Premium 7.5 HP 1 PH 80 GALLON VERTICAL WITH AIR SILENCER-With Pressure Lube Pump
Silent Air Quiet Air Compressor
Engineered and manufactured in the U.S.A. The whisper series compressors reduce stationary compressor DBA ratings by as much as 25%!
The Whisper dissipates compressor intake noise by channeling the intake air through a series of baffle plates and pre-filter media within the silencer cabinet. As a result, the piston intake noise is trapped and dissipated within the silencer structure. As a result, the piston intake noise is trapped and dissipated within the silencer structure. It also acts as a secondary filtration for cleaner air.
Patented Pressure Lubricated 2-stage cast iron pump with dual control design allows for automatic or continuous run rated at up to 70,000 hours based on B-10 bearing life rating
Features
- Pumps are SUPER quiet in operation and built to last!
- Solid cast iron crankcase.
- Precision balanced solid cast iron crankshaft
- Timken-Style stainless steel roller bearings on the front and rear of the crankshaft
- Removable 100% cast iron cylinders
- Re-usable oil filter
- Oil Pressure Gauge
- Eligible for lifetime pump warranty
- Built-in fan, head unloaders, inter-cooler and after-coolers.
- One of the lowest RPM compressor pumps on the market. That’s the Emax difference!
- Not only do you get the big CFM output, but the lower RPM operation also reduces friction and heat buildup to extend pump life!
- Raised pump platform design is a nice feature for keeping your oil cool within the pump.
- Large 1-3/8” output shaft
- High quality ball bearings on the front and rear of the motor shaft
- Large starting and running capacitors
- 15 Service Factor load. This means the motor can be pulled 15% over full load for more break horsepower
- Dynamically balanced armature for low vibration levels
- Automatic Belt Tensioner will allow you to adjust the tension and alignment of your belts with ease and in just minutes.
- Belt guards built right here in the USA with 13 G steel and premium grade expanded metal
- For your safety, our belt guards are OSHA approved.
- Prewired condor starter and pressure switch built into one. Features an actuation- type diaphragm.
- Our air tanks are manufactured right here in the USA and are ASME code compliant in 50 states including California.
- 100% brass check valves with Teflon Seating.
- 100% brass ASME safety valves.
- Automatic Tank Drain with Integrated Dual Timer will do maintenance for you automatically on the time intervals you set to ensure that the condensation is removed
- Prewired magnetic starter
- “Continuous run” feature that maximizes performance and reduces wear on the internal components of your motor.
- For normal workloads in your shop, you can turn off the continuous run and the unit will go back to automatic start/stop operation.
- Taper lock style 2-groove pulleys (not single groove).
- We also use dual 2-groove, B-Style belts to drive our pumps.
Specifications
Motor | |
Voltage available | 230 |
Motor RPM | 1750 |
Motor Phase | Single phase |
Magnetic Starter | Yes |
Amp Draw | 32 |
Recommended Breaker | 50 AMP |
Engine | |
HP | 7.5 |
Pump | |
Pump Model | APP4V1043TP |
Pump Material | Solid Cast Iron |
Pump Drive | Belt Drive |
Pump RPM | 640 |
Max PSI | 175 |
CFM @ 100 PSI | 31 |
Compressor Stage | Two Stage |
After Cooler | Yes |
Oil Type | Oil Lubricated |
Oil System | Full Pressure Lubrication |
Oil Sight Glass | Yes |
Oil Capacity | 2.5 quarts |
Pump Low Oil Shut-off | No |
Tank | |
Tank Size | 80 Gallon |
Tank Outlet | 3/4 Inch |
Tank Drain | Timed Automatic |
Tank Orientation | Vertical |
Accessories | |
Pressure Gauge | Yes |
Air Dryer | No |
Air Filter | Yes |
Overview | |
Weight | 743 Pounds |
Dimensions LxWxH | 38" x 42" x 72" |
Power Type | Electric |
UPC | 815002013190 |
Certifications | CSA, ASME,ETL |
Warranty | 1 Year Standard, 5 Year Extended, Lifetime Extended |
Downloads
Air Compressor Pumps Operating Instruction
Energy efficiency and MAXimum performance. Leaders In Industrial Air Technology. Innovation is in the air.