MaxJax Hi-Low Adjustable Upright Creeper Seat


Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Free Shipping
Total Price:
MSRP: $427.00
(You save  $71.00 )
Adding to cart… The item has been added

shipping-buttonjmc.pngMaxJax Hi-Low Adjustable Upright Creeper Seat

Our super-plush adjustable creeper seat is the must-have accessory for the MaxJax portable car lift. Easily converts from a low-profile creeper to a comfortable work seat allowing you to perform work under a lifted vehicle while being in extreme comfort. 

Adjustable Creeper Seat for Increased Comfort

If you’re looking for increased mobility and overall comfort while working under your new MaxJax, put yourself in the driver’s seat with this USA-Made adjustable work creeper. Go from 2.5" low-profile creeper to fully reclined work seat in mere seconds. Because you’ll be seated in an upright position, it provides an effortless way to get from under the car to the tool chest and back again. Fully adjustable, full-padded seat and headrest are each adjustable providing a variety of ergonomic working positions. Smooth-gliding, oil-resistant urethane casters provide effortless movement allowing you to travel freely whether you’re working under a vehicle on your MaxJax, or in the driveway polishing the underside of your boat. Its rugged 3/4" welded tubular-steel frame supports up to 570 pounds and stands up to everyday workshop abuse. Heavy-duty marine-grade vinyl makes it water, stain and abrasion resistant, fire retardant and antimicrobial, plus it’s very easy to clean and maintain.

Never worry about keeping the MaxJax adjustable creeper clean and ready for use. Its 3/4" steel tubing is electro-powder coated to prevent rusting, scratches, and other abrasions. Plus, it's all-around protection means you don't have to worry about any spills that may fall on it. Speaking of protection, this creeper's plush padding is wrapped with heavy-duty vinyl that can be easily cleaned and maintained to keep it like-new for years of operation.


  • Steel tubing is powder coated to prevent rusting.
  • Super plush padding is fully wrapped in heavy-duty vinyl.
  • Includes six 2.5" oil resistant caster rollers that swivel with ease.
  • Capable of holding up to 570-lbs. (259 kg).
  • Ground clearance of 2.5" when fully lowered.
  • Slightly raised headrest for maximum neck and head support.
  • Made in the USA.


 Length  44" (1,118 mm)
 Width  17" (432 mm)
 Height (lowered)  3.25" (83 mm)
 Height (raised)  44" ()
 Weight Capacity  570-lbs. (259 kg)
 No. of Casters  6
 No. of Back Positions  5
 No. of Front Positions  3
 Steel Tube  0.75"
 Shipping Weight  30 lbs. (7 kg)
 Shipping Dimensions  18" × 7" × 45" in (431 mm x 431 mm x 127 mm)
WARNING: Cancer and Reproductive Harm


Standard Warranty

Duration: From the date of purchase by the original Purchaser or 12 months from the date of shipment or whichever comes first.

  • Three-Years (36-Months) Warranty on equipment structure*
  • One-Year (12-Month) Warranty on operating components
  • One-Year (12-Month) Free Shipping** on ground-freight charges related to warranty performance

Optional Extended Warranty

Duration: From the date of purchase by the original Purchaser or 24 months from the date of shipment or whichever comes first.

  • Two-Year (24-month) Warranty on equipment structure*
  • Two-Year (24-Month) Warranty on operating components
  • Two-Year (24-Month) Free Shipping** on ground-freight charges related to warranty performance

Limited Warranty

  1. Who gives this warranty (Warrantor): MaxJax, 5240 Willis Road, Theodore, AL 36582 USA
  2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
  3. What products are covered by this warranty: MaxJax portable lift system
  4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
  5. What is not covered under this warranty:
    1. The cost of labor to make repairs or replacements
    2. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
    3. Any damage caused by using equipment beyond rated capacity and/or capability
    4. Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
    5. Items considered general wear parts such as rubber or plastic pads/protectors, worn casters/wheels, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
    6. Any component damaged in shipment or any failure caused by installing or operating equipment under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
    7. Any component failure caused by rain, excessive humidity, corrosive environments or other contaminants
    8. Rusted components due to improper maintenance or corrosive environments
    9. Cosmetic defects that do not interfere with product functionality
    10. Damage due to incorrect voltage or improper wiring
    11. Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of a MaxJax product
    12. All electrical components are guaranteed for one year (12 months) against defects in workmanship and/or materials when the lift is installed and used according to specifications
  6. Responsibilities of Warrantor under this warranty: Repair or replace with either new or reconditioned unit at Warrantor’s option, component and/or unit which is defective, has malfunctioned and/or failed to conform within duration of the warranty period.
  7. Responsibilities of Purchaser under this warranty:
    1. Provide dated proof of purchase and maintenance records
    2. In some cases, components may be required to be shipped to the nearest MaxJax Authorized Service Center. Freight costs, after 12 months, must be borne by the Purchaser.
    3. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
  8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.

*Equipment structure is defined as any non-moving permanently affixed frame or main body, or sub-structures that are non-moving and permanently affixed or attached to any main equipment structure or frame.

**Free-shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote addresses.

Limitation of Liability

MaxJax shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other than an authorized representative of MaxJax has made any attempt to service or modify the tool prior to its return to MaxJax under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages MaxJax products are provided and sold as is without any express or implied warranties including warranties of merchantability or fitness for particular purpose. No warranties, expressed or implied, will apply after this period. MaxJax may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on Such revised terms shall be effective thirty days from the date of such written notice or posting.