Hofmann Geodyna 9000P Diagnostic Wheel Balancer with Touch Screen and 3D Camera Technology
- Brand:
- Hofmann
- SKU:
- EEWB771AP230
- Condition:
- New
Factory Shipped
Factory Shipped
Hofmann Geodyna 9000P Diagnostic Wheel Balancer with Touch Screen and 3D Camera Technology
A video wheel balancer for cars and light trucks, the geodyna® 9000p features fully automatic non-contact acquisition of all data via 3D imaging technology and five high-resolution cameras, the Power Clamp clamping system, pinpoint easyWEIGHT laser, plus a touch screen interface for unequaled usability, performance and precision.
Features
- Automatic Acquisition - Non-contact 3D imaging technology is virtually error-proof: just clamp the wheel, close the guard and let the geodyna 9000p do the rest. Automatic and non-contact detection of wheel dimensions, balancing mode, number and position of spokes, amount and position of weights, lateral and radial run-out of tire and rim, match mounting and geometric issues.
- Run-Out Measurement - Non-contact 3D imaging technology scans the rim and tire profile to measure radial tire run-out, bead seat run-out on the bare rim and radial and lateral rim run-out on both sides.
- 3D Imaging - Five high resolution laser cameras scan the complete rim and tire profile to provide visual evidence of results, increase customer awareness and improve customer satisfaction.
- Run-Out Force Vectoring (RFV) - Determines the virtual loaded run-out contact patch of the wheel assembly and calculates the spring rate by measuring tread width, sidewall height, surface singularities and estimated tire pressure.
- Sidewall & Tread Analysis - The wheel is scanned to within 0.1 mm accuracy to examine all externally visible scratches, cuts, bulges, blisters, flat spots and uneven wear-out that could potentially lead to safety issues.
- Tire Wear-Out Prediction - Predicts the tire wear-out point to help prepare the customer for when a replacement Ithaqua be needed.
- Advanced Spoke Detection - Detects spokes to provide optimum placement of weights, allowing for accurate balancing of alloy spoke rims while preserving their visual appearance.
- Wheel Data Freeze - Allows the operator to save the data detected on the first rim of a set of identical wheels, reducing data acquisition time for subsequent identical wheels.
- Smart Profile - Automatically detects optimum balancing program by determining amount, position and type of the balance weights on the basis of rim dimensions saved in memory and imbalance data determined during measurement.
- Patented Automatic Power Clamp - Ensures consistent and constant wheel-clamping force- ensuring accurate balance on all wheels.
Specifications
Wheel clamping | Power Clamp |
Diameter of shaft | 40 mm |
Measuring speed | < 200 rpm |
Balancing accuracy | 0.035 oz (1 g) |
Angular resolution | ± 0.35° |
Length of shaft | 225 mm |
Start/Stop balance time - Check spin (Wheel 195/65R15) | 8 s |
Manual rim diameter range | 8" - 32" |
Manual offset range | 1" - 20" |
Manual rim width range | 1" - 20" |
Semi-automatic rim diameter range | 8" - 30" |
Semi-automatic rim width range | 1" - 20" |
Automatic rim diameter range | 14" - 26" |
Automatic offset range | 4.7" - 16.3" |
Automatic rim width range | 3" - 15.8" |
Max. wheel diameter | 37" |
Max. wheel weight | 154 lbs (70 kg) |
Motorized | Yes |
Power requirements | 230 VAC 1ph 50/60 HZ – 1.1A |
Dimensions LxWxH (Unit only) | 57" x 39" x 67" |
Net Weight | 341 lbs (155 kg) |
Downloads
Hofmann equipment Warranty Policy
Hofmann USA products carry the following warranties:
1. HOFMANN WHEL BALANCERS:
- LABOR 6 MONTHS
- PARTS 1 YEAR
- ELECTRONIC CIRCUIT BOARD 3 YEARS
- ELECTRIC MOTOR 5 YEARS
2. HOFMANN BRAKE LATHES:
- LABOR - 6 MONTHS
- PARTS - 2 YEARS
- ELECTRIC MOTOR - 1 YEAR
3. HOFMANN TIRE CHANGERS:
- LABOR - 6 MONTHS
- PARTS - 1 YEAR
- ELECTRIC MOTOR - 3 YEARS
- AIR MOTOR - 1 YEAR
- TRANMISSION - 3 YEARS
4. HOFMANN WHEEL ALIGNERS:
- LABOR - 6 MONTHS
- CIRCUIT BOARDS, PC’S, CRT & LCD - 3 YEARS
- PARTS & PRINTER - 1 YEAR
5. HOFMANN LIFTS:
- LABOR - 1 YEAR
- PARTS - 1 YEAR
- POWER PACK - 18 MONTHS (1 YEAR SCISSOR ALIGNMENT)
- HYDRAULICS - 1 YEAR