To build a big successful auto shop company it takes years in the industry to establish oneself as the authority for both products and services. But sometimes you come across visionaries that in a few short years thanks to their experience and high quality products manage to permeate the culture and become everyone’s go to guys. Such is the case with Dannmar Equipment located in Moorpark, California. Dannmar has only been around since 1999 but have established themselves as a major competitor in the field of auto equipment. With high quality equipment at affordable prices, you know you can find the automotive lift (4 post lift or 2 post lift) that is perfect for you, not to mention well within your budget.
JMC Automotive Equipment honors Dannmar Equipment with a complete buyer’s guide of their much sought after products and services.
Dannmar’s 4 post lifts are some of the industry’s most popular 4 post lifts and it’s all thanks to Dannmar’s attention to detail and providing everything a customer needs in one vehicle lift. Each of their 4 post car lift models are engineered with the operator in mind and are: portable, free standing, heavy duty and ideal for any professional automotive shop or even home garage. 4 post lifts from Dannmar are the industry standard for strength, impeccable build quality as well as reliability.
The Commander 7000 4 post lift is one of the most sought after 4 post lifts in the Dannmar line and for all the obvious reasons. It’s ergonomic which means it fits perfectly in a home garage or shop and it is normally used for parking due to its ability to stack two cars in one spot. It saves both space and time at an affordable price. It has also gained its with mostly car enthusiasts as well as the DIY aftermarket.
It is equipped with various height locking positions for parking convenience and a pull lever safety lock control releases all 4 independent safety locks at the same time, which ensures weight distribution while lowering.
Features and Specifications
- Features spring loaded safety locks on each column.
- Simple controls which allow for easy operation.
- Single safety lock release handle.
- Detachable drive up ramps.
- A free standing design
- Lifting capacity of 7,000 lbs
- Height columns: 82” / 2083 mm.
- Lifting time: 45 seconds.
Why it’s the best
- Runways made out of solid plate steel.
- Power unit made in America.
- The runways are coated with the best textured surface available.
- Visible locking system provides added security.
After the popularity of the Commander 7000, Dannmar launched the 7000X which is an extended version of the 7000 allowing you to work with a wider variety of vehicles. It also have 7,000 pounds of lifting capacity but it is wider, longer and taller. It provides extra space which can really make a difference for a vehicle collector or anyone looking for more parking space. It is the ideal lift for that exact application you were looking for. Just make sure you have the room in your garage and you won’t be sorry.
The Commander 7000X is also equipped with multiple height locking positions for parking convenience.
Dannmar’s major series is the new generation of uncompromising lifts, which means its varied uses make it a must have for all auto repair shops and even home garages. With a whopping 12,000 pound capacity, this vehicle lift is ready to take on any task your shop may have. It is equipped with heavy duty, steel braided, aircraft quality cables this 4 post lift has been cautiously designed in order to become the most competitive lift on the market. With the D-12 Dannmar wanted to create a new standard of perfection in the industry and it looks like they achieved it. For such a large four post lift you deserve the best and having tested it, we here at JMC know this lift will not disappoint.
It is equipped with a single hydraulic cylinder under the runway and the heavy duty industrial grade cylinder features single piece construction, pilot fitted, machine steel piston. The entire 4 post lift is coated in a special powder-coated finish that provides extra protection from most abrasives as well as chemicals and weather. This coating is also allows for extra long lift life, increased component durability and a stylish dark finish.
Features
- Industrial grade power unit
- Tru non skid runway grip
- Aircraft quality heavy duty steel cables
- Cable connectors
Four Post Rolling Bridge Jack: DRJ-6 Item 1375901
- This optional scissor style rolling bridge jack provides you with the ability to raise 2 or 4 wheels off the runways which makes your 4 post lift more versatile. It allows you to do wheel or brake work easier. It features a telescoping roller design which allows the runways to be adjusted for different tread widths so you don’t need adapters to work on different vehicles.
Dannmar rolling jacks are designed to be easily removed as well as installed so you can just move your DRJ-6 out of the way when you require extra space.
Specifications
- Minimum support arm width – 35”
- Maximum support arm width – 45.5”
Lifting Capacity – 6,000 lbs.
2 Post Lifts
Along with their collection of 4 post lifts Dannmar’s wide range of 2 post lifts set the industry standard for quality and price. Dannmar has engineered their lifts to exceed the competition when it comes to safety, strength and build quality. And those factors have made Dannmar a household name when it comes to 2 post lifts.
Each 2 post lift features powerful hydraulic cylinders as well as a reliable hydraulic pump assembly. It also has a durable, resistant powder coat finish to keep the value in all of these products for years to come.
If you’re looking for portability, compact storage as well as convenience you won’t find at a more affordable price than the MaxJax. The MaxJax is the perfect 2 post lift for low clearance ceilings and home garages. The MaxJax provides the convenience of a normal two post lift but doesn’t permanently take up a vehicle lane.
Added Features
- It provides an optional motorcycle adapter kit that allows you to safely lift motorcycles as well as ATV’s at a comfortable working height.
- Telescoping arms allow it to reach for those far tough lifting points with precision.
- The MaxJax is a two post lift with built in wheels that permits you to use the lift when you need it and then you can conveniently store it out of the way with ease.
If you thought design does not influence in overall quality, guess again. This vehicle lift was strategically designed to be the workhorse of any small or large auto body shop and will prove to be a valuable asset to increase productivity. The Brigadier 10CX will give you trouble free service for years to come and you’ll be surprised at how affordable it really is.
It is a frequent purchase among shop owners and because of its overall width of 145” this 2 post lift will fit perfectly into most repair bays.
Added Features
- The Brigadier 10CX features automatic arm restraints which lock as soon as the lift is engaged.
- An automatic shut off bar automatically stops the lifting mechanism if there is a vehicle that touches the top of the lift with gives you that peace of mind to know that it will save you thousands on potential damage to the vehicle.
The Brigadier 10AC is an asymmetric two post lift that is engineered to be both rugged and durable. It is a 10,000 pound asymmetric vehicle lift that is designed with posts that are rotated inward by 30 degrees. This characteristic allows the vehicle to be off set back further which provides you or your technicians easier access.
The Brigadier 10AC is quite popular and usually outperforms its main competitors in its class as well as its cost. It is an excellent purchase in everything from the “DuraGlide” polyethylene load bearings, to the heavy duty 3/8” equalizer cable.
To put it simply, the Brigadier 10CX is a wider version of the Brigadier 10AC. It continues to be an asymmetric two post lift and the posts are rotated 30 degrees as well as space further apart which provides the ability to open car doors without dents. Purchasing this two post lift will be a good addition to any shop and it can be angled in narrow repair bays to accommodate fellow lifts.
The Admiral 9000X is a floor plate garage lift that offers benefits that make it a very sough after two post vehicle lift. It is extra wide for those wider vehicles and its extended arm reach will cover most lifting points. Its low profile design is perect for shops and garages with height restrictions.
It features dual “direct-drive” low pressure cylinders that minimize leakage as well as reduce the workload placd on the hydraulic system which saves you maintenance costs. Its other features are 16 indicidual maintenance free UHMW load bearings, single piece columns, and oversized cable sheaves which extend life expectancy of moving suspension components.
When looking for more space in your garage look no further than a specialty lift and Dannmar offers these lifts with the utmost quality and at the lowest costs. Dannmar are known for their high quality specialty lifts being at affordable prices but remember low costs doesn’t necessarily mean cheap product. These lifts are engineered to be durable and reliable as well as perfect for examining, repairing and replacing parts for your vehicle.
The new and completely redesigned Cadet 6000XL is an improved version of the Cadet 6000 which was a fan favorite to specialty lift enthusiasts. It has the same 6000 lifting capacity but it has higher grade materials, more steel and tweaked to improve overall performance.
The Cadet 6000XL is a 6000 pound capable lift that is ideal for wheel service shops. You will be glad to know it doesn’t take up an extra bay and you’ll find it to be very helpful with its ability to be moved out of the way when not in use.
You should also keep in mind its arm assemblies which have one of the widest range of movement in the industry which adds to its list of credentials. With more than a few safety lock bars, a reliable power unit it is the perfect buy for tire shops.
Wheel Service
For heavily tested tire changers of utmost quality and value, look no further than Dannmar’s line of tire changers. These tire changers have gone through rigorous testing as well as engineering, QC and real world trials. At JMC Automotive Equipment we’ve carried these tire changers since they were released into the market and recommend these over other tire changers. We supply the T-100 1381202.
The T-100 is a high volume machine for tire shops as well as repair centers and is miles ahead of the competition with its wide array of ergonomic quality of life design cues.
Features
- Easy to use: It offers foot pedals that operate the high torque electric turntable as well as the jaw clamp and bead blasting system.
- A wheel clamping system: internal/external 4 clamps
- Table clamping cylinder: Dual pneumatic cylinders.
- A standard water filter
- A standard oiler/lubricator
- Bead Breaking system: Dual position blade (pneumatic)
- A standard air regulator
- Through a bead seating system through clamps it provides a powerful jetblast
Wheel Balancers
For a highly accurate wheel balancing system, Dannmar offers the B-100 which provides accuracy, durability and unbeatable value. This wheel balancer will impress you for years to come.
Features
- High tech accelerometer sensor which provides accurate results
- Standard with SUV balancing modes
- Equipped with motorcycle wheel calibration mode
- Truck cone / spacer ring adapter set
- Rear cone mount spring: standard
- 40mm diameter spindle diameter
If you’re looking for shop equipment remember JMC Automotive Industries supplies most of the Dannmar equipment shop equipment line at the lowest prices. Dannmar’s shop equipment offers a stunning line of tools and accessories for your shop in the Dannmar Manspace line. Dannmar has a great line of equipment so you can be sure you’ll get more for your dollar.
The tornado is a portable bead seating and inflation device that was engineered for tubeless tires. The Tornado blasts a powerful air burst between the tire and rim to help seat stubborn beads fast. It is usually utilized in conjunction with an inflation hose, the tornado forces a high powered compressed air blast into the tire body that forces the sidewalls to seal on the wheel thus allowing the inflation hose to pressurize the air. It is a great addition to any garage or tire shop.
This rolling seat is a great addition to any shop and in no time will prove to be a great accessory in any under car situation. Rest your feet and back with the Dannmar Rolling work seat.
This heavy duty air drain allows users to use an air compressor with Dannmar’s unique valve configuration to easily transfer the used oil from the 20 gallon tank to the user’s own secondary container.
This air hose is oil resistant and is designed for many applications as well as weather conditions. It provides 50 ft. with 250 PSI pressure and its bend restrictor prevent hose damage.
- Steel Hose Reel Item 116911
This steel hose reel includes 50ft. of 3/8 rubber hose and 4 way non snag rollers reduce hose wear. It is made out of heavy gauge, powder coated steel.
As briefly mentioned earlier, Dannmar is a company that in only 15 years has managed to make a name for itself with its line of products that are perfect for any large or small business as well as any garage. Dannmar’s product line may not be as extensive as its competitors but they’re philosophy promotes quality vs quantity and it will be difficult to find more affordable specialty lifts, two post lifts or four post lifts.
Here at JMC we are proud distributers of the Dannmar product line and we are all about providing clients with the best option for all of their auto body and auto repair needs. Contact us today.