Baileigh BP-3360NC Press brake
Built with a steel frame, this hydraulic press brake runs smoothly in production and makes crisp bends. We designed this machine for simplicity. You can learn to use it in 5 minutes.
- Produces up to 33 tons of pressure.
- Bends sheet metal up to 61” wide.
- Maximum capacity of .078” thick sheet metal across the machine’s full width.
- 3 hp main motor requires 220-volt 3-phase power.
POWERFUL, EASY-TO-USE HYDRAULIC SYSTEM
- Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production.
- 2 encoder-controlled hydraulic cylinders move the top beam.
- Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time.
- It takes a just few seconds to change the top beam pressureand the top position of the stroke (for more or less travel).
- You can set a timer for bend delay to hold the beam down at the bottom of the stroke, so the bend keeps its shape.
- 2 hand wheels let you adjust the position of the beam and back gauge for consistency across the entire width of the beam.
- Foot pedal brings the stroke up and down, leaving your hands free to position the material.
- Motorized back gauge rides on a solid ball screw trolley mechanism.
- Back gauge encoder shows its position on its own DRO.
- Parallel mechanism on the beam synchronizes the top and bottom die to deliver better quality bends across the entire width of the machine.
RIGID STRUCTURE AND LOW MAINTENANCE
- Heavy electrowelded frame, made of solid plate steel, keeps this press brake accurate and running smoothly in production for many years.
- Rugged 3,300-pound construction supports the hydraulic pressure, so the machine stays strong at full capacity.
- Upper beam rides on a hardened, stabilizing track, coupled together by 3 axes of bearings, to ensure high accuracy between both dies at any position of the stroke.
- Includes a set of hardened single-Vee American tooling.
- Accepts standard press brake tooling, giving you a wide variety of options.
- Comes with front material rests (or support arms), which some competing machines do not include.
- 6-light safety curtain helps protect you from injury. This guard stops the machine from running if your hand passes through the light beam.
- 4 grease zerks let you add oil every few months.
- Large hydraulic reservoir on the back allows for convenient fluid changes every 6 to 8 months.
FAST SHIPPING AND LIFETIME SERVICE
- Typically in stock and usually ships in 72 hours.
- Most replacement parts are in stock at our Wisconsin headquarters, so we can get them to you without delay.
- Comes covered by a 1-year parts warranty.
- We provide lifetime technical support by phone. All of our reps have hands-on machine experience. Call us whenever you need help and advice on a project.
|Country of Manufacture||Taiwan|
|Return Speed||2.36" / sec.|
|Maximum Pressure||33 tons|
|Oil Capacity||24 gal|
|Bending Capacity Max Length Max Thickness||61" / .078"|
|Approach Speed||3.14" / sec.|
|Back Gauge Motor||1/2 hp|
|Bending Speed||.275" / sec.|
|Main Motor||3 hp|
|Distance Between Housings||49.21"|
|Distance From Table To Ram||9.84"|
|Power||220V / 3-phase|
|Shipping Weight||3,300 lbs.|
|Shipping Dimensions||67" x 47.5" x 80.75|