Mahle ATX-3+Boost Automatic Transmission Fluid Exchange w/Dipstick Tube-Cooler Line Option
The FluidPRO ATX-3 Automatic Transmission Fluid Exchange System offers precise and accurate fluid measurement and simple operation with minimal technician input to maximize efficiency.
Features
- Adaptable 'Dipstick' or 'Cooler' mode selector, start engine indicator.
- Electronic diode illuminated keypad, fluid flow direction indicator verifies correct hook-up.
- Transmission diagnostic pressure gauge for a more effective exchange process.
- New and used fluid sight glasses improve service accuracy.
- Automatic fluid level adjustment +/- 1/2 quarts.
- Digital weight scale technology for accurate fluid exchange.
- Patented bypass circuit increases safety for vehicle protection.
- Fast full exchange service times of 2 to 5 minutes and 8 to 14 minutes in 'Dipstick' mode.
Specifications
| Adapters | Cooler line connection. Valved couplers for minimum spill. Standard adapters for Ford, GM, Chrysler, & Universal. |
| Controls | Microprocessor with digital keypad & light emitting diodes. |
| Dimensions (H x W x D) | 45 in x 28 in x 26.5 in (112 cm x 70 cm x 67 cm. |
| Fluid Tanks / Types | 26 quarts (24.6 liters) each for both new & used fluids / Multiple fluid capability. |
| Hoses | 10 ft. (3 m) black & red (exchange); 8 ft. (2.5 m) black (empty used tank) ATX-3+Boost also includes 5 ft. (1.5 m) clear, attached to 8 ft. (2.5 m) lack hose for dipstick mode. |
| New Fluid Pump | Positive displacement gear pump, 4 quarts (3.8 liters) per minute/includes diaphragm pump, 7.2 quarts (6.84 liters) per min. Diaphragm pump increases fluid suction rate in low-flow/temperature controlled transmission in both ATX-3+Boost units. |
| Operating Range | Cooler Mode: 32° to 122°F (0° to 50°C) Dipstick Mode: 42° to 122°F (5.5° to 50°C). |
| Power Source | 12 VDC - 10 Amp. |
| Process Time | 3 to 6 minutes average full exchange. Dipstick Mode is available on the ATX-3+Boost with 8 to 14 minutes* average full exchange. |
| Scale Accuracy | ±0.03% over usable range. |
| Weight | 244 lbs. (111 kg). |
Warranty Policy
For Workshop units = It is 1 year for parts and labor.
For ShopPro (lifts and jacks) = lifetime warranty from defective materials and workmanship. Other than that 1 year as far as wearable parts go.
For Parts = It is 90 days.
It is important to always evaluate with Tech Support about every warranty issue. For that, call 800-562-4791 for getting help.
