Assenmacher Specialty Tools

Assenmacher  WSFLC Flash Light Clamp Specifications: Holds from .5" to 1.5" diameter Stout Construction Nylon Injection Molded Used in conjunction with our #WSC15 Soldering Clamp Tool. This can...

Assenmacher WSC15 Wire Soldiering Clamp Specifications: 7" Flex Cable Arm for Difficult to Reach Areas Spring Loaded Articulating Claws Clamp onto Wires Firmly Hold Wires Firmly in Place During...

Assenmacher VW 5220 Camshaft Adjuster Socket Specifications: #10 Polydrive 1/2" Drive .59" (15mm) Bit Length 2.09" (53mm) Overall Length Comparable to VW #T40080 Used for the camshaft adjuster bolt...

Assenmacher VW 87-1 Spanner Wrench Specifications: Comparable to VW Tool #3387 Used fort the adjustment of the timing belt on Audi/Vw with the 3.0L and 1.8l Turbo. Also wors on [1999-2002] VW Gold...

Assenmacher  VTC100 Volvo Truck Coolant Drain Hose Specifications:  Comparable to Volvo #9996049 Used to drain the coolant of Volvo D11, D12 and D13 diesel engines [2004-2019] and Mack...

Assenmacher  V 5720 Volvo Fuel Pump Wrench Specifications: 1/2" Drive Comparable to Volvo Tool #9995720 Applicable to Volvo: V70 (00-), 580, XC90, 560, V70 XC (01-) / XC70. Used on the...

Assenmacher TOY 647LG Oil Filer Wrench Specifications: 64mm 14 Flats 3/8" Drive Engages the notches on the V6 and V8 Filter Housings Applicable to [2005-2019] Toyota V6 and V8 engines with canister...

Assenmacher TOY 288 Toyota Front Hub Nut Socket Specifications: 3/4" Drive Comparable to Toyota Factory Tool # 09318-12010-8Pin and #09602-60010. Used to R and R of the front hub lock nut on...

Assenmacher TOY 105 Toyota Head Bolt Socket Specifications: #8 bi-hexagon 1/2" Drive 2.44" (62mm) Bit Length 3.94" (100mm) Overall Length Head bolt socket for newer Toyota Prius and Yaris that use a...

Assenmacher TOY 18B Toyota Brake Fluid Adapter Specifications: Requires use of an 1/4-18 NPT fitting (not included) Fits Most Toyota Vehicles Fits 42mm ID Reservoir Made of steel and...

Assenmacher TM1415 Ball Joint Hammer Nut Specifications: M14 x 1.5 22mm Hex Prevents damaging threads or ripping a boot Used for breaking free steering knuckle/suspension joints using an impact...

Assenmacher TM1215 Ball Joint Hammer Nut Specifications: M12 x 1.5 Threads 22mm Hex Prevents damaging threads or ripping a boot Used for breaking free steering knuckle/suspension joints using an...