Free Shipping

Bendpak HDS-14LSX 14,000-Lb. Capacity Extended Alignment Lift

$8,505.00
$7,115.00
$6,680.00
(You save $1,825.00 )
Brand:
SKU:
5175171
Condition:
New
Availability:
Factory Shipped
Shipping:
Free Shipping
  • Bendpak RBJ7000 7,000 Lb. Capacity, Rolling Bridge Jack
  • Bendpak DP-30 18 Gallon Rolling Drain Pan
  • Bendpak Wsa-100 Optional Air-Electric Workstation / Fits 2-Post & 4-Post Lifts

Bendpak HDS-14LSX 9,000-lb. Capacity Alignment Car Lift

The legendary, 14,000-lb. capacity HDS-14LSX alignment lift pulls double duty as both car lift and alignment system. We’ve integrated industrial-strength slip plates and turn plates right into the runways to maximize convenience. Even though the vehicle is completely secure, the wheels respond to your every adjustment with virtually no resistance. Imagine the raw lifting power of BendPak’s best combined with a free-floating, four-wheel alignment system. Your job just got easier. This model is available with optional drive-thru ramps, drip trays and rolling jacks.

Bendpak Leak Proof Bendpak HDS-14LSX Warranty Bendpak HDS-14LSX Floorplan

Bendpak Safe Balancing Bendpak Car Lift Guide Bendpak Top 10 Car Lift Buyer's Guide

Features:

  • 14,000 pound lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Two runway lengths to choose
  • Heavy‐duty turn plates and integrated rear slip‐plates included
  • Multi‐position turn plate pockets
  • Automatic leveling system
  • Multiple auto-leveling locking positions
  • Runways include rail‐kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks, and sheaves
  • Internal "Anti-Sway" slider blocks in each column
  • Features oversize sheaves and heavy‐duty 1/2” aircraft cable
  • Rugged 1‐3/8" roller axles and oversize self‐lubricating cable sheaves
  • Multi‐position safety locks in each column with push‐button safety release
  • Runways adjust for different tread widths and feature non‐skid surface
  • Optional 7,000 pound capacity bridge jacks available (Model RBJ7000)

hds3.jpg

 Specifications:

 Capacity

  • Lifting Capacity*: 14,000 lbs. (6,350 kg)
  • *Max Capacity / Front Axle: 7,000 lbs. (3,175 kg)
  • *Max Capacity / Rear Axle: 7,000 lbs. (3,175 kg)

Rise

  • A - Min. Runway Height: 7.625" (194 mm)
  • B - Max. Rise: 70" (1,778 mm)
  • C - Max. Lifting Height: 77.625" (1,972 mm)
  • Time to Full Rise: 60 seconds

Outside Dimensions

  • D - Overall Width: 130" (3,302 mm)
  • E - Outside Length: 213" (5,410 mm)
  • F - Overall Length: 241" (6,121 mm)
  • G - Height of Columns: 95" (2,413 mm) 

Inside Dimensions

  • H - Width Between Columns: 120" (3,048 mm)
  • I - Drive-Thru Clearance: 98" (2,489 mm) 

Runways

  • J - Runway Width: 20" (508 mm)
  • K - Length of Runways: 199" (5,055 mm)
  • L - Width Between Runways: 37.5" (953 mm) or 51" (1,295 mm)

Alignment

  • M - Min. 4-Wheel Alignment: 89" (2,261 mm)
  • N - Max. 4-Wheel Alignment: 156" (3,962 mm)
  • O - Max. 2-Wheel Alignment: 182" (4,623 mm)

 Minimum Wheelbase

  • Rated Capacity: 140" (3,556 mm)
  • 75% Capacity: 120" (3,048 mm)
  • 50% Capacity: 100" (2,540 mm)
  • 25% Capacity: 80" (2,032 mm)

 Locking

  • Locking Positions: 13
  • Lock Spacing: 4"

 Power Unit

  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Noise: 45 dB

 Shipping

  • Weight: 3,102 lbs. (1