Bendpak TSB-3 Tire Shop Bundle
- Brand:
- BendPak
- SKU:
- BP-5175301
- Condition:
- New
Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Bendpak TSB-3 Tire Shop Bundle
Bundle Savings: (1) XPR-10AS + (1) R76ATR + (1) DST30P + (1) FREE APX-TS1
Bendpak XPR-10AS 10,000 Lb. Asymmetric 2 Post Car Lift
BendPak XPR-10AS Dual-Width, 10,000 Lb. 2 Post Lift (Low profile arms available)
Every XPR-10AS two-post lift features Direct-Drive technology that’s only available with BendPak. The asymmetrical design of this lift has rotated columns, which makes it easier to enter and exit the vehicle and reduces the chance of door dings and dents. If you have a 12’ ceiling, you can have this lift in your shop or home today! A 10K capacity BendPak car lift is a smart addition to any shop or garage.
XPR-10AS lifts include:
- Direct-drive performance
- Tru-Metric arms for every lifting requirement
- Configurable top beam for wide or narrow installation
- User-friendly controls, high reliability, and long service life
- Triple-telescoping front arms and two-stage rear arms
Features
- 10,000 lb. lifting capacity
- Expandable top beam accommodates wide or narrow drive-thru configuration
- Double-telescoping screw pads offer increased versatility
- Added overhead safety shutoff bar
- Exclusive Tru-Metric arm design for more versatile arm positioning
- 30° rotated single piece columns
- Single point safety release
- Drop end arms provide a lower pad height
- Dual hydraulic direct drive cylinders
- Oversized 53" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17" x 19" A36 steel base plate
- Self lubricating dura-glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3"
- Plated arm restraints and arm pins for rust prevention
- Heavy duty 1/2" aircraft quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4 piece 63 mm stackable adapter set comes standard
- Triple telescoping arm design
- Versatile drop in contact pads with stackable adapters
- ETL Approved
Specifications
| Lifting capacity* Max capacity / Front Axle: Max capacity / Rear Axle: |
10,000 lbs. / 4,536 kg 5,000 lbs. / 2,268 kg 5,000 lbs. / 2,268 kg |
| A - Overall Height | 145" / 3,683 mm |
| B - Width Overall (NARROW CONFIG) | 137" / 3,480mm |
| B - Width Overall (WIDE CONFIG) | 145" / 3,683 mm |
| C - Width Outside of Columns (NARROW) | 133" / 3,378 mm |
| C - Width Outside of Columns (WIDE) | 141" / 3,581 mm |
| D - Floor to Overhead Switch | 141" / 3,581 mm |
| E - Inside Columns (NARROW) | 104" / 2,642 mm |
| E - Inside columns (WIDE) | 112" / 2,845 mm |
| F - Front Arm Min Reach | 23-1/2" / 597 mm |
| G - Front Arm Max Reach | 45-1/2" / 1,156 mm |
| H - Rear Arm Min Reach | 42-1/2" / 1,079 mm |
| I - Rear Arm Max Reach | 60" / 1,524 mm |
| J - Min Pad Height | 4.25" - 6-3/4” / 108 - 171 mm |
| K - Rise | 69" / 1,753 mm |
| L - Lift Height Max (Pad Only) | 73" - 75" / 1,854 - 1,905 mm |
| M - Max Lift Height (3" Adapter) | 75.5" - 77.5" / 1,917 - 1,968 mm |
| N - Drive-thru clearance (NARROW) | 94" / 2388 mm |
| N - Drive-thru clearance (Wide) | 102" / 2591 mm |
| Time to Full Rise | 45 sec |
| Screw Pad Adjustment | 2" / 51 mm |
| Motor | 220 VAC / 60 Hz / 1 Ph |
| Max Load Per Arm | 2,500 lbs. / 1,134 kg |
Ranger R76ATR 30" Capacity Tilt-Back Tire Changer w/ Right-Tower Single Assist
The R76ATR is a brilliant time saver. Its tilt-back tower allows you to operate different tire-and-wheel combos without adjusting the duck head, and the swing-arm design with tower assist ensure stiff sidewalls are never a problem. RimGuard™ clamps extend 10" – 30" for maximum versatility.
