Welding Accessories

Dent Fix Equipment DF507TK Wiggle Wire - Thick 1lb For Rocker Panels or other similar tasks. DF-507TK: 1Lb thick Wiggle Wire (3/32") .93mm, 12 gauge, approx 30 pieces. Made in the USA.   WARNING: California Prop 65

Baileigh FE-1200 heavy duty portable fume extractor Looking for a fume extractor that can really remove fumes at a high rate? Look no further than the Heavy-Duty Portable Fume Extractor - FE-1200 from Baileigh Industrial. Fume extractors are an...

Baileigh WP-1100 welding positioner If you are in the need for perfect welds on parts that need a lot of handling, then a Welding Positioner is what you need. Turntable positioners feature a large table on the top that rotates at a slow pace to help...

Baileigh WP-450 welding positioner Almost every fabrication shop should have an industrial welding positioner. These simple to use machines add an element to precision to any weld job. The WP-450 from Baileigh Industrial is no exception. This positioner...

Dent Fix Equipment DF-SP360 Shunting Pliers Squeeze-type resistance spot welding (STRSW) sometimes requires additional measures, in the form of shunting the current flow, to create a successful spot weld. Conductive coatings on steel, such as zinc or...

Lisle 51900 Spot Weld Chisel Features Use to separate panels after the spot weld has been drilled out. Drive the blade with a hammer from the end or the side through the panel seam. Panels are separated without damage. The blade is sharpened on...

Dent Fix Equipment DF-103 Trigger Switch Trigger switch for the DF-1 Stud Welder WARNING: California Prop 65

Dent Fix Equipment DF-503KEM Magnetic Key Electrode The Magnetic Key Electrode is an accessory for the DF-505 Maxi (sold separately) and gives it the ability to weld keys (sold separately) to panels for bridge pulling with the DF-505BP (sold separately)...

Dent Fix Equipment DF-503KF Weld Keys - Flat Quality weld keys for steel bridge pulling. Flat shaft intended for panel repair pulls. 100 pc With the DF-503KEM Magnetic Key Electrode and DF-505 Maxi (both sold separately) the keys can be...

Dent Fix Equipment DF-503L Maxi Long Welding Rods - 10" The DF-503L long welding rods are the replacement rods for the Maxi Multiple Pull Station DF-505/220V and DF-505/110V. Each welding rod is 10 inches. The rod is placed in the rod holder and...

Dent Fix Equipment DF-WG1 Magnetic Weld & Ground The DF-WG1 Welding Ground out performs standard magnetic ground block. It is the perfect upgrade for the MAXI Steel Dent Pulling Station but the universal ground also works with most dent...

Baileigh FE-850 portable fume extractor Fume extractors are an important part of any welding shop. They help keep the areas clean and the air the workers breathe safe. The FE-850 fume extractor is a portable unit that has many of the feature that most...