Challenger Lifts SA10 Symmetric/Asymmetric 10,000 pound 2 post Car Lift
Description
Challenger’s SA10 2 post car lift offers 10,000 lb. capacity. You can install the SA10 in either symmetric or asymmetric position, depending on your service needs. The SA10 also features adjustable height and width options to further customize it to meet your needs. Innovative 3-stage front and 2-stage rear arms provide greater overall sweep. Come in and take your best 2 post car lift and enjoy the benefits it has for you, take it and we will install it in your home, garage or workshop.
Features and Benefits
- 10000 pound 2 post car lift
- 3-stage front arms provide greater sweep for versatility and ease of spotting
- Can be installed in either symmetric or asymmetric position, depending on your service needs
- Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
- Adjustable heights and widths provide versatility at installation for service facilities with special constraints
- Single-point mechanical lock release system allows technician to disengage both columns simultaneously
- Padded overhead shut off system prevents vehicle damage
- Premium powder coat finish provides long-lasting durability
- Plated arm restraints and arm pins inhibit rust and provide long-lasting durability
- Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage
Specifications
| Model Number | SA10 symmetric install | SA10 asymmetric install |
| Lifting Capacity | 10,000 lbs. | 10,000 lbs. |
| Lifting Configuration | Symmetric | Asymmetric |
| Arms | 3-stage front/2-stage rear | 3-stage front/2-stage rear |
| Rise Height | 74.5” | 74.5” |
| Overall Height | 136.5” / 142.5” | 136.5” / 142.5” |
| Overall Height (Cylinder Extended) | 142.5” | 142.5” |
| 2’ Height Extension Available | Yes | Yes |
| Overall Width | 129” / 135” | 131.5” / 137.5” |
| Drive-Thru Clearance | 92.75” / 98.75” | 88.5” / 94.5” |
| Floor to Overhead Switch | 131.125” / 137.125” | 131.125” / 137.125” |
| Front Arm Reach | 22.375” / 41.5” | 22.375” / 41.5” |
| Rear Arm Reach | 38.25” / 59” | 38.25” / 59” |
| Screw Pad Height | 4.75” / 6.875” | 4.75” / 6.875” |
| Inside Columns | 106.75” / 112.75” | 101.5” / 107.5” |
| Motor / Voltage | 2HP, 208v-230v, 60Hz, 1Ph | 2HP, 208v-230v, 60Hz, 1Ph |
| Speed of Rise | 43 s | 43 s |
| Ceiling Height Required | 12’ | 12’ |
| ALI/ETL Certified | Yes | Yes |
| Colors Available | Red, Blue | Red, Blue |
Additional Parts and Accessories
| Productivity Accessories | |
| Part No. | Description |
| B10264A | Air/electric workstation with filter/lubricator/regulator |
| B99700 | Tire Tool Manager Work Station with filter/lubricator/regulator |
| TR-07 | Turf Rail Quick Change Attachment |
| SA10EH2 | Optional 2ft Column Height Extensions |
| Footpad Accessories | |
| Part No. | Description |
| B2280PR | NEW wide frame footpad |
| 10300 | Pair of luxury car adapters |
| 10313 | Pair of 6 in. stack adapter extensions |
| 10315 | Stack adapter kit - includes (4) 3 in. Stack Extensions, (2) 6 in. Stack Extensions & (2) Organizer Racks with hardware |
| 10316 | Organizer rack for stack adapter extensions |
| B2260 | Round rubber-style double screw foot pad assembly. For use on 10k 2-post lifts only, 2,500 lb capacity per footpad. |
| Power Upgrades | |
| Part No. | Description |
| 3PH217 | Power Unit Upgrade to 3-Phase - 208V |
| 3PH239 | Power Unit Upgrade to 3-Phase - 230V |
| 3PH469 | Power Unit Upgrade to 3-Phase - 460V |
Download
Challenger Lifts Warranty Agreement
Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.
This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.
This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.
The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.
Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.
Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.
Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml
| Description | Model/Series | Labor | Functional Parts | Structural parts | Extended Warranty Available |
| CL10 | CL10 | 1 Year | 2 Years | 5 Years | Yes |
| 10K 2-Post, 9K 2-Post | LE10, SA10, CLFP9 | 1 Year | 1 Year | 5 Years | No |
| 12K, 15K, 18K 2-Post | CL12, 15000, 18000 | 1 Year | 2 Years | 5 Years | Yes |
| 8K Inground | EVW0820 | 1 Year | 2 Years | 2 years | No |
| 10K Ingrounds | EV1020 | 1 Year | 2 Years | 5 Years | Yes |
| 12K, 15K Ingrounds | EV1220, EV1520 | 1 Year | 1 Year | 5 Years | Yes |
| 14K 4-Post | 4P14 | 1 Year | 1 Year | 5 Years | No |
| 15K 4-Post | 4015 | 1 Year | 2 Years | 5 Years | No |
| 30K 4-Post Cable Drive | 4030 | 1 Year | 2 Years | 5 Years | No |
| 30K, 40K, 60K Chain Drive | 44030, 44040, 44060 | 1 Year | 1 Year | 1 Year | No |
| Rolling Jacks | RJ, SAJ | 1 Year | 1 Year | 1 Year | No |
| Mid and Short Rise | MR-6, SRM-10 | 1 Year | 1 Year | 1 Year | No |
| Scissors | SX14, DX77 | 1 Year | 1 Year | 1 Year | No |
| Mobiles | CLHM | 1 Year | 1 Year | 5 Years | No |
| Accessories | 90 days | No | |||
| Replacement Parts | 90 days | No |
Extended Warranty
An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.
