Bendpak HDS-14LSXE 14,000-Lb. Alignment Limo Extended Length Lift

SKU:
5175172
Condition:
New

Factory Shipped.

  • Bendpak RBJ7000 7,000 Lb. Capacity, Rolling Bridge Jack
  • Bendpak DP-30 18 Gallon Rolling Drain Pan
  • Bendpak Wsa-100 Optional Air-Electric Workstation / Fits 2-Post & 4-Post Lifts
Total Price:
$10,090.00 $8,440.00
(You save $1,650.00)
Free Shipping
Free Shipping

Factory Shipped.

Bendpak HDS-14LSXE 14,000-lb. Alignment Limo Extended Length Lift

The HDS-14LSXE alignment lift is designed for extendedlength vehicles, such as trucks and vans. The runways and overall length are extended by 30”. With runways now 229” in length, some very long vehicles can fit easily on this alignment lift. If your service bay demands these vehicle types, an extended length alignment lift from BendPak is absolutely necessary to perform long wheelbase alignments.

Bendpak Leak Proof Bendpak HDSO-14LSX Warranty Bendpak HDSO-14LSX Floorplan

Bendpak Safe Balancing Bendpak Car Lift Guide Bendpak Top 10 Car Lift Buyer's Guide

Features 

  • 14,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493.
  • Two runway lengths to choose
  • Heavy‐duty turn plates and integrated rear slip‐plates included
  • Multi‐position turn plate pockets
  • Automatic leveling system
  • Runways include rail‐kit for optional accessories
  • Electric/hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Internal “Anti-Sway” slider blocks in each column
  • Features oversize sheaves and heavy‐duty 1/2” aircraft cable
  • Rugged 1‐3/8” roller axles and oversize self‐lubricating cable sheaves
  • Multi‐position safety locks in each column with push‐button safety release
  • Runways adjust for different tread widths and feature non‐skid surface
  • Optional 7,000 pound capacity bridge jacks available (Model R​BJ7000)

hds.jpg

 Specifications

 Capacity

  • Lifting Capacity*: 14,000 lbs. (6,350 kg)
  • *Max Capacity / Front Axle: 7,000 lbs. (3,175 kg)
  • *Max Capacity / Rear Axle: 7,000 lbs. (3,175 kg)

 Rise

  • A - Min. Runway Height: 7.625" (194 mm)
  • B - Max. Rise: 70" (1,778 mm)
  • C - Max. Lifting Height: 77.625" (1,972 mm)
  • Time to Full Rise: 60 seconds

 Outside Dimensions

  • D - Overall Width: 130" (3,302 mm)
  • E - Outside Length: 243" (6,172 mm)
  • F - Overall Length: 271" (6,883 mm)
  • G - Height of Columns: 93" (2,362 mm)

 Inside Dimensions

  • H - Width Between Columns: 120" (3,048 mm)
  • I - Drive-Thru Clearance: 97" (2,464 mm)

 Runways

  • J - Runway Width: 20" (508 mm)
  • K - Length of Runways: 229" (5,817 mm)
  • L - Width Between Runways: 37.5" (953 mm) or 51" (1,295 mm)

 Alignment

  • M - Min. 4-Wheel Alignment: 89" (2,261 mm)
  • N - Max. 4-Wheel Alignment: 156" (3,962 mm)
  • O - Max. 2-Wheel Alignment: 212" (5,385 mm)

 Minimum Wheelbase

  • Rated Capacity: 165" (4,191 mm)
  • 75% Capacity: 140" (3,556 mm)
  • 50% Capacity: 115" (2,921 mm)
  • 25% Capacity: 95" (2,413 mm)

 Locking

  • Locking Positions: 13
  • Lock Spacing: 4

 Power Unit

  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Noise: 45 dB

 Shipping

  • Weight: 3,252 lbs. (1,475 kg)
  • Dimensions: 241" x 23" x 45" (6,121 mm x 584 mm x 1,143 mm)

 

accessories: 

WSA-100     DP-30 

      WSA-100                              DP-30
     (5210436)                          (5150509) 

**Bendpak charges taxes to California**

*Shipping is FREE to direct points within the 48-contiguous states.

 

**A 5% RATZ Surcharge may apply if shipping to a rural shipping point. Click here to check if you are in a RATZ zone

 

***It is the buyer's responsibility to unload the freight at their location.

 

****The Bendpak XPR-9 is an ALI Certified Lift. Click here to view its certification.

 

BendPak 2-Post Lifts and 4-Post Lifts are warranted for five years on equipment structure, to be free of defects in material and workmanship. Power units, hydraulic cylinders, and all other assembly components such as turnplates, slip plates, cables, chains, valves, switches etc. are warranted for one year against defects in material or workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

Bendpak 5-2-1 Warranty

Frequently Bought Together

Please choose options for all selected products

  • Choose Options
    • Bendpak RBJ7000 7,000 Lb. Capacity, Rolling Bridge Jack
    • Bendpak DP-30 18 Gallon Rolling Drain Pan
    • Bendpak Wsa-100 Optional Air-Electric Workstation / Fits 2-Post & 4-Post Lifts