Bendpak XPR-12CL-LTA Long Reach Arms 2-Post Lift

Finding the lift points on bigger trucks and vehicles with a two-post lift can often be a challenging procedure. When lift arms are too short, they need to be moved closer together to reach the vehicle lift points and this makes it hard to find the vehicle’s center of balance on especially long wheelbases. But the new BendPak XPR-12CL-LTA solves this problem and allows you to reach even the longest, most difficult wheelbases in the industry. The XPR-12CL-LTA features three-stage telescoping lift arms with a 72” maximum range, extending even further than the 58” on our standard XPR12CL two-post lift series. This broader option allows you to find the center of balance on the biggest trucks around, giving you the versatility and power to safely lift any vehicle up to its 12,000-lb. capacity.

The XPR-12CL-LTA is ALI Certified

The Automotive Lift Institute (ALI) is the golden standard of automotive lift safety. With their ANSI accreditation, ALI is the only nationally recognized institute for lift certification. An ALI Certification assures you that the automotive lift in your garage meets with the quality and safety standards developed by ALI over the last 74 years of its operation. A lift that is ALI Certified had to meet with rigorous safety standards to determine the safety of its structural integrity, design, components, manual instruction and production facility.

Lift Carriages Strengthened to Handle Long Reach

Along with its extended reach, the XPR-12CL-LTA features extra carriage strength to counter the extra weight of the extra-long arm. Optional column extension BendPak can increase your overhead clearance to 192” overall height to maximize the number vehicle types you can service in this weight class.

Features

CE Approved and Certified.
Padded overhead safety shutoff bar
Extended height top-beam provides greater clearance
Single-point safety release
Dual direct-drive hydraulic cylinders
Dual-synchro equalization system for equal lifting
Oversized 53” tall carriage for superior strength
Electric / hydraulic power system
Oversized A36 steel base plates
Self-lubricating dura-glide UHMW polyethylene bearings
Safety locks in each column spaced every 3”
Automatic arm restraints
Heavy-duty 1/2” aircraft-quality equalizer cables
Oversized cable sheave diameter reduces cable fatigue
Durable, rubber lift pads with stackable adapters
16-piece specialty adapter set includes four 6” stackable adapters, four 3” stackable adapters, four polyurethane contact pads and four frame cradle pads
Convenient storage is included for truck and van adapters
Triple-telescoping arms provide increased range

Specifications

Lifting Capacity	12,000 lbs. (5,443 kg)
A - Rise	69" (1,753 mm)
B - Rise + Pad Only	74" (1,880 mm)
C - Max. Lifting Height	80" (2,032 mm)
D - Min. Height + Pad	5" (127 mm)
*E - Height Overall ()**	170" (4,318 mm)
F - Width Overall	155" (3,937 mm)
G - Outside Columns	144" (3,658 mm)
H - Inside Columns	120" (3,048 mm)
I - Drive-Thru Clearance	106" (2,692 mm)
*J - Floor to Top Switch ()**	165" (4,191 mm)
K - Front Arm Reach (MIN)	37" (940 mm)
K - Front Arm Reach (MAX)	72" (1,829 mm)
L - Rear Arm Reach (MIN)	37" (940 mm)
L - Rear Arm Reach (MAX)	72" (1,829 mm)
Screw Pad Adjustment	Not Compatible
Max. Load per Arm	3,000 lbs. (1,361 kg)
Time to Full Rise	45 seconds
Noise	45 dB
Motor	220 VAC / 60 Hz / 1 Ph

Bendpak charges sales tax in these states California, Washington, Alabama, Arizona, Colorado, Louisiana, North Carolina, and Ohio.