Bendpak 10AP 10K Capacity Two-Post Lift
The 10AP 2 post lift offers exceptional direct-drive lifting performance. This industrial-strength 2 post car lift guarantees cutting-edge technology, top of the line materials, a design that's ahead of its time and a 10,000-lb. lifting capacity.
BendPak's all-new AP series of two-post lifts feature a revolutionary design that factors the best qualities of today's 2 post lift types into a completely new concept in car lift engineering. The result is a lift unlike any other two-post lift on the market, purposefully designed for extreme use, high loads and operator safety and efficiency.
Our 10AP Series offers the convenience of wide or narrow installation wrapped up into one configurable package. This durable, safe, and reliable car lift features an expandable top beam and Bi-Metric arms to suit virtually every vehicle lifting requirement – symmetric or asymmetric. The simple, yet highly sophisticated lift design keeps service and maintenance costs to a minimum, delivering lower operating expenses and higher productivity.
Features
- Durable powder coat finish.
- Expandable top beam accommodates wide or narrow drive-thru configurations.
- Double-telescoping screw pads offer increased versatility.
- Padded overhead safety shutoff bar.
- Exclusive Bi-Metric arm design for more versatile arm positioning.
- Single-point safety release.
- Drop-end arms provide a lower pad height.
- Dual hydraulic direct-drive cylinders.
- Oversized 53" & 59" tall carriages for superior strength and durability.
- Electric / hydraulic HVLP power system.
- Self-lubricating dura-glide UHMW polyethylene bearing system.
- Safety locks in each column spaced every 3".
- Automatic arm restraints withstand over 2000-pounds of side force.
- Heavy-duty 1/2" aircraft-quality equalizer cables.
- Oversized cable sheave diameter reduces cable fatigue.
- Four triple-telescoping arms.
- ALI certified.
Specifications
| Model | 10AP |
| Lifting capacity | 10,000 lbs. / 4,536 kg |
| Max. Capacity | 5,000 / 2,268 kg (Front Axle) 5,000 / 2,268 kg (Rear Axle) |
| A – Max. Rise | 69 in. / 1,753 mm |
| B – Lifting Height(1) | 73 in. / 1,854 mm |
| C – Max. Lifting Height(1) | 82.5 in. / 2,095 mm |
| D – Min. Height(1) | 4 in. / 102 mm |
| E – Overall Height | 145 in. / 3,683 mm |
| F – Overall Width | 135 in. / 3,431 mm (Narrow) 145 in. / 3,683 mm (Wide) |
| G – Outside Columns | 127.5 in. / 3,238 mm (Narrow) 137.5 in. / 3,492 mm (Wide) |
| H – Inside Posts | 108.5 in. / 2,756 mm (Narrow) 118.5 in. / 3,010 mm (Wide) |
| I – Drive-Thru | 92 in. / 2,477 mm (Narrow) 102 in. / 2,731 mm (Wide) |
| J – Floor to Top Switch | 139.5 in. / 3,540 mm |
| K – Front Arm Reach | 24.5 in. / 622 mm (min) 50 in. / 1,270 mm (max) |
| L – Rear Arm Reach | 32 in. / 812 mm (min) 59.25 in. / 1,504 mm (max) |
| Max. load per Lift Arm | 2,500 lbs. / 1,134 kg |
| Screw Pad Adjustment | 2 in. / 51 mm |
| Time to Full Rise(3) | ≈ 45 seconds |
| Motor(2) | 220 VAC, 60 Hz, 1 Phase |
| Sound | <70 dB |
(1) Lifting Height is maximum lifting height of lift with contact pads adjusted to low setting and no adapter(s). Maximum Lifting Height is maximum lifting height of lift with contact pads adjusted to high setting and with both tall and medium adapters installed (Sold Separately). (2) Special voltages available upon request. (3) Actual rise and descent times vary depending on vehicle weight. Specifications subject to change without notice.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201.
Downloads
**Bendpak charges taxes to California**
***It is the buyer's responsibility to unload the freight at their location.
- Capacity:
- 10,000 Lbs
- Free Shipping:
- Yes
CALL US NOW
