null

Quickjack QJ-5175361 7000TLX-110V Lift + Hangers + SUV Adapter Set Package

Brand:
Quickjack
SKU:
QJ-5175361

Factory Shipped.

Total Price:
$2,598.00 $2,165.00
(You save $433.00)
Free Shipping
Free Shipping

Factory Shipped.

Quickjack QJ-5175361 7000TLX-110V Lift + Hangers + SUV Adapter Set Package

Quickjack 7000TLX 110V Extended 7,000 Lb. Car Lift

Description

7000TLX is a 7,000-lb. capacity, extended-length truck lift that's specially made for raising heavy-duty powerhouses. Its 66" lift point reach is ideal for long-wheelbase vehicles, trucks and SUVs. It even fits under most sports cars and sedans.

The 7,000-lb. capacity 700TLX is the safest, highest-capacity and longest-reaching portable car lift ever made. Vehicle types with lift points that stretch toward the edges of the wheelbase can finally be serviced by a fully collapsible, open-center car lift. Until the 7000TLX , only two-post and four-post lifts could service such vehicles. Even mid-rise lifts, while popular in many auto detailing shops and repair bays, often struggle with unique lift point spreads. Compared to other QuickJack models, the 66" lift point reach on the 7000TLX allows operator access to more trucks and SUVs than ever before.

Despite the longer, beefier construction, the 7000TLX car lift still reaches its max rise in approximately 30 seconds. A QuickJack truck/SUV adapter kit, sold separately, adds extra rise and convenience.

Like our lower-capacity portable car lifts, built-in durable urethane wheels mean the 7000TLX frames can be rolled around, indoors or outdoors, at your convenience. This is our heaviest model, but no bolts are required, and no special wiring is ever necessary.

The 76" frames are longer than our TL models but they’re still convenient to roll and stow around the garage. An SUV or truck bed can make for perfect transportation to the track or other locations. As long as the ground is level, the assembly can be taken outdoors for use on dirt, gravel, grass, asphalt or concrete. Initial setup is fast and easy, and then it’s seconds to get from stow-to-go.

With a collapsed profile just over 3.5", the 7000TLX needs no extra support crossbeams. It’s the perfect car lift for shops with little space to spare and big vehicles to service.

Extended-length car lift design

The 7000TLX portable car lift has been redesigned to accommodate heavy, high-clearance vehicles with long wheelbases. We’ve increased the overall frame length and lift point spread by 6”. This means the minimum lift point spread is now 6” longer, so smaller vehicles may not fit with the 7000TLX.

  • TLX minimum lift point spread: 43"
  • TLX maximum lift point spread: 66"
  • TLX overall frame length: 76"


Features

  • Automatic safety locks

Features dual-position automatic safety locks on each TL frame. As the frames rise, these locks glide securely into place at mid-rise and full-rise. Disengage with a simple flip of the lock bar and your car lift is ready for a smooth descent.

  • Increased lifting height

QuickJack TL models are capable of lifting an extra 3-inches making it easier to perform vehicle maintenance tasks that are both routine and more involved. The extra room gives you more ability and versatility under the vehicle, while doing so in added comfort.

  • One-handed operation

By holding the pendant control in one hand, your other hand is totally free. No cranking or bending during lifting.

  • Accessories to increase versatility

Most QuickJack accessories were developed from customer suggestion and need. We offer many different lifting options and configurations to customize your QuickJack experience to fit your needs and specifications.

 

 

 Lifting capacity  Lowered height  Lifting height
 Lift point spread
 Frame dimensions (ea.)  Other specs
 7,000 lbs. (2,268 kg)
 A - Frame only: 3.5" (89 mm)
 D - With 2" block: 21.5" (546 mm)
 I - Maximum: 66" (1,676 mm)
 K - Width: 12.5" (318 mm)
 Time to full rise: 30 seconds
 
 B - With 2" block: 4" (102 mm)
 E - With 3" block: 22.5" (572 mm)
 J - Minimum: 43" (1,092 mm)
 L - Length: 76" (1,930 mm)
 Power unit weight: 15 lbs. (7 kg)
   
 F - Max. height: 24.5" (622 mm)
 
 A - Height (lowered): 3.5" (89 mm)
 Shipping dimensions (ea. frame):
   
 G - With adapters: 24.25" (610 mm)
 
 Weight: 98 lbs. (45 kg)
 73.75" (L) x 16.75" (W) x 6.25" (H)
   
 H - With adapters + pin: 27" (686 mm)
     (1,872 mm x 425 mm x 155 mm)
         
 Shipping weight: 304 lbs. (138 kg)

What's inside?

