Welding Accessories

Dent Fix Equipment DF-1690 Boron Killer Tungsten Drill Bit For Boron The DF-1690 Boron Killer spot weld bit is best used with the original Spot Annihilator DF-15DX with its patented Predator Approach prevents slamming of the drill bit into the panel...

Dent Fix Equipment DF-17 Weld Breaker *Hammer pictured not included. Don't use any other tool than the German made DF-17, German steel Weld breaker to separate freshly drilled panels. Use when spot welds are not completely detached because of sealant,...

Dent Fix Equipment DF-503 Maxi Short Welding Rods - 5.5" The DF-503 short welding rods are the replacement rods for the Maxi Multiple Pull Station DF-505/220V and DF-505/110V. Each welding rod is 5.5 inches. The rod is placed in the rod holder and...

Dent Fix Equipment DF-PPBK03 3mm Polypropylene Plastic Rods Plastic: PolypropyleneSize: 3mmShape: RoundPack: 25 piece Consumable plastic repair rods (DF-PPBK03) for the DF-EZN1 (sold separately) and other popular plastic inert gas welders. Made in the...

Dent Fix Equipment DF-PPBK09 9mm Polypropylene Plastic Rods Plastic: PolypropyleneSize: 9mmShape: FlatPack: 25 piece Consumable plastic repair rods (DF-PPBK09) for the DF-EZN1 (sold separately) and other popular plastic inert gas welders. Made in the USA...

Dent Fix Equipment DF507 1Lb thin Wiggle Wire For crease pulling and other similar tasks. DF-507: 1 Lb thin Wiggle Wire .062, 1/16", 16 gauge, approx 60 pieces. Made in the USA.   WARNING: California Prop 65

Dent Fix Equipment DF-15Dx Spot Annihilator Deluxe Kit The Original Spitznagel DF-15DX Spot Weld Drill that applies the cutting pressure pneumatically. You do not have to push on the drill bit. Our patented valved cylinder applies gentle pressure toward...

Dent Fix Equipment DF-1600K The Drill Bit Extender When access is limited or obstructed either by a structural member or other component, we have a solution. DF-1600K The Extender is a spot weld drill bit extension that adds 6" inches of length,...

Dent Fix Equipment DF-1610T Titanium Nitride Drill Bit - 10 x 45mm The DF-1610T Titanium coating on this bit will help prevent the bit from dulling due to overheating. The twist is the same size as the shank which is also 8.0 mm and has a flat spot on it...

Dent Fix Equipment DF-503IILR Hammerhead Long Welding Rods - 11" The DF-503IILR long welding rods are the replacement rods for the Hammerhead and Shark Multiple Pull Station, DF-595II. Each welding rod is 11 inches. The weld rod is...

Dent Fix Equipment DF-503IIR Hammerhead Short Welding Rods - 7" The DF-503IIR short welding rods are the replacement rods for the Hammerhead and Shark Multiple Pull Station, DF-595II. Each welding rod is 7 inches. The weld rod is...

Dent Fix Equipment DF-505DC The MAXI Dust Cover Protect your Maxi (DF-505/220V & DF-505/110V) with the DF-505DC Dust Cover *. The durable material will guard against the dust and debris floating around the shop. Discourage would be "borrowers"...