Dent Fix Equipment DF-1610 10Mm Hsco Spot Weld Drill Bit

$30.50
$26.84
(You save $3.66 )
Brand:
SKU:
DF-1610
UPC:
811662000000
Condition:
New
Availability:
Usually Ships out within 3 to 5 business days
Shipping:
Calculated at Checkout

Dent Fix Equipment DF-1610 10Mm Hsco Spot Weld Drill Bit

Description

The DF-1610 bit is our 10.0mm and the largest diameter High Speed Steel Cobalt (HSCO) spot-weld bit we offer. The twist is larger than the shank which is 8.0mm and has a flat spot on it to be tightened into our DF-15DX Series Spot Weld Drills. This German made bit may be used with off brand spot weld drills.

We also offer this bit with a Titanium heat resistant coating as the DF-1610T. Our drill bits a specifically designed for the abuse of spot weld drilling. Flat ground for strength, centering nib to prevent walking.

Our German made spot weld bits are available in 3 sizes, 6.5, 8.0 and 10.0 mm. These Cobalt high-speed steel mix bits are 45mm long and work with all brands of spot-weld drills

WARRANTY POLICY

Used Product Warranty Claims: A product is considered used when it has been used for more than 1 week and is no longer re-sellable. All used product warranty claims are to be returned to Dent Fix freight pre-paid. All used product will be repaired or replaced and returned to you via regular freight pre-paid. Expedited return shipments are sent freight collect.  Whether to repair or replace is at our sole discretion.
 Air Tools: All our air tools carry a 1-year warranty against manufacturing defects. Customer abuse, such as a lack of proper maintenance, and the damage caused therein is not covered under warranty.​
Consumable: Any item that by its nature or design that wears, gets used up or is permanently changed by its usage is considered a consumable item. Drill bits are a consumable item and as such carry no warranties expressed or implied. There are several procedures the user can implement in order to extend drill bit life, but ultimately the drill bit will break or dull. It is up to the technician to ensure proper usage.
Items with Specific Warranties:
DF-1 Stud Welder:  Lifetime – Chuck of slide hammer & Transformer. 5 year – Trigger switch.
DF-505 “The Maxi”: 5 years on internal components.
DF-601 Surge Protector: Lifetime – return for replacement if red L.E.D. does not light.
DF-900W Aluspot Stud Welder: 5 Years - Internal components.
DF-SPR67 Self-Piercing Riveter: 1 Year - Internal components.
DF-EZN1 & DF-EZN1G EZ Nitrogen Welders - 5 Years - Internal components.
 To extend this warranty, free of charge to One Year (365 days), simply fill out a Dent Fix Product Warranty Card (available upon request - info@dentfix.com) and return it to us within 90 days from the date of purchase. Other warranties may apply, please check your product sheet for more information. This warranty does not apply where: repairs have been made or attempted without the assistance of or by an authorized Dent Fix Repair Center; repairs are required because of normal wear and tear; the tool has been abused or misused or improperly maintained; alterations have been made to the tool.
 In no event shall DENT FIX be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies to both during and after the term of the warranty. 
DENT FIX disclaims liability for any implied warranties, including implied warranties of “merchantability” and “fitness for a specific purpose”, after the term of this warranty.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitations of incidental or consequential  damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.