Challenger Lifts 44030 30,000 Lbs "Chain Driven" Four Post Car Lift

We designed our 30,000 lb. to 60,000 lb. lifts as an economic high capacity lifting solution in a traditional 4-post design. Diamond plated anti-skid runways and ramps provide for positive vehicle traction. The synchro-power system has dual heavy-duty lift cylinders as well as lever controls, which provide variable or synchronous power to the front and/or rear suspension of the lift, making it perfect for lifting large axle vehicles with heavier front or rear ends, including waste trucks and other construction trucks.

Features

30,000 lb. to 60,000 lb. capacity 4-post
310” to 430” max wheelbase
32” wide runways aid for drive-on confidence
10 lock positions provide maximum head room for working underneath vehicles (40K-60K)
Single-point air actuated lock release allows technicians to disengage column locks simultaneously
Diamond-plate approach ramps for positive vehicle traction
Optional 15,000 lb. – 35,000 lb. rolling jacks provide complete optimization for your heavy-duty servicing needs
Available with black columns only

Specifications

Model Number	44030
Lift Capacity	30,000 lb.
A Length Overall	24’ 7½”
B Width Overall	12’ 5½”
C Inside Columns	132 ½”
D Between Columns	233 3/4”
E Height Overall	92”
F Height of Runways	9”
G Width of Runways	24”
H Width Between Runways	54” - 75”
I Max Wheelbase	230”
J Rise Height	68”
Min - Max 4 Wheel Align	N/A
Max 2 Wheel Alignment	N/A
Motor	3HP
Voltage	208 - 230v Single Phase*
Speed of Rise	105 sec.
Amps	30

**Additional Parts and Accessories *Sold Separately**

Part Number	Description
SAJ15	Air/hydraulic only operated rolling jack, 15,000 lb. Capacity
SAJ18	Air/hydraulic only operated rolling jack, 18,000 lb. capacity
10267	Oil drain pan kit, adj. width, 32 gallon
10500HD	HD black powder coated turn plates
44RK30	Ramp kit, pivoting, 36” long for drive thru
44RKE30	Ramp kit, pivoting, 72” long for drive thru

Downloads

Brochure

Manual

Other Models

Model Number	44030	44030AR	44030E	44030EAR	44030X	44030XAR
Lift Capacity	30,000 lb.	30,000 lb.	30,000 lb.	30,000 lb.	30,000 lb.	30,000 lb.
A Length Overall	24’ 7½”	29’ 7½”	34’ 7½”	36’	41’	46’
B Width Overall	12’ 5½”	12’ 5½”	12’ 5½”	12’ 5½”	12’ 5½”	12’ 5½”
C Inside Columns	132 ½”	132 ½”	132 ½”	132 ½”	132 ½”	132 ½”
D Between Columns	233 3/4”	233 3/4”	293 3/4”	293 3/4”	353 3/4”	353 3/4”
E Height Overall	92”	92”	92”	92”	92”	92”
F Height of Runways	9”	9”	9”	9”	9”	9”
G Width of Runways	24”	24”	24”	24”	24”	24”
H Width Between Runways	54” - 75”	54” - 75”	54” - 75”	54” - 75”	54” - 75”	54” - 75”
I Max Wheelbase	230”	230”	290”	290”	350”	350”
J Rise Height	68”	68”	68”	68”	68”	68”
Min - Max 4 Wheel Align	N/A	N/A	N/A	N/A	N/A	N/A
Max 2 Wheel Alignment	N/A	206”	N/A	266”	N/A	326”
Motor	3HP	3HP	3HP	3HP	3HP	3HP
Voltage	208 - 230v Single Phase*	208 - 230v Single Phase*	208 - 230v Single Phase*	208 - 230v Single Phase*	208 - 230v Single Phase*	208 - 230v Single Phase*
Speed of Rise	105 sec.	105 sec.	105 sec.	105 sec.	105 sec.	105 sec.
Amps	30	30	30	30	30	30

* Optional Three Phase Electrical Power Available. Please Specify at time of order.
* Alignment models (AR) include cut outs for turn plates. Turn plates not included.

Challenger Lifts Warranty Agreement

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.

Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.

Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml

Description	Model/Series	Labor	Functional Parts	Structural parts	Extended Warranty Available
CL10	CL10	1 Year	2 Years	5 Years	Yes
10K 2-Post, 9K 2-Post	LE10, SA10, CLFP9	1 Year	1 Year	5 Years	No
12K, 15K, 18K 2-Post	CL12, 15000, 18000	1 Year	2 Years	5 Years	Yes
8K Inground	EVW0820	1 Year	2 Years	2 years	No
10K Ingrounds	EV1020	1 Year	2 Years	5 Years	Yes
12K, 15K Ingrounds	EV1220, EV1520	1 Year	1 Year	5 Years	Yes
14K 4-Post	4P14	1 Year	1 Year	5 Years	No
15K 4-Post	4015	1 Year	2 Years	5 Years	No
30K 4-Post Cable Drive	4030	1 Year	2 Years	5 Years	No
30K, 40K, 60K Chain Drive	44030, 44040, 44060	1 Year	1 Year	1 Year	No
Rolling Jacks	RJ, SAJ	1 Year	1 Year	1 Year	No
Mid and Short Rise	MR-6, SRM-10	1 Year	1 Year	1 Year	No
Scissors	SX14, DX77	1 Year	1 Year	1 Year	No
Mobiles	CLHM	1 Year	1 Year	5 Years	No
Accessories			90 days		No
Replacement Parts			90 days		No

Extended Warranty

An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.