AirCat 1880-P-A 1" Heavy Duty" Pistol Grip Aluminum Impact Wrench
1,850 (ft-lb) Loosening Torque
Great Tool for removal of spring bolts, maintenance of buses, trucks, farm machinery, truck tire work and major engine tear downs
Built with a durable Twin Hammer Mechanism
The twin hammer design has the hammer able to slide and rotate on a shaft, with a spring holding it in the downwards position. Between the hammer and the driving shaft is a steel ball on a ramp, such that if the input shaft rotates ahead of the hammer with enough torque, the spring is compressed and the hammer is slid backwards. On the bottom of the hammer, and the top of the anvil, are dog teeth, designed for high impacts.
- 1700 ft-lb maximum working torque
- 1900 ft-lb loosening torque
- Molded hammer case protective cover
- Uniquely designed combined rear gasket / protective band prevents band from moving out of position
- Rugged bolt-on side assist handle
- Low wear pinless hammer
- Noise level to 88 dBA
- Combined reverse & power management switch provides control
- Square Drive (in.): 1
- Air Cons. (CFM): 16
- Bolt Capacity (in.): 1-1/4
- Air Inlet (in.) NPT/BSP: 1/2
- Rec. Hose Size (in.): 1/2
- Weight (lbs.): 23.5
- Length (in.): 11.75
- Free Speed (RPM): 4,800
- Impacts Per Minute (IPM): 900
- Max. Torque (ft-lb): 1700
AIRCAT and NITROCAT air tools are warranted to be free from defects in material and workmanship for 2 years from date of purchase. We will repair or replace; at our option any defective part or unit which proves to be defective in material or workmanship during this 2 year period. The foregoing obligation is AIRCAT and Florida Pneumatic's sole liability under this or any implied warranty, under no circumstances shall it be liable for any incidental or consequential damages.
This warranty applies to the tool only. The warranty does not apply to any attached accessories/consumable products; such as drill chucks, sander backing pads, air hammer retainers and chisels or “kit” accessories or any other accessory included with the tool.
Any repair due to normal wear and tear, abuse, misuse, modification of the tool or repair attempts (by other than an AIRCAT or Florida Pneumatic Authorized Service Center) are not covered by this warranty.
Return your tool to an AIRCAT or Florida Pneumatic Authorized Service Center freight prepaid. Be sure to include your name, address, copy of purchase with date and description of the suspected defect.
AIRCAT whose policy is continued product improvement reserves the right to make changes in design or construction at any time without incurring any obligation on tools previously sold.
Tune-Up and Head Kits for all AIRCAT PNEUMATIC impact wrenches and ratchets are available. For Authorized Service Centers, please visit www.aircat.com