Dannmar D2-10A 10,000 Lbs Asymmetric Clear-floor 2-Post Lift
- Brand:
- Dannmar
- SKU:
- DA-5175313
Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Dannmar D2-10A 10,000 Lbs Asymmetric Clear-floor 2-Post Lift (DA-5175313)
10K Capacity 2-Post / Asymmetric Clearfloor / Incl. Stack Pads & Adapters
The D2-10A is an asymmetric clearfloor two-post lift that features a 10,000 lb. lifting capacity and accommodates full-size trucks, vans, and standard passenger cars. Single-piece column construction, tubular steel lifting carriage, and direct-drive hydraulic cylinders ensure the best possible performance and reliability. Rotated asymmetric columns allow vehicles to be loaded with doors clear of the columns for convenient entry and exit of vehicles.
Rugged Durability, High Performance, Extreme Versatility, Demanding Applications
The D2-10A is designed to tackle the toughest jobs in your garage or workshop and outperform and outlast almost every lift in its class. With a powerful 10,000 lb. lifting capacity, the D2-10A has been designed to accommodate full-size trucks and vans, standard passenger cars, and sport and performance vehicles.
Equipped with a self-contained electric-hydraulic power unit and twin direct-drive hydraulic cylinders, the D2-10A is extremely reliable and durable. Nested inside the unyielding welded-steel columns are solidly-built carriage assemblies that glide on maintenance-free UHMW bearings. Soft-cushioning column guides provide silent staging and shudder-free movement of the lifting carriage during both lifting and lowering.
Asymmetric columns and extended-length rear arms allow vehicles to be loaded with doors rear and clear of the columns for convenient entry and exit of the vehicle. This reduces the chance of door dings due to column interference. Easy-swing telescoping arms feature automatic arm restraints ensuring that vehicles stay put when being serviced, and tear-resistant urethane contact pads are augmented by an 8-piece set of stackable adapters of varying heights. An attractive and extremely durable powder coat finish combined with zinc-plated components means your lift will last and still look good many years to come.
Features
- Drop-in pads offer increased versatility
- Added overhead safety shutoff bar
- Tru-Metric™ arm design for versatile arm positions
- 30° rotated single-piece columns
- Single-point safety release
- Drop-end arms provide a lower pad height
- Dual hydraulic direct-drive cylinders
- Oversized 53" tall carriage for superior strength
- Electric/hydraulic power system
- Automatic arm restraints
- Heavy-duty 1/2” aircraft-quality equalizer cables
- Oversized cable sheave reduces cable fatigue
- 4-piece 63 mm stackable adapter set included
- Triple-telescoping arm design
- Versatile drop-in contact pads with stackable adapter pins
- ALI Certified
Specifications
Style | Asymmetric |
SKU# | 5175313 |
Lifting Capacity | 10,000 lbs. (4,536 kg) |
A - Lowered Height + Pad | 5" (127 mm) |
B - Max. Lift Height (Top Lock) | 78.5" (1,994 mm) |
C - Max. Rise | 69" (1,753 mm) |
D - Height Overall | 145" (3,683 mm) |
E - Width Overall | 143.5" (3,645 mm) |
F - Width Outside Columns | 137.25" (3,486 mm) |
G - Width Inside Columns | 120.75" (3,067 mm) |
H - Drive-Thru Clearance | 100" (2,540 mm) |
I - Floor to Top Switch | 141" (3,581 mm) |
J - Front Arm Reach | 29.25" (743 mm) - 43.75” (1,111 mm) |
K - Rear Arm Reach | 40.25" (1,022 mm) - 58” (1,473 mm) |
Max. Load per Arm | 2,500 lbs. (1,134 kg) |
Time to Full Rise | 45 seconds |
Noise | 45 dB |
Motor | 220 VAC / 60 Hz / 1 Ph |
Shipping Weight | 1,682 lbs. (763 kgs) |
Shipping Dimensions | 151" x 23" x 35" (4,495 mm x 597 mm x 889 mm) |

WARRANTY INFORMATION
Duration: From the date of purchase by original Purchaser or 36-months months from the date of shipment by Dannmar or whichever comes first. Three Years (36-Months) Warranty on the lift structure [*] [**]
- One Year (12-Months) Warranty on the hydraulic cylinder(s) and power unit [*] [**]
- One Year (12-Months) Warranty on operating components [*] [**]
- One Year (12-Months) Warranty on electrical components (excluding power unit) [*] [**]
Limited Warranty
1. Who gives this warranty (Warrantor): Dannmar, 1645 Lemonwood Dr., Santa Paula, CA 93060
2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
3. What products are covered by this warranty (Product): Any Dannmar Two-Post or Four-Post Vehicle Service Lift**
4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
5. What is not covered under this warranty:
a. Freight and shipping charges related to warranty performance.
b. Onsite labor or factory labor associated with warranty performance.
c. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service Product in accordance with instructions provided in the owner’s manual(s) supplied.
d. Any damage caused by overloading Product beyond rated capacity.
e. Items or service normally required to maintain the Product, i.e. lubricants, oil, etc.
f. Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship.
g. Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings.
h. Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants.
i. Rusted components due to improper maintenance or corrosive environments.
j. Cosmetic defects that do not interfere with Product functionality.
k. Damage due to incorrect voltage or improper wiring.
l. Any failure that results from improper installation or use not according to specifications.
m. Damage caused by disasters such as fire, flood, wind, and lightning.
n. Damage caused by unauthorized attachments or modifications.
6. Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor's option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. Warrantor will pay reasonable labor costs for the first 12 months only.
7. Responsibilities of Purchaser under this warranty/ notice of claims:
a. Provide dated proof of purchase and maintenance records.
b. In some cases, components may be required to be shipped to the nearest Dannmar Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
c. Use reasonable care in the operation and maintenance of the Products as described in the owner's manual(s).
d. Immediately upon receipt of the Product, Purchaser shall inspect the same. Any claim for shortage must be made within ten days after Purchaser's receipt. All other claims, including claims for alleged defective Product, must be made within fifteen days after Purchaser learns of the facts upon which such claim is based, but in no event later than the applicable one, two or five year period specified above for the specified component(s). All claims not made in writing and received by Seller within the time periods specified above shall be deemed waived. With respect to any defects incapable of discovery until in use, all claims for any damages or losses as a result of such defects shall be deemed waived unless made in writing and received by Seller within fifteen days after Purchaser learns of the alleged defect giving rise to the claim and after the expiration of said periods, but in no event later than the applicable one, two or five year period specified above for the specified component(s). Purchaser expressly assumes all liability for all such damages or losses, irrespective of any use which shall have taken place or whether the alleged defect shall have occurred or been discovered prior to expiration of such periods.
8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
9. *As determined by Warrantor in its sole discretion**For all Dannmar brand Two-Post or Four-Post Vehicle Service Lifts (excluding specialty lifts, high rise, commercial parking, material handling, or models for particular purpose) manufactured on or following 6/1/2020.