Bendpak HDS-27X 27,000-Lb. Capacity Extended Length 4 Post Car Lift

$19,345.00
$19,345.00
$16,185.00
(You save $3,160.00 )
Brand:
SKU:
5175164
Condition:
New
Availability:
Factory Shipped
Shipping:
Free Shipping
  • Bendpak DP-30 18 Gallon Rolling Drain Pan

BendPak HDS-27X 27,000-lb. Capacity Extended Length 4 Post Lift

  • Some vehicles at the 27,000-lb. lift capacity begin to develop monstrous proportions. Garage trucks, for instance, are wide, tall and feature wide wheelbases. You need a truck lift that can handle all those dimensions, plus the weight, without fail. The super-long HDS-27X may be the better option for your shop. Just be sure to discuss your service needs with a trained BendPak service representative if you need help deciding which 27K four-post lift is right for you.

Bendpak Leak Proof Bendpak HDS-27X Warranty Bendpak HDS-27X Floorplan

Bendpak Safe Balancing Bendpak Car Lift Guide Bendpak Top 10 Car Lift Buyer's Guide

Features:

  • 27,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Supersized 12" diameter cable sheaves
  • Galvanized lifting cables
  • Grease nipples
  • Single hydraulic under-runway cylinder
  • Integrated flow restrictor
  • Durable powder coat
  • Spring-loaded safety locks
  • Second lock system on constant guard
  • Fully enclosed lifting cables
  • Multiple adjustable height locking positions
  • Maintenance-free electric hydraulic power system
  • Conveniently positioned operator controls
  • 12" x 12" base plates
  • Non-skid runways
  • Optional rolling jacks

qr.jpg

Specifications:

Capacity

  • Lifting Capacity* 27,000 lbs. (12,247 kg)
  • *Max Capacity / Front Axle 13,500 lbs. (6,123 kg)
  • *Max Capacity / Rear Axle 13,500 lbs. (6,123 kg)

Rise

  • A - Min. Runway Height: 8.5" (216 mm)
  • B - Max. Rise: 60" (1,524 mm)
  • C - Max. Lifting Height: 68.5" (1,740 mm)
  • Time to Full Rise: 75 seconds 

Outside Dimensions

  • D - Overall Width: 154" (3,912 mm)
  • E - Outside Length: 317" (8,052 mm)
  • F - Overall Length: 357" (9,068 mm)
  • G - Height of Columns: 93" (2,362 mm)

Inside Dimensions

  • H - Width Between Columns: 134" (3,404 mm)
  • I - Drive-Thru Clearance: 109" (2,769 mm)

Runways

  • J - Runway Width: 22" (559 mm)
  • K - Length of Runways: 323" (8,204 mm)
  • L - Width Between Runways: 38" (965 mm) or 56" (1,422 mm)
  • M - Runway Centerline: 60" (1,524 mm) or 78" (1,981 mm)
  • N - Outside Edge of Runways: 82" (2,083 mm) or 100" (2,540 mm)

Minimum Wheelbase

  • Rated Capacity: 230" (5,842 mm)
  • 75% Capacity: 195" (4,953 mm)
  • 50% Capacity: 165" (4,191 mm)
  • 25% Capacity: 130" (3,302 mm) 

Locking

  • Locking Positions: 9
  • Lock Spacing: Every 6" (152 mm) 

Power Unit

  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Noise: 45 dB 

ACCESSORIES:

Bendpak WSA-100     Bendpak Air Bottle jack     Bendpak DP-30     Bendpak Rolling Jack 9000     Bendpak Airline Kit
          WSA-100                       AIR BOTTLE JACK                       DP-30                      ROLLING JACKS                  AIRLINE KIT 

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to function. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Shipping is FREE to direct points within the 48-contiguous states.

**Bendpak charges taxes to California**

**A 5% RATZ Surcharge may apply if shipping to a rural shipping point. Click here to check if you are in a RATZ zone

***It is the buyer's responsibility to unload the freight at their location.

****The Bendpak HDS-27 is an ALI Certified Lift. Click here to view its certification. 

BendPak 2-Post Lifts and 4-Post Lifts are warranted for five years on equipment structure, to be free of defects in material and workmanship. Power units, hydraulic cylinders, and all other assembly components such as turnplates, slip plates, cables, chains, valves, switches etc. are warranted for one year against defects in material or workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

Bendpak 5-2-1 Warranty