BendPak 10AP-168 PRO 10K Capacity 2-Post Lift Package 

The 10AP-168 PRO-Series is the lift of choice for those who are serious about their work, whether it’s in a garage or in a shop. With an overall height of 168”, taller techs out there will be able to work more effectively than ever before.

Features

• Durable powder coat finish.
• Expandable top beam accommodates wide or narrow drive-thru configurations.
• Double-telescoping screw pads offer increased versatility.
• Padded overhead safety shutoff bar.
• Exclusive Bi-Metric arm design for more versatile arm positioning.
• Single-point safety release.
• Drop-end arms provide a lower pad height.
• Dual hydraulic direct-drive cylinders.
• Oversized 53" & 59" tall carriages for superior strength and durability.
• Electric / hydraulic HVLP power system.
• Self-lubricating dura-glide UHMW polyethylene bearing system.
• Safety locks in each column spaced every 3".
• Automatic arm restraints withstand over 2000-pounds of side force.
• 3/8"(10mm) High-strength multi-strand galvanized steel equalizing cable.
• Oversized cable sheave diameter reduces cable fatigue.
• Four triple-telescoping arms.
• ALI certified.

Included: 

• 10AP-168 Two-Post Lift
  
• Frame Cradle Pads
• Medium Adapters
• Tall Adapters
• Air-Electric Workstation

Specifications

Model  10AP-168 PRO  Lifting capacity  10,000 lbs. / 4,536 kg  Max. Capacity  5,000 / 2,268 kg (Front Axle) 5,000 / 2,268 kg (Rear Axle)  A – Max. Rise  69 in. / 1,753 mm  B – Lifting Height  73 in. / 1,854 mm  C – Max. Lifting Height  82.5 in. / 2,095 mm  D – Min. Height  4 in. / 102 mm  E – Overall Height  168 in. / 4,267 mm  F – Overall Width  135 in. / 3,431 mm (Narrow) 145 in. / 3,683 mm (Wide)  G – Outside Columns  127.5 in. / 3,238 mm (Narrow) 137.5 in. / 3,492 mm (Wide)  H – Inside Posts  108.5 in. / 2,756 mm (Narrow) 118.5 in. / 3,010 mm (Wide)  I – Drive-Thru  92 in. / 2,337 mm (Narrow) 102 in. / 2,591 mm (Wide)  J – Floor to Top Switch  163 in. / 4,140 mm  K – Front Arm Reach  22 in. / 559 mm (min) 47.5 in. / 1,206.5 mm (max)  L – Rear Arm Reach  29.5 in. / 750 mm (min) 57 in. / 1,448 mm (max)  Max. load per Lift Arm  2,500 lbs. / 1,134 kg  Screw Pad Adjustment  2 in. / 51 mm  Time to Full Rise  ≈ 45 seconds  Motor  220 VAC, 60 Hz, 1 Phase  Sound  <70 dB

*Specifications subject to change without notice

WARNING: Cancer and Reproductive Harm

Downloads

 Manual

 Brochure

**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.