Bendpak TS-580V-601 5 Hp 80 Gallon Elite Air Compressor


Factory Shipped

Total Price:
$3,237.00 $2,525.00
(You save $712.00)
Free Shipping
Free Shipping

Factory Shipped

BendPak TS-580V-601 Elite Air Compressor

The TS-5 is one of BendPak’s most popular air compressor models. High-quality, slow running cast iron compressor pumps deliver proven longevity in the demanding conditions. Because they run at a slower RPM than most comparable units, they’re quieter, run cooler and cost less to operate. 100% cast iron pumps provide the quality and performance needed for heavy-use applications like automotive and body repair to manufacturing and industrial service.


  • Extra-quiet, low-RPM pump
  • 5 HP energy?efficient motor
  • Pressure switch ensures efficient operation at all times with no wasted energy
  • Cast?iron pump and heads are more stable under heavy workloads and do not warp from heat like aluminum cylinders with pressed?in sleeves
  • Cast?iron Elite pump features simple splash lubrication for total reliability and a finned cylinder configuration that provides 360° cooling
  • Dual drive belts require less belt tension resulting in less load on pump bearings, longer belt life and low vibration
  • Fully?enclosed belt guard
  • ASME-rated tank
  • Large surface area and cooling fins on cylinders and forced?air after-cooler provides efficient heat dissipation for lower operating temperatures and dryer air. Compressor runs cooler, oil life is extended and maintenance is reduced
  • Precision honed cylinders increase efficiency and oil control
  • Oversized ductile iron crankshaft provides extra strength and longer wear
  • Tapered roller main bearings provide full contact and support of the crankshaft and needle?type piston pin bearings properly distribute bearing loads
  • Precision balanced flywheel has forced?air fan blades for optimum compressor cooling and life
  • Magnetic starter provides thermal overload protection and minimizes start loads providing long life and trouble?free operation
  • ASME-rated safety valve protects the compressor from overpressure and safeguards the operator
  • Balanced flywheel and counterbalanced crankshaft provides vibration?free operation
  • Readily accessible disc?valves do not require disassembly of compressor piping for easy accessibility and reduced maintenance cost and downtime
  • Corrosion resistant tubing for coolers, separators and valves for longer life and reduced maintenance
  • High?density, die?cast aluminum alloy rods minimize reciprocating weight
  • Rugged cast iron oil reservoir has convenient sight gauge glass, large oil drain and convenient fill cap
  • Automatic pressure switch provides auto start and stop
  • Integrated pressure unloader valves are built into the intake valve assembly on the compressor head, reducing internal pump heat from initial start?up compression
  • Pressure gauge with service valve
  • Oversize replaceable air filter



  • Horsepower: 5 HP
  • RPM: 1,740 RPM
  • Voltage: 208 - 230V
  • Phase: 1 Ph
  • Hertz: 60 Hz
  • Running Amps (SFA): 26-23.8A
  • Peak Amps: 54-48A
  • Recommended Breaker: 30A
  • Noise: 75 dB


  • Style: 2-Stage / 2-Piston / Vertical
  • Lubrication: Splash / Oil
  • Material: 100% Cast Iron
  • Pump RPM: 625 RPM
  • Duty Cycle: Continuous
  • CFM @ 90 PSI: 17.9 CFM
  • CFM @ Max PSI: 17.2 CFM
  • Auto Turn-On Pressure: 145 psi
  • Auto Shut-Off Pressure: 175 psi
  • Max PSI: 175 psi


  • Orientation: Vertical
  • Size: 80 gallon
  • Outlet: 1/2" Fitting
  • Certification: ASME


  • Width: 39" (991 mm)
  • Depth: 79" (2,007 mm)
  • Height: 26" (660 mm)
  • Weight: 619 lbs. (281 kg)


  • Weight: 619 lbs. (281 kg)
  • Dimensions: 39" x 26" x 79" (991 mm x 660 mm x 2,006 mm)


**Bendpak charges taxes to California**

Bendpak charges sales tax in these states California, Washington, Alabama, Arizona, Colorado, Louisiana, North Carolina, and Ohio.

BendPak 2-Post Lifts and 4-Post Lifts are warranted for five years on equipment structure, to be free of defects in material and workmanship. Power units, hydraulic cylinders, and all other assembly components such as turnplates, slip plates, cables, chains, valves, switches etc. are warranted for one year against defects in material or workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

Bendpak 5-2-1 Warranty

Frequently Bought Together

Please choose options for all selected products