Dannmar DT-50 Tire Changer, DB-70 Balancer, and Weights Package Deal
Save money and increase efficiency with Dannmar. Dannmar helps you increase your tire shop’s work flow with a durable tire changer teamed with a quick operating wheel balancer. The package features comprise a swing-arm tire changer for direct wheel service and a proven dynamic wheel balancer to ensure smooth-spinning results. With these Dannmar machines, your technicians can stay busy moving tire installs through the shop with shorter wait times. Plus the package program will save you money.
Take advantage of Dannmar’s value packaged deals. This Dannmar tire changer and wheel balancer package consists of a DT-50 tire changer with a swing arm and a DB-70 wheel balancer. The DT-70 tire changer controls are mounted upfront and logically arranged for both speed and ease-of-use. The tire changer is designed to handle the needs of on-the-go shops with its sturdy body, rigid hexagonal vertical shaft and hardened-steel horizontal outrigger support arm that eliminates flex during tire service operations. This also reduces the risk of damaging allow wheels.
The Dannmar DB-70 wheel balancer works on wheels up to a 28" diameter. It is very accurate and a dependable no-frills balancer that features proprietary Digital Sensor Technology for critical reliability and repeatability. Dannmar’s wheel balancer automatically determines the exact weight needed for optimal balance and uses brightly displayed LEDs that show the correct amount and location of weights in just six seconds. And best of all this special package provides more for less.
- High torque electric turntable
- Alloy steel mount and demount head
- Wheel clamping method 4 clamps internal rim clamping
- Capacity 12”– 26” (305 mm - 660 mm)
- Maintenance-free gearbox
- Aluminum pneumatic cylinders
- High pressure polyurethane pneumatic tubing
- Inflation gauge with Integrated air dump valve
- Tool tray/storage
- Enhanced bead breaker blade
- Air regulator
- Inflation restraint
- Forged-steel foot pedals
- Top positioning weight locator
- Inside and outside measuring
- Manual wheel offset distance setting
- Auto-start when hood is lowered
- Wheel holding manual brake pedal
- Truck cone/spacer ring adapter set
- Wheel calipers
- No-mar rear cone mount pressure cup
- Quick-release and mount hub nut
- Tape weight feeder
- LED rolling wheel weight displays
|Motor ||110-VAC, 50-60 Hz, 1-Ph |
|Drive System Type ||Electric / Air |
|Tower Design ||Rigid Fixed / Swing Arm |
|Power Assist Tower ||Not Equipped |
|Bead Seating System ||Turbo Blast / Bead Seating |
|Air Requirement ||110-175 PSI (8-10 BAR) |
|Wheel Clamping Method ||4 Clamps - Internal / External |
|Table Clamping System ||Dual Pneumatic Cylinders |
|Bead Breaking System ||Pneumatic Blade |
|Tower Design ||Fixed |
|Internal Rim Clamping Capacity ||14” – 26” (356 mm - 660 mm) |
|External Rim Clamping Capacity ||12” – 24” (305 mm - 610 mm) |
|Turntable Rim Width Capacity ||3” – 15” (76 mm – 381 mm) |
|Bead Breaker Rim Width Capacity ||3” – 14” (76 mm – 356 mm) |
|Maximum Tire Diameter ||49” (1,245 mm) |
|Noise ||<70 dB |
|Motor ||110-230 VAC, 50-60 Hz, 1-Ph |
|Cycle Time ||7 seconds |
|Balancing Modes ||6 Dynamic / 1 Static |
|Drive System ||Serpentine Poly-V Belt |
|Wheel Braking ||Lever Caliper Brake / Foot Pedal |
|Cones Included ||4 |
|Max. Tire Diameter ||49” (1,247 mm) |
|Max. Tire Weight ||150 lbs. (68 kg) |
|Wheel Diameter Capacity ||10” - 28” (254 mm - 711 mm) |
|Wheel Width Capacity ||1.5” - 20” (38 mm - 508 mm) |
|Balancing Increments ||0.25 or 0.01 ounce |
|Balancing Speed ||260 RPM |
|Accuracy ||+- 1 Gram (.035 oz) |
|Noise ||<70 dB |
Duration: From the date of purchase by original Purchaser or 36-months months from the date of shipment by Dannmar or whichever comes first.
Three Years (36-Months) Warranty on the lift structure [*] [**]
One Year (12-Months) Warranty on the hydraulic cylinder(s) and power unit [*] [**]
One Year (12-Months) Warranty on operating components [*] [**]
One Year (12-Months) Warranty on electrical components (excluding power unit) [*] [**]
1. Who gives this warranty (Warrantor): Dannmar, 1645 Lemonwood Dr., Santa Paula, CA 93060
2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
3. What products are covered by this warranty (Product): Any Dannmar Two-Post or Four-Post Vehicle Service Lift**
4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
5. What is not covered under this warranty:
a. Freight and shipping charges related to warranty performance.
b. Onsite labor or factory labor associated with warranty performance.
c. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service Product in accordance with
instructions provided in the owner’s manual(s) supplied.
d. Any damage caused by overloading Product beyond rated capacity.
e. Items or service normally required to maintain the Product, i.e. lubricants, oil, etc.
f. Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of
manufacturer defect due to material and/or workmanship.
g. Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with
installation and operation guidelines or damaged by contact with tools or surroundings.
h. Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants.
i. Rusted components due to improper maintenance or corrosive environments.
j. Cosmetic defects that do not interfere with Product functionality.
k. Damage due to incorrect voltage or improper wiring.
l. Any failure that results from improper installation or use not according to specifications.
m. Damage caused by disasters such as fire, flood, wind, and lightning.
n. Damage caused by unauthorized attachments or modifications.
6. Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor's option, component which is defective, has
malfunctioned and/or failed to conform within duration of the warranty period. Warrantor will pay reasonable labor costs for the first 12
7. Responsibilities of Purchaser under this warranty/ notice of claims:
a. Provide dated proof of purchase and maintenance records.
b. In some cases, components may be required to be shipped to the nearest Dannmar Authorized Service Center. Freight costs, after
12-months, must be borne by the Purchaser.
c. Use reasonable care in the operation and maintenance of the Products as described in the owner's manual(s).
d. Immediately upon receipt of the Product, Purchaser shall inspect the same. Any claim for shortage must be made within ten days
after Purchaser's receipt. All other claims, including claims for alleged defective Product, must be made within fifteen days after
Purchaser learns of the facts upon which such claim is based, but in no event later than the applicable one, two or five year period
specified above for the specified component(s). All claims not made in writing and received by Seller within the time periods
specified above shall be deemed waived. With respect to any defects incapable of discovery until in use, all claims for any
damages or losses as a result of such defects shall be deemed waived unless made in writing and received by Seller within fifteen
days after Purchaser learns of the alleged defect giving rise to the claim and after the expiration of said periods, but in no event
later than the applicable one, two or five year period specified above for the specified component(s). Purchaser expressly
assumes all liability for all such damages or losses, irrespective of any use which shall have taken place or whether the alleged
defect shall have occurred or been discovered prior to expiration of such periods.
8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according
to the normal work flow at the servicing location, and depending on the availability of replacement parts.
9. *As determined by Warrantor in its sole discretion**For all Dannmar brand Two-Post or Four-Post Vehicle Service Lifts (excluding specialty
lifts, high rise, commercial parking, material handling, or models for particular purpose) manufactured on or following 6/1/2020.
Frequently Bought Together
Please choose options for all selected products