AirCat 1680-6 "Xtreme Duty" 3/4 inch Impact Wrench Extended Anvil
Extreme-Duty 3/4" Industrial Grade Aluminum Impact Wrench
Recommended Use: Large Vehicle Tire Removal, Bus, Large Truck, Tractor, mining, industrial bolt assembly
High Performance motor maximizes Torque output
Patented Ergonomically Designed Handle
Patented Quiet Tuned Exhaust
Durable Hard Hitting Twin Hammer Mechanism
The TWIN HAMMER Mechanism consists of 2 hammers in a closed cage which rotates around the anvil. This design allows the hammer to hit at the same time on both sides of the anvil. A twin hammer design is very durable and particularly suitable for long operating cycles. A further advantage is that the design consists of few individual parts and this makes it very easy to service. The twin hammer is lubricated by grease. Lubrication can be easily done from outside via greasing fitting without opening the housing. The TWIN-Hammer design is best used for industrial, all-around automotive applications, tire service and assembly.
- 1600 ft-lbs of Maximum Torque
- Durable hard hitting twin hammer mechanism
- Improved compact design
- 6" Extended Anvil
- Patented “Silencing Technology” reduces noise to 89 dBa
- Patented AIRCAT grip
- Combined power management F/R switch
- Triple heat treated Ni-Cr-Mo alloy steel hammer mechanism
- Designed for the very toughest working conditions
- Combined through hole and friction ring socket retainer
- Square Drive (in.): 3/4 x 6
- Air Cons. (CFM): 8
- Bolt Capacity (in.): 1
- Air Inlet (in.) NPT/BSP: 3/8
- Rec. Hose Size (in.): 1/2
- Weight (lbs.): 14.8
- Length (in.): 8.9
- Free Speed (RPM): 4,500
- Impacts Per Minute (IPM): 950
- Max. Torque (ft-lb): 1600
AIRCAT and NITROCAT air tools are warranted to be free from defects in material and workmanship for 2 years from date of purchase. We will repair or replace; at our option any defective part or unit which proves to be defective in material or workmanship during this 2 year period. The foregoing obligation is AIRCAT and Florida Pneumatic's sole liability under this or any implied warranty, under no circumstances shall it be liable for any incidental or consequential damages.
This warranty applies to the tool only. The warranty does not apply to any attached accessories/consumable products; such as drill chucks, sander backing pads, air hammer retainers and chisels or “kit” accessories or any other accessory included with the tool.
Any repair due to normal wear and tear, abuse, misuse, modification of the tool or repair attempts (by other than an AIRCAT or Florida Pneumatic Authorized Service Center) are not covered by this warranty.
Return your tool to an AIRCAT or Florida Pneumatic Authorized Service Center freight prepaid. Be sure to include your name, address, copy of purchase with date and description of the suspected defect.
AIRCAT whose policy is continued product improvement reserves the right to make changes in design or construction at any time without incurring any obligation on tools previously sold.
Tune-Up and Head Kits for all AIRCAT PNEUMATIC impact wrenches and ratchets are available. For Authorized Service Centers, please visit www.aircat.com