adapter kit's versatility, be sure to grab the Ranger RML-1100, a 1,100-lb. capacity jack. This one great tool turns your QuickJack into a full-service, all-in-one vehicle lift. It acts as a "rolling bridge jack" for the platform, safely engaging the frame of your vehicle to let you service flats, perform tire swaps and conduct suspension work with ease.
QuickJack ensures that setting up this portable adapter kit is hassle-free: no bolts, anchors or other hard-to-install pieces. Simple, custom-fit, hardened-steel axles lock securely over the QuickJack frames and provide support for the lift platform, which perfectly walks the line between heavy-duty durability and lightweight portability. It only takes about two quick minutes to get your QuickJack adapter from "stow to go," and it’s just as easy to glide your ATV or motorcycle over the low-profile ramp.
Features
- Cold-formed and tig-welded aluminum diamond tread plate
- Rugged steel support axle
- Red, power-coat finish clamp with durable, treaded rubber padding
- Ergonomic crank for easy, non-damaging wheel security
- Heavy-duty tie-down rings
- Recommended RML-1100 ATV Jack (*sold separately)
Specifications
|
What's inside?
- 1x Aluminum ATV/motorcycle platform.
- 1x Motorcycle wheel vise/clamp.
- 1x Steel support rod w/ hardware.
- 2x Tie-down rings.
Downloads
Standard Warranty
Duration: From the date of purchase by the original Purchaser or 12 months from the date of shipment or whichever comes first.
- One-Year (12-Month) Warranty on equipment structure*
- One-Year (12-Month) Warranty on operating components
- One-Year (12-Month) Free Shipping** on ground-freight charges related to warranty performance
Optional Extended Warranty
Duration: From the date of purchase by the original Purchaser or 24 months from the date of shipment or whichever comes first.
- Two-Year (24-month) Warranty on equipment structure*
- Two-Year (24-Month) Warranty on operating components
- Two-Year (24-Month) Free Shipping** on ground-freight charges related to warranty performance
Limited Warranty
- Who gives this warranty (Warrantor): QuickJack, 1645 Lemonwood Dr., Santa Paula, CA 93060
- Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
- What products are covered by this warranty: QuickJack portable lift system
- What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
- What is not covered under this warranty:
- Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
- Any damage caused by using equipment beyond rated capacity and/or capability
- Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
- Items considered general wear parts such as rubber or plastic pads/protectors, worn casters/wheels, plastic trays, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
- Any component damaged in shipment or any failure caused by installing or operating equipment under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
- Any component failure caused by rain, excessive humidity, corrosive environments or other contaminants
- Rusted components due to improper maintenance or corrosive environments
- Cosmetic defects that do not interfere with product functionality
- Damage due to incorrect voltage or improper wiring
- Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of a QuickJack product
- All electrical components are guaranteed for one year (12 months) against defects in workmanship and/or materials when the lift is installed and used according to specifications
- Responsibilities of Warrantor under this warranty: Repair or replace with either new or reconditioned unit at Warrantor’s option, component and/or unit which is defective, has malfunctioned and/or failed to conform within duration of the warranty period.
- Responsibilities of Purchaser under this warranty:
- Provide dated proof of purchase and maintenance records
- In some cases, components may be required to be shipped to the nearest QuickJack Authorized Service Center. Freight costs, after 12 months, must be borne by the Purchaser.
- Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
- When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*Equipment structure is defined as any non-moving permanently affixed frame or main body, or sub-structures that are non-moving and permanently affixed or attached to any main equipment structure or frame. **Free-shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote addresses.
Limitation of Liability
QuickJack shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other than an authorized representative of QuickJack has made any attempt to service or modify the tool prior to its return to QuickJack under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages QuickJack products are provided and sold as is without any express or implied warranties including warranties of merchantability or fitness for particular purpose. No warranties, expressed or implied, will apply after this period. QuickJack may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on www.quickjack.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.