Dent Fix Equipment DF-512 10 Finger HD Bear Claw Use the DF-512 for heavier wiggle wire pulls, power post pulls and pull wider areas. WARNING: California Prop 65

Dent Fix Equipment DF-DM55DE Ding Enhancer Shield Find imperfections in the surface instantly with the Ding Enhancer Shield (DF-DM55DE). Using the reflection of the shield in the car body, the dents are easier to hale and ready for a perfect PDR repair...

Dent Fix Equipment DF-MP050DT Punch Head - Deep Throat Deep throated punch head (DF-MP050DT) for DF-MP050K Pneumatic Hole Punch. Depth to center of 830mm hole: 1.5 inches. WARNING: California Prop 65

Dent Fix Equipment DF-DM510DBY Yellow Ding Board Great complement to any of the Dent Fix PDR sets. Used when hailing dents for PDR work. After positioning the tool so the varying lines are visible in the reflection of the dent you will be able to...

Dent Fix Equipment DF-DM510DBW White Ding Board Great complement to any of the Dent Fix PDR sets. Used when hailing dents for PDR work. After positioning the tool so the varying lines are visible in the reflection of the dent you will be able to...

Dent Fix Equipment DF-506 9 Finger Bear Claw Our nine-fingered claw, the DF-506, is designed for heavier panels and pulls that may require a slide hammer or power post. The pulling finger design allows for stronger pulls that may require a slide hammer...

Dent Fix Equipment DF-SPR/E1 Extractor Die E1 (MALE ONLY) Extractor Die MALE ONLY - E1 (DF-SPR/E1). Fits the DF-SPR67 Self-Piercing Riveter (Sold Separately). WARNING: California Prop 65

Dent Fix Equipment DF-504 4 Finger Bear Claw The DF-504 Four Finger Bear Claw is ideal for hand pulling creases across a door. Used in combination with wiggle wire that is welded to the panel, the unique finger design allows the deepest part of the panel...

Dent Fix Equipment DF-900PF Pull Finger The DF-900PF is an innovative pull finger that attaches to a welded pin for dent pulls on automotive aluminum panels. Simply slide the pull finger over the stud to engage. The slide finger will hold onto the stud...

Dent Fix Equipment DF-PG213 Perfect Gap Gauge - 2 pc Setting the perfect gap width when aligning body panels and hoods just got a lot easier thanks to the DF-PG213 Perfect Gap Gauge from Dent Fix Equipment. No longer does the technician need to eye the...

Dent Fix Equipment DF-DB79K Dead Blow Hammer Kit The DF-DB79K is a unique Dead Blow Hammer is an adaptive paint-less dent repair (PDR) tool that can be customized to get the job done. The dual head gives the user two striking ends to knock down high spot...

Dent Fix Equipment DF-900TP T-Puller - Aluspot Hand T-Puller (DF-900TP) for dent pulling. Solid construction and utmost in quality materials. After a stud is welded to the damaged area and a puller finger (DF-900PF, sold separate) is attached to the...