Baileigh WR-84V 220V 1 Phase CNC Router 4x8' Table w/ T-Slots, 7.5HP Spindle (Vacuum Ready, Pump Sold Separately)
- Brand:
- Baileigh
- SKU:
- BA9-1019185
- Condition:
- New
Factory Shipped
Factory Shipped
Baileigh WR-84V 220V 1 Phase CNC Router 4x8' Table w/ T-Slots, 7.5HP Spindle (Vacuum Ready, Pump Sold Separately)
With a welded steel frame, the WR-84V is built to last. Unlike many competing tables, this model ships fully assembled and comes with software, tooling, and a dust shroud.
Features
- 4’ x 8’ table to fit common bulk industrial material sizes.
- Perfect for solid wood processing, making closet doors, furniture, signs, and much more.
- 0 to 18,000 rpm variable spindle speed range.
- 7.4 hp spindle has the power to cut hardwoods quickly and precisely.
- Spindle is air-cooled to prevent overheating, prolong the machine’s lifespan, keep it producing high-quality cuts.
- 15,000 mm per minute maximum engraving or travel speed.
- Solid steel gantry can tackle hardwoods at high speeds without flinching.
- Stepper motors with square rails ensure smooth movement along the X, Y, and Z axes.
- Use the handheld digital controller to move the spindle, adjust the speed, and go through your design.
- Comes standard with software that allows you to set up almost any kind of design. (Details below.)
- Upload your cut pattern to the table with a USB drive.
- Rack and pinion mechanism holds up over long periods of heavy use and allows for more fluid and precise movement than a ball and screw mechanism.
- 4 collets accept any standard tooling profiles with ?”, ¼”, 3/8", and ½” bit sizes.
- Includes 10 different tooling profiles.
- Steel T-clamps hold the material down on the table to reduce vibrations and prevent errors.
- Table is preplummed 4 vacuum zones, each with a separate valve and handle, ready to accept optional 7hp vacuum pump *Sold separately.
- Extremely rigid steel structure reduces vibrations and helps the table stay accurate for years.
- Dust shroud covers the spindle and vacuums out sawdust and wood chips while you’re cutting.
BOBCAD-CAM EXPRESS DESIGN SOFTWARE (INCLUDED)
The WR-48 comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the table via a USB drive. To learn more or download a free trial, click the BobCAD-Cam logo above.
Specifications
| Item Number | WR-84V |
| Shipping Weight | 3000lbs |
| Actual Working Area | 97" x 48" |
| Spindle | 7.4hp |
| Z Axis Stroke | 5.375" |
| Maximum Moving Speed (Inches Per Minute) | 590 |
| Maximum Engraving Speed (Inches Per Minute) | 590 |
| Reposition Accuracy | 0.0019 |
| Tool Diameters | ER32 |
| Power | 220V Single Phase |
| Length | 118" |
| Width | 78" |
| Height | 65" |
| Weight (lbs) | 2500 |
| Table Style | T-Slot with Vacuum Option |
| Notes | Table comes ready to accept an optional vacuum pump. Pump must be purchased separately. |
| AMP Draw | 35 at full load |
| Shipping Dimensions (Inches) | 124x86x70 |
*Specifications subject to change without notice.
WARNING CA Proposition 65 Message
Notes
Table comes ready to accept an optional vacuum pump. Pump must be purchased separately.Downloads
Warranty Information
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791
Baileigh WR-32 CNC Router Table
$13,728.06
$11,174.00
