Challenger Lifts CL10-XP9-DPC 9000 Lbs Drive On Style Two Post Lifts W/ Dual Pendant Control

Challenger Lifts

SKU:
CL10-XP9-DPC
Condition:
New
Availability:
Factory Shipped
Shipping:
Free Shipping
Capacity:
9,000 Lbs
  • Challenger Lifts B10264A Air/Electric Workstation With Filter/Lubricator and regulator
  • Challenger Lifts B99700 Tire Tool Manager Work Station With Filter Lubricator / Regulator
Total Price:
MSRP: $20,910.47
$13,382.70
(You save  $7,527.77 )
Adding to cart… The item has been added

Challenger Lifts CL10-XP9-DPC 9000 Lbs Drive On Style Two Post Lifts W/ Dual Pendant Control

CL10XP9 Two Post Lift Series

Challenger’s 9,000 lb. capacity CL10XP9 2-post lift offers a drive-on pad for the quickest vehicle spotting designed for express bays. Accurate first-try spotting will boost your productivity as well as reduce frustration in your shop. Quick Cycle™ models improve lifting speed to just 27 seconds rise and 17 seconds lower. Also, adjustable height and width options are available, making the CL10-XP9 the best choice for any service professional. Expand your service potential with our most versatile, easy-to-operate lift.

Features

  • Dual Pendant Control
  • 9,000 lb. lift capacity
  • Drive-on style pad aids in quick vehicle spotting for express bays
  • Low-profile pad design minimizes vehicle clearance issues
  • Reinforced front and rear access ramps are designed to easily flip up and lock to extend the platform length to accommodate longer wheelbase vehicles
  • Standard column mounted spotting block storage caddy helps keep a safe and clean work environment
  • 48″ elongated carriage design increases lift life
  • Oversized 5″ diameter pulley and heavy duty 5/16″ cable reduces stress on equalization system and increases cable life
  • Padded overhead shut off system prevents vehicle damage
  • Fully gusseted base plate design increases column rigidity
  • Pulley-less jacketed single-point lock release system makes for smoother, easier operation and longer life
  • Premium powder coat finish provides long-lasting durability
  • Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage

Specific Features of CL10-XP9-DPC

 Model Number  CL10-XP9-DPC
 Lifting Capacity  9,000 lbs.
 Lifting Configuration  Drive-on express pad
 Rise Height  70”
 Overall Height  140”
 Overall Height (Cylinder Extended)  143”
 Overall Width  138.5”
 Drive-Thru Clearance  90”
 Floor to Overhead Switch  134.5”
 Platform Height  2.25“
 Platform Width  24”
 Platform Length  58” / 66.5” / 75”
 Width Between Platforms  31.5“
 Inside of Columns  110”
 Motor / Voltage  2HP, 208v-230v, 60Hz, 1Ph
 Speed of Rise  38 s
 Ceiling Height Required  12’
 ALI/ETL Certified  Yes
 Featuring Quick Cycle  -
 Featuring Dual Pendant Controls  Yes
 Colors Available  Red, Blue, Black

Additional Parts and Accessories

Productivity Accessories
 Part No.  Description
 B10264A  Air/electric workstation with filter/lubricator/regulator
 B99700  Tire Tool Manager Work Station with filter/lubricator/regulator
   
Power Upgrades
 Part No.  Description
 3PH217  Power Unit Upgrade to 3-Phase - 208V
 3PH239  Power Unit Upgrade to 3-Phase - 230V
 3PH469  Power Unit Upgrade to 3-Phase - 460V

Download

Brochure
Spec Sheet
Manual

Other Models

 Model Number  CL10-XP9  CL10-XP9-DPC  CL10-XP9-QC  CL10-XP9-DPC-QC
 Lifting Capacity  9,000 lbs.  9,000 lbs.  9,000 lbs.  9,000 lbs.
 Lifting Configuration  Drive-on express pad  Drive-on express pad  Drive-on express pad  Drive-on express pad
 Rise Height  70”  70”  70”  70”
 Overall Height  140”  140”  140”  140”
 Overall Height (Cylinder Extended)  143”  143”  143”  143”
 2’ Height Extension Available  Yes  Yes  Yes  Yes
 3’ Height Extension Available  Yes  Yes  Yes  Yes
 Overall Width  138.5”  138.5”  138.5”  138.5”
 Drive-Thru Clearance  90”  90”  90”  90”
 Floor to Overhead Switch  134.5”  134.5”  134.5”  134.5”
 Platform Height  2.25“  2.25“  2.25“  2.25“
 Platform Width  24”  24”  24”  24”
 Platform Length  58” / 66.5” / 75”  58” / 66.5” / 75”  58” / 66.5” / 75”  58” / 66.5” / 75”
 Width Between Platforms  31.5“  31.5“  31.5“  31.5“
 Inside of Columns  110”  110”  110”  110”
 Motor / Voltage  2HP, 208v-230v, 60Hz, 1Ph  2HP, 208v-230v, 60Hz, 1Ph  3HP, 208v-230v, 60Hz, 1Ph  3HP, 208v-230v, 60Hz, 1Ph
 Speed of Rise  38 s  38 s  27 s  27 s
 Ceiling Height Required  12’  12’  12’  12’
 ALI/ETL Certified  Yes  Yes  Yes  Yes
 Featuring Quick Cycle  -  -  Yes  Yes
 Featuring Dual Pendant Controls  -  Yes  -  Yes
 Colors Available  Red, Blue, Black  Red, Blue, Black  Red, Blue, Black  Red, Blue, Black

Challenger Lifts Warranty Agreement

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.

Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.

Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml

Description Model/Series Labor Functional Parts Structural parts Extended Warranty Available
CL10 CL10 1 Year 2 Years 5 Years Yes
10K 2-Post, 9K 2-Post LE10,  SA10,  CLFP9 1 Year 1 Year 5 Years No
12K, 15K, 18K 2-Post CL12, 15000, 18000 1 Year 2 Years 5 Years Yes
8K Inground EVW0820 1 Year 2 Years 2 years No
10K Ingrounds EV1020 1 Year 2 Years 5 Years Yes
12K, 15K Ingrounds EV1220, EV1520 1 Year 1 Year 5 Years Yes
14K 4-Post 4P14 1 Year 1 Year 5 Years No
15K 4-Post 4015 1 Year 2 Years 5 Years No
30K 4-Post Cable Drive 4030 1 Year 2 Years 5 Years No
30K, 40K, 60K Chain Drive 44030, 44040, 44060 1 Year 1 Year 1 Year No
Rolling Jacks RJ, SAJ 1 Year 1 Year 1 Year No
Mid and Short Rise MR-6, SRM-10 1 Year 1 Year 1 Year No
Scissors SX14, DX77 1 Year 1 Year 1 Year No
Mobiles CLHM 1 Year 1 Year 5 Years No
Accessories     90 days   No
Replacement Parts     90 days   No


Extended Warranty

An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.