JET Tools Non-Ferrous Circular Saw Blade 350mm x 32mm x 2.5mm x 180T For J-CK350-2/4K
Inspect your saw blade at regular intervals for chips or excessive wear. Replace damaged or dull blades for maximum performance and safety. Always trust genuine JET parts for your JET Tools. They are guaranteed to fit and work perfectly in your equipment.
Features
- M2 HSS Bright finish – 54/56 HRc for use on non-ferrous machines at high RPM.
- 2 pin holes are 11mm diameter / 63mm on center.
- 2 pin holes are 8mm diameter / 45mm on center.
- The first number is the outside diameter of the blade, 350mm.
- The third number is the center hole diameter, 32mm.
- The fourth number is the total number of teeth on the blade, 180 teeth.
- Replacement Blade for JET J-CK350 350mm x 2.5mm x 32mm x 180T Non Ferrous.
WARNING: Cancer and Reproductive Harm
WARRANTY INFORMATION
JET RED ASSURANCE 2-YEAR WARRANTY
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET Tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
JET RED ASSURANCE 2-YEAR WARRANTY
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET Tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