Features
- 4 Clamps (Internal / External)
- Dual Pneumatic Cylinders
- Adjustable Pneumatic Blade
- Tilt-Back Tower Design
- Vertical Shaft / Tool Head Positioning
- Inflation System
- Inflation Gauge & Integrated Air Dump Valve
- Inflation Pressure Regulator/Limiter
- Water Filter
- Oiler / Lubricator
- Air Regulator
- Bead Tool/Tire Iron
- Alloy-Steel Mount-Demount Head
- Nylon Mount-Demount Head
- Large Soap Bucket
- Soap Brush
- TurboBlast™ Bead Seating System
- Tool Tray / Bin Storage
- Motorcycle Turntable Clamps (optional)
Specifications
| Style: | Tilt-Back Tower Design |
| Assist Type: | Single-Tower Assist |
| Speed: | Standard |
| Motor | 3 HP (220 VAC 50-60 HZ) |
| Drive System Type | Electric / Hydraulic |
| Air Requirement | 110-175 PSI (8-12 BAR) |
| Wheel Clamping Method | 4 Clamps - Internal / External |
| Table Clamping System | Dual Pneumatic Cylinders |
| Bead Breaking System | Adjustable Pneumatic Blade |
| Tower Design | Tilt-Back |
| Power Assist Tower(s) | Single / Right-Side |
| Bead Lifting Roller(s) | Single / Right-Side |
| Upper Bead Assist Roller | Single / Right-Side |
| Vertical Shaft / Tool Head | Pneumatic / Locking |
| Powerful Bead Seating System | TurboBlast™ |
| A - Inside (Wheel) Clamping Range | 8" - 26" (203 mm - 660 mm) |
| B - Outside (Wheel) Clamping Range | 10" - 30" (254 mm - 762 mm) |
| Maximum Rim Width | 15" (381 mm) |
| Maximum Tire Diameter | 43" (1,092 mm) |
| Shipping Weight | 920 lbs. (417 kg) |
| Shipping Dimensions | 50" x 50" x 68" (1,270 mm x 1,270 mm x 1,727 mm) |
| Recommended Footprint | 60" x 50" x 78" (1,524 mm x 1,270 mm x 1,981 mm) |
Ranger DST30P Six-Second Balancing Time Wheel Balancer
Ranger DST30P Wheel Balancer One-Spin, Minimal Weight Placement
The DST30P wheel balancer accurately and efficiently calibrates wheel and tire configurations. Like the DST2420 wheel balancer, the DST30P handles wheels up to a 30” diameter. It also contains many of the same working components as the DST-2420 but with one exception: we took the 64-tooth magnetic transducer encoder from the DST-64T and built it into this smaller unit for minimal yet incredibly precise wheel weight placements. The larger encoder features precision-cut square teeth to convert rotary position to a digital electronic signal, quickly achieving maximum profile and top-dead-center positioning
Features
- Dynamic, Static, and Performance Alloy settings
- A multi-user save function holds presets to increase productivity
- An ergonomic control board and easy-to-read LED display has vibrant visual cues and keypad to improve efficiency and proper balancing techniques for faster floor-to-floor times
- A simultaneous retrieval of static, dynamic and ALU1/ALU2 data, identifies weight placement configurations for a variety of wheel styles and designs with the simple push of a button
- Automatic rolling wheel parameter setting feature saves valuable time and minimizes errors
- Low RPM balancing speed and rapid six-second cycle time
- Automatic braking
- Gram/ounce selection and millimeter/inch selection
- Automatic round-off with top-dead-center weight position indicator
- Manual or automatic start when hood is lowered
- Self-calibration function
- High-volume top weight tray and side shelf storage gives you room to inventory a wide variety of wheel weights and tools
- Newly designed side shelf features an open-top design that accommodates Ranger Quick-Peel™ adhesive tape weight convenient bulk rolls
- Precision-machined, hardened-steel ?40 mm shaft
- Quick-release hub nut for dramatically reduced set-up times
- Side-position brake hold wheels at precisely 12-o’clock for proper weight placement
- Side cone storage pegs keeps accessories readily available
- New “open-side” hood design allows for a broader coverage of tire shapes and sizes
Specifications
| Style: | Auto & Light Truck |
| Data Entry: | Manual |
| Motor | 1.5 HP, 110/220V, 50 / 60 Hz, 1Ph |
| Working Temperature | -5°C / 27°F - 50°C / 82°F |
| Cycle Time | 6 - 9 Seconds (avg.) |
| Balancing Modes | Dynamic / Static / 3-Alloy |
| Drive System | Belt Drive |
| Wheel Braking | Automatic / Electronic |
| Cones Included | 3 Standard / 1 Truck |
| Max. Tire Diameter | 50” (1,270 mm) |
| Max. Tire Weight | 150 lbs. (68 kg) |
| Wheel Diameter Capacity | 8” - 30” (254 mm - 672 mm) |
| Wheel Width Capacity | 1.2” - 20” (30 mm - 508 mm) |
| Balancing Increments | 0.25 oz (7 gram) |
| Balancing Speed | 180 RPM |
| Accuracy | +/- 1 gram (.035 oz) |
| Resolution | 0.01 ounce, 1.4° |
| Shipping Weight | 370 lbs. (168 kg) |
| Shipping Dimensions | 44" x 30" x 46" (1,117 mm x 762 mm x 1,168 mm) |
Bendpak APX-TS1 Tire Shop Accessory Pack
Accessory Pack:
- (1) 5215761 Frame Cradle Pads / 60 mm Pin / SET OF 4
- (1) 5150555 Wheel Balancer Truck Cone / Spacer Kit Set / Fits 36 mm Shaft
- (1) 5150230 Adhesive Steel Wheel Weights / Combo / ROLLS (1400 pcs. - 0.25 oz. - 1/2" Wide - 22 lbs.)
Specs Sheets:
**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freigh at their location.
Branick 2230 3 Bar Inflation Cage
$435.00
$353.12
JMC Equipment Tc-Atsb-1 Adjustable Tire Spreader W/Base
$124.50
$103.75
Bendpak TSB-1 Tire Shop Bundle
$14,358.00
$11,965.00
Bendpak TSB-2 Tire Shop Bundle
$16,404.00
$13,670.00
