Challenger Lifts CL10V3-2 Versymmetric 10000 Lbs 2 Post Lift W/ 2ft Extensions
*Extra accessories shown in the pictures are sold separately
CL10V3 Series
Challenger’s CL10V3 model features our exclusive Versymmetric technology to allow you to service the widest range of vehicles and maximize your bottom line. 3-stage front and 3-stage rear arms with our industry-first directSPOT design eliminate the need to shuffle a vehicle back and forth to swing the front arm clear of the tire to reach recommended lift points. Accurate first-try spotting will boost your productivity as well as reduce frustration in your shop.
We also offer the CL10V3 in several configurations to meet your service application needs. A drive-on pad option provides the quickest vehicle spotting for express bays. Our added Quick Cycle™ models can rise in just 27 seconds and lower in only 17 seconds. Quick Cycle™ technology’s increased lift speed will drastically boost your service potential. Adjustable height and width options are also available. In addition, choose between a wide range of accessories to make the CL10V3 the perfect choice for your shop. Expand your service potential with our most versatile, easy-to-operate lift.Take your 2 post lift for sale at JMC, and get your car auto spare parts, ask now at JMC for yours, and enjoy it in your garage, workshop or terrace.Features
- 2 feet height extensions
- Dual Pendant Controls
- Quick Cycle
- 10000 pound 2 post car lift
- Versymmetric offset front arms provide directSPOT to vehicle lift points and safely lifts both symmetrically and asymmetrically within the same service bay maximizing service capabilities and revenue potential
- Oversized 5 in. diameter pulley and heavy duty 5/16 in. cable reduces stress on equalization system and increases cable life
- 48 in. elongated carriage design increases lift life
- Standard model fits 12 foot ceiling height. Additional 2 foot or 3 foot extensions available
- Padded overhead shut off system prevents vehicle damage
- Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
- Fully gusseted base plate design increases column rigidity
- Pulley-less jacketed single-point lock release system makes for smoother, easier operation and longer life
- Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage
- Plated arm restraints and arm pins inhibit rust and provide long-lasting durability
- Premium powder coat finish provides long-lasting durability
Specifications
Description | 2’ Extensions |
Lifting Capacity | 10,000 lbs. |
Lift Configuration | Versymmetric®, 3-Stage Front & Rear |
Rise Height |
74 1⁄8 ” |
Height of Columns | 13’ 2” or 13’ 8” |
Max. Extended Cylinder Height | 11’ 11” |
Adjustable Width Overall |
12’ 1⁄2 ” |
Drive Thru Clearance | (-6”) 106” |
Floor to Overhead Switch) |
12’ 8 1⁄2 ” or 13’ 2 1⁄2 ” |
Front Arm Reach | Min. 20” Max. 42” |
Rear Arm Reach | Min. 37 5⁄8 ” Max. 60” |
Screw Pad Height | Min. 3 7⁄8 ” Max. 6 1⁄8 ” |
Inside Columns | (-6”) 116” |
Low Lock Height | 12” Net Rise |
Rise Time | Standard: 38s QuickCycle™: 24s (est.) |
Max. Load per Arm | 2,500 lb. |
ALI Certified | ☑ |
Additional Parts and Accessories Sold Separately
Productivity Accessories | |
Part No. | Description |
B10264A | Air/electric workstation with filter/lubricator/regulator |
B99700 | Tire Tool Manager Work Station with filter/lubricator/regulator |
TR-07 | Turf Rail Quick Change Attachment |
Power Upgrades | |
Part No. | Description |
3PH217 | Power Unit Upgrade to 3-Phase - 208V |
3PH239 | Power Unit Upgrade to 3-Phase - 230V |
3PH469 | Power Unit Upgrade to 3-Phase - 460V |
Footpad Accessories | |
Part No. | Description |
B2280PR | NEW wide frame footpad |
CLXP9 | Low-profile Express Service Pad |
10300 | Pair of luxury car adapters |
10313 | Pair of 6 in. stack adapter extensions |
10315 | Stack adapter kit - includes (4) 3 in. Stack Extensions, (2) 6 in. Stack Extensions & (2) Organizer Racks with hardware |
10316 | Organizer rack for stack adapter extensions |
B2260 | Round rubber-style double screw foot pad assembly. For use on 10k 2-post lifts only, 2,500 lb capacity per footpad. |
Download
CL10V3 Manual
CL10V3 Spec Sheet
CL10V3 Brochure
Other Models
Model Number | CL10V3 | CL10V3-DPC | CL10V3-QC | CL10V3-DPC-QC |
Lifting Capacity | 10,000 lbs. | 10,000 lbs. | 10,000 lbs. | 10,000 lbs. |
Lifting Configuration | Versymmetric (Symmetric & Asymmetric) | Versymmetric (Symmetric & Asymmetric) | Versymmetric (Symmetric & Asymmetric) | Versymmetric (Symmetric & Asymmetric) |
Arms | 3-stage front/3-stage rear | 3-stage front/3-stage rear | 3-stage front/3-stage rear | 3-stage front/3-stage rear |
Rise Height | 74.125” | 74.125” | 74.125” | 74.125” |
Overall Height | 134” / 140” | 134” / 140” | 134” / 140” | 134” / 140” |
Overall Height (Cylinder Extended) | 143” | 143” | 143” | 143” |
2’ Height Extension Available | Yes | Yes | Yes | Yes |
3’ Height Extension Available | Yes | Yes | Yes | Yes |
Overall Width | 138.5” / 143” | 138.5” / 143” | 138.5” / 143” | 138.5” / 143” |
Drive-Thru Clearance | 100” / 104.5” | 100” / 104.5” | 100” / 104.5” | 100” / 104.5” |
Floor to Overhead Switch | 128.5” / 134.5” | 128.5” / 134.5” | 128.5” / 134.5” | 128.5” / 134.5” |
Front Arm Reach | 20” - 42” | 20” - 42” | 20” - 42” | 20” - 42” |
Rear Arm Reach | 37.625” - 60” | 37.625” - 60” | 37.625” - 60” | 37.625” - 60” |
Screw Pad Height | 3.875” - 6.125” | 3.875” - 6.125” | 3.875” - 6.125” | 3.875” - 6.125” |
Inside Columns | 110” / 114.5” | 110” / 114.5” | 110” / 114.5” | 110” / 114.5” |
Motor / Voltage | 2HP, 208v-230v, 60Hz, 1Ph | 2HP, 208v-230v, 60Hz, 1Ph | 3HP, 208v-230v, 60Hz, 1Ph | 3HP, 208v-230v, 60Hz, 1Ph |
Speed of Rise | 38 s | 38 s | 27 s | 27 s |
Ceiling Height Required | 12' | 12' | 12' | 12' |
ALI/ETL Certified | Yes | Yes | Yes | Yes |
Quick Cycle | - | - | Yes | Yes |
Dual Pendant Controls | - | Yes | - | Yes |
Colors Available | Red, Blue, Black | Red, Blue, Black | Red, Blue, Black | Red, Blue, Black |
Challenger Lifts Warranty Agreement
Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.
This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.
This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.
The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.
Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.
Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.
Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml
Description | Model/Series | Labor | Functional Parts | Structural parts | Extended Warranty Available |
CL10 | CL10 | 1 Year | 2 Years | 5 Years | Yes |
10K 2-Post, 9K 2-Post | LE10, SA10, CLFP9 | 1 Year | 1 Year | 5 Years | No |
12K, 15K, 18K 2-Post | CL12, 15000, 18000 | 1 Year | 2 Years | 5 Years | Yes |
8K Inground | EVW0820 | 1 Year | 2 Years | 2 years | No |
10K Ingrounds | EV1020 | 1 Year | 2 Years | 5 Years | Yes |
12K, 15K Ingrounds | EV1220, EV1520 | 1 Year | 1 Year | 5 Years | Yes |
14K 4-Post | 4P14 | 1 Year | 1 Year | 5 Years | No |
15K 4-Post | 4015 | 1 Year | 2 Years | 5 Years | No |
30K 4-Post Cable Drive | 4030 | 1 Year | 2 Years | 5 Years | No |
30K, 40K, 60K Chain Drive | 44030, 44040, 44060 | 1 Year | 1 Year | 1 Year | No |
Rolling Jacks | RJ, SAJ | 1 Year | 1 Year | 1 Year | No |
Mid and Short Rise | MR-6, SRM-10 | 1 Year | 1 Year | 1 Year | No |
Scissors | SX14, DX77 | 1 Year | 1 Year | 1 Year | No |
Mobiles | CLHM | 1 Year | 1 Year | 5 Years | No |
Accessories | 90 days | No | |||
Replacement Parts | 90 days | No |
Extended Warranty
An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.