GMC EFM-1014CNC 10 ft x 14 Ga Sheet Metal Folder / CNC Folding Machine
Over the past two years, our sheet metal folding machine has become extremely popular amongst the metalworking community. The manufacturing world has demanded more of this model than any other Sheet Metal Folder.
Features
- ISO 9001 certified.
- Designed in US.
- Meet OSHA and CE safety standard.
- ESA CNC control.
- 16” large Digital glass touch screen.
- Max. 99 bends per program.
- Upto 2000 Programs Storage.
- Profiles library with graphics.
- Programmable Radius Bend.
- Programmable Angle/ Angle Correct.
- 48” CNC back gauge with table and fingers.
- Hardened nose bar and table, up to 48 HRC.
- Comes with one 1” Insert Bar and one 1/2” Insert Bar.
- Yaskawa Servo motors and Drives.
- Schneider electrical components.
- All steel construction for maximum rigidity.
- Safety type foot pedal with handle and E-stop switch.
- Safety 24V low voltage & overload protection.
- power supply is 220V, 3 phase or 208V, 3 phase.
Specifications
| Capacity Mild Steel/hot roll, tensile 60,000PSI Stainless Steel/cold roll, tensile 85,000PSI Soft Aluminum, tensile 28,000PSI Close hemming Open hemming |
14Ga. 18Ga. 10Ga. / 1/8”thick 26Ga. 24Ga |
| Bending Length Capacity | 10'1" |
| Bend Angle Degree, programmable | 0-135 degree |
| Hemming capacity, mild steel | 24 Ga. |
| Hemming capacity, stainless steel | 28 Ga. |
| Large Beam Opening/clamping opening | 4-7/8" |
| Min. Reverse Bend | 1/2" |
| Max, Table Back Gauge Distance | 48-3/8" |
| Min. Table Back Gauge Distance | 1/2" |
| Back Gauge Repeatability | 0.0039" |
| Back Gauge Table Height | 35-3/4" |
| Motor for Bending Leaf | 4 HP 3 Phase 35A Prewired: 220VAC |
| Servo motor for back gauge | 2 HP 3-Phase 220VAC |
| Clamping Motor | 1-1/2 HP 3-Phase Prewired: 220VAC |
| Machine Weight Shipping Weight |
9,850 LBS 10,150 LBS |
| Machine Size (L x W x H) Shipping Dimensions |
168" x 79" x 67" 174" x 80" x 71" |
Warranty Information
GMC Machine Tools Warranty
GMC warranties all machinery sold against failure of defective workmanship or materials which occurs after the product is professionally installed within product specifications and during normal use and operation for the period of one (1) year.
We will replace all parts, that our inspection shows to be defective from a manufacturing standpoint.
Warranty parts will be shipped free of charge to original purchaser.
Labor and or all travel expenses are not included in the warranty and will be charged additionally at market rate should on site repair be ever needed.
If Purchaser decides to return machines within the 1st 30 days of the purchase date, they may do so only with written agreement from GMC, freight prepaid. All machinery returned must be in same condition received.
After GMC inspects the machinery, equipment, GMC will charge a 35% restocking charge due to retuned machines can only be resold as PRE-OWNED OR DEMO WITH reduced market value and limited warranty.
GMC at no time will be liable for injuries, death, property damage, and any consequential damages that result from using our machinery, improper use, improper set up, and installation. Any legal action brought against GMC shall be tried in the State of California County of San Bernardino County.
GMC reserves the right to make specification changes at any time to better improve their product lines to continue to deliver the quality products our customers are used to.
Any machine that has a voltage change, phase converter installed after purchase, or if you forget to add oil into the machine will automatically void warranty. Buyer is fully responsible for parts and labor.
We truly hope you will never need to use this warranty and you have our commitment to work with you diligently If support is ever needed.
We look forward to being of service now and in the future.
