Pipe Bender Accessories

Baileigh 1" ROUND PIPE DIE SET 3" CLR (DS-1000P-R300) FOR PIPE ONLY! 1" Round pipe (1.315" OD) die set with a 3 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius...

Baileigh 1" ROUND TUBE DIE SET 3" CLR(DS-1000T-R300) 1" Round tube die set with a 3 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius is based on .063 wall thickness...

Baileigh 1" SQUARETUBE DIE SET 4.5" CLR(DS-1000S-R450) 1" Square tube die set with a 4.5 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius is based on .049" wall...

Baileigh 1-1/2" ROUND PIPE DIE SET 3.75" CLR (DS-1500P-R375) FOR PIPE ONLY! 1-1/2" Round pipe (1.900" OD) die set with a 3.75 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center...

Baileigh 1-1/2" ROUND PIPE DIE SET 5" CLR (DS-1500P-R500) FOR PIPE ONLY! 1-1/2" Round pipe (1.900" OD) die set with a 5 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line...

Baileigh 1-1/2" ROUND TUBE DIE SET 5" CLR(DS-1500T-R500) 1-1/2" Round tube die set with a 5 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius is based on .083 wall...

Baileigh 1-1/2" SQUARETUBE DIE SET 6.5" CLR(DS-1500S-R650) 1-1/2" Square tube die set with a 6.5 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius is based on .083"...

Baileigh 1-1/4" ROUND PIPE DIE SET 3" CLR (DS-1250P-R300) FOR PIPE ONLY! 1-1/4" Round pipe (1.660" OD) die set with a 3 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line...

Baileigh 1-1/4" ROUND PIPE DIE SET 4" CLR (DS-1250P-R400 FOR PIPE ONLY! 1-1/4" Round pipe (1.660" OD) die set with a 4 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line...

Baileigh 1-1/4" ROUND TUBE DIE SET 4" CLR(DS-1250T-R400) 1-1/4" Round tube die set with a 4 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius is based on .083 wall...

Baileigh 1-1/4" SQUARETUBE DIE SET 5.5" CLR(DS-1250S-R550) 1-1/4" Square tube die set with a 5.5 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius is based on .063"...

Baileigh 1-3/4" ROUND TUBE DIE SET 6" CLR(DS-1750T-R600) 1-3/4" Round tube die set with a 6 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius is based on .095" wall...

Baileigh 1-3/4" ROUND TUBE DIE SET 7" CLR(DS-1750T-R700) 1-3/4" Round tube die set with a 7 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius is based on .083" wall...

Baileigh 1-5/8" ROUND TUBE DIE SET 6" CLR(DS-1625T-R600) 1-5/8" Round tube die set with a 6 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius is based on .083 wall...

Baileigh 1/2" ROUND PIPE DIE SET 2.5" CLR(DS-0500P-R250) FOR PIPE ONLY! 1/2" Round pipe (.840" OD) die set with a 2.5 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line...

Baileigh 1/2" SQUARETUBE DIE SET 3" CLR(DS-0500S-R300) 1/2" Square tube die set with a 3 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius is based on .035" wall...

Baileigh 2" ROUND PIPE DIE SET 6" CLR (DS-2000P-R600) FOR PIPE ONLY! 2" Round pipe (2.375" OD) die set with a 6 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius is...

Baileigh 2" SQUARETUBE DIE SET 7" CLR(DS-2000S-R700) 2" Square tube die set with a 7 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius is based on .120" wall...

Baileigh 3/4" ROUND PIPE DIE SET 3" CLR(DS-0750P-R300) FOR PIPE ONLY! 3/4" Round pipe (1.050" OD) die set with a 3 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius...

Baileigh 3/4" ROUND TUBE DIE SET 2.5" CLR(DS-0750T-R250) 3/4" Round tube die set with a 2.5 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius is based on .058 wall...

Baileigh 3/4" SQUARETUBE DIE SET 3.5" CLR(DS-0750S-R350) 3/4" Square tube die set with a 3.5 Inch Center line Radius. Fits on all Baileigh Industrial rotary draw benders that accept drop on tooling (Not RDB-050). Center line radius is based on .035" wall...

Baileigh BT-PRO ECONOMICAL TUBE BENDING SOFTWARE We spent countless hours observing and asking questions to our customers on how they would like to see PRO work. Our customers wanted the power but didn't want the learning curve and frustration that comes...

Baileigh BT-SUPER SE TUBE BENDING SOFTWARE Of course SE provides the ease-of-use found with EZ, the fundamental 3D engineering of EZ3D and the assembly design of PRO. SE provides those extra tools that you will need when you are concerned about setup and...

Baileigh DIGITAL ANGLE FINDER HOLDER FOR AF-360D The AF-360D-Holder makes tube measuring angles while tube bending easier when used in conjunction with the AF-360D digital angel finder. This solid billet holder will clamp on tube from ¾” up...