  • 7000TLX Left Frame Assembly
  • 7000TLX Right Frame Assembly
  • 1x Hydraulic power unit with control
  • 4x Medium rubber lift blocks (2")
  • 4x Tall rubber lift blocks (3")
  • 2x Short hydraulic hoses
  • 2x Long hydraulic hoses
  • 2x Frame-positioning handles
  • Fittings and thread tape for setup
  • Instruction manual

Requirements:

  • Up to 3 liters of Automatic Transmission Fluid
  • Air source to inflate air cylinders up to 50 PSI
  • Assembly tools

QuickJack Wall Hangers Set

Description

These sleek, black powder-coated wall mounts are the only official hangers designed and engineered by QuickJack. They're guaranteed to safely hold all QuickJack frames when mounted directly into a wall stud. Sold in sets of two.

There are dozens of ways to stow your QuickJack in a garage: lean them against the wall; stack them on top of each other; tuck them together under your vehicle, etc. The opportunities for easy storage are practically endless. Some people prefer to hang their frames on the wall, up and out of the way. These convenient wall hangers are the best way to make that happen.

If you'd like to hang your portable car lift frames on the wall of your garage, our exclusive hangers mount directly into a sturdy wall stud for safe, simple storage. We recommend installing these wall hangers at the same height and high enough so that the frames rest on the floor. This makes it much easier to lift and hang the frames onto the hooks of the wall hangers.

Each mount features a sleek, laser-cut QuickJack logo to provide visible proof that this is the OFFICIAL QuickJack wall mount set. These wall hangers were designed and engineered by the same minds that designed your QuickJack portable car lift, so you know rigorous testing standards were applied and unparalleled safety factors were built in. Real-world testing and advanced computer analysis were performed to ensure quality and long-term resilience.

Now in a matte black powder-coat finish

We made our wall hangers just as sleek as your QuickJack. They now ship with a very durable (yes, we tested) black powder coat finish that matches your QuickJack frames for an even better look in your garage!

We know you'll be impressed by how durable your hangers are. Plus, they look great in any garage environment. If you've been looking for a way to vertically suspend your QuickJack frames, these hangers offer the perfect solution.

Features

  • Sold in sets of two
  • Now in powder-coated black!
  • One size fits all QuickJack models
  • Over-engineered to 150% rated capacity
  • Solid-steel construction
  • Sleek, laser-cut QuickJack logo design
  • Designed and engineered by QuickJack

 

QuickJack wall hangers specifications diagram    
 A - Width: 4.75" (121   mm)
 B Height: 6.75" (172   mm)
 C Depth: 2.25" (57   mm)
 Weight (ea.): 1 lbs.   (0.5 kg)
 Shipping weight: 3   lbs. (1.4 kg)

What's inside?

  • Two (2) QuickJack wall hangers
  • Hardware for mounting

Quickjack SUV & Light Truck Adapter Set / Fits 5000TL/TLX, 7000TL/TLX and 6000ELX Series

Description

This twelve‐piece adapter set increases the service capability of the QuickJack BL-5000SLX/EXT, BL-7000SLX/EXT and 6000XLT series by providing stackable adapters that mount inside the lifting block trays.

Most SUVs and trucks require adapter sets for maintenance. Your portable car lift system is capable of reaching the undercarriage of virtually every vehicle that does not exceed the unit’s lift capacity. Best of all, while using SUV and truck adapters, QuickJack remains perfectly stable and secure at all times.

Take your garage lift to its max extension with as much ease as you would a Mustang or Ferrari. And if you do have a smaller vehicle to work under, it’s easy to replace the adapter set with QuickJack’s conventional stackable rubber blocks takes in no time at all. Just swap them out in the block tray and you’re done!

To support your heavy vehicles, a rugged, cross-textured base pad sits securely in the QuickJack block tray, supporting the same stackable adapters and rounded lift pad that you might see on any frame-engaging car lift. Incredible stability underlines our truck adapter design, maximizing your overall safety. To this end, QuickJack remains CE Certified when the truck adapter set is in use, which means you can enjoy a garage lift that’s truly portable and perfectly suited for light trucks and SUVs.

Why isn’t the SUV & Truck Adapters Set compatible with the BL-3500SLX?

While QuickJack's truck adapters will technically fit in the lifting trays of every model, high-stance trucks and SUVs will weigh over 3,500 lbs. This makes them unsuitable for use with the BL-3500SLX. Plus, the BL-3500SLX features a shorter frame that most likely wouldn't provide adequate balance for longer wheelbases.

We recommended the 7,000-lb. capacity BL-7000SLX or BL-7000EXT for heavy-duty lifting applications.

Features

  • Features removable stacking pin
  • Gain additional 6" lifting height
  • High-quality, rugged lifting Tuf-Pads™ by BendPak provide exceptional grip
  • Fast assembly/disassembly & transport
  • Set of (4) takes up minimal space for easy storage
  • Fits all QuickJack portable car lift models (except BL-3500SLX)

 

suv-light-truck-adapter-dimensions-quickjack-diag.jpg
 A - Overall height: 7.2" (183 mm)
 B - Pad height: 1" (25 mm)
 C - Pin height: 2.8" (71 mm)
 D - Base height: 3.4" (86 mm)
 Shipping dimensions: 10" x 10" x 6" (254 x 254 x 152 mm)
 Shipping weight: 32-lbs. (15 kg)

 

What's inside?

  • 4x Low‐profile round polyurethane contact pads
  • 4x Sliding receivers that accommodate the round polyurethane contact pads and/or the stackable adapters
  • 4x Stackable adapters (3")

 WARNING CA Proposition 65 Message:

ffffff
     
   

Download

 Adapters Sales flyer

Wall Hanger Sales Flyer
 

Standard Warranty

Duration: From the date of purchase by the original Purchaser or 12 months from the date of shipment or whichever comes first.

  • One-Year (12-Month) Warranty on equipment structure*
  • One-Year (12-Month) Warranty on operating components
  • One-Year (12-Month) Free Shipping** on ground-freight charges related to warranty performance

Optional Extended Warranty

Duration: From the date of purchase by the original Purchaser or 24 months from the date of shipment or whichever comes first.

  • Two-Year (24-month) Warranty on equipment structure*
  • Two-Year (24-Month) Warranty on operating components
  • Two-Year (24-Month) Free Shipping** on ground-freight charges related to warranty performance

Limited Warranty

  1. Who gives this warranty (Warrantor): QuickJack, 1645 Lemonwood Dr., Santa Paula, CA 93060
  2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
  3. What products are covered by this warranty: QuickJack portable lift system
  4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
  5. What is not covered under this warranty:
    1. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
    2. Any damage caused by using equipment beyond rated capacity and/or capability
    3. Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
    4. Items considered general wear parts such as rubber or plastic pads/protectors, worn casters/wheels, plastic trays, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
    5. Any component damaged in shipment or any failure caused by installing or operating equipment under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
    6. Any component failure caused by rain, excessive humidity, corrosive environments or other contaminants
    7. Rusted components due to improper maintenance or corrosive environments
    8. Cosmetic defects that do not interfere with product functionality
    9. Damage due to incorrect voltage or improper wiring
    10. Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of a QuickJack product
    11. All electrical components are guaranteed for one year (12 months) against defects in workmanship and/or materials when the lift is installed and used according to specifications
  6. Responsibilities of Warrantor under this warranty: Repair or replace with either new or reconditioned unit at Warrantor’s option, component and/or unit which is defective, has malfunctioned and/or failed to conform within duration of the warranty period.
  7. Responsibilities of Purchaser under this warranty:
    1. Provide dated proof of purchase and maintenance records
    2. In some cases, components may be required to be shipped to the nearest QuickJack Authorized Service Center. Freight costs, after 12 months, must be borne by the Purchaser.
    3. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
  8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.

*Equipment structure is defined as any non-moving permanently affixed frame or main body, or sub-structures that are non-moving and permanently affixed or attached to any main equipment structure or frame. **Free-shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote addresses.

Limitation of Liability

QuickJack shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other than an authorized representative of QuickJack has made any attempt to service or modify the tool prior to its return to QuickJack under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages QuickJack products are provided and sold as is without any express or implied warranties including warranties of merchantability or fitness for particular purpose. No warranties, expressed or implied, will apply after this period. QuickJack may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on www.quickjack.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.

Frequently Bought Together

Please choose options for all selected products