JET Tools AC1033 7" Brake with 4-way Die
This length brake is designed to work with the 25 ton Ironworker. Brake Tooling includes a standard punch and a four-way die that allows for 1/16", 1/8", 3/16", and 1/4" material to be bent to a 90° angle. The bottom brake die is held with brackets that easily bolt to the mounting table. Repeatable bending is achievable with the combination of Brake Tooling and the Ironworker's electric stroke control.
Features
- Compatible with all Edwards Ironworkers.
- Easily create repeatable bends when paired with the Press Brake Back Gauge.
- Fabricate brackets, frames, pans, and tanks with this Brake with 4-Way Die.
- Includes a standard punch that allows 1/16", 1/8", 3/16" and 1/4" material to be formed to a 90° angle.
WARNING: California Prop 65
WARRANTY INFORMATION
JET RED ASSURANCE 2-YEAR WARRANTY
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET Tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
JET RED ASSURANCE 2-YEAR WARRANTY
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET Tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
CALL US NOW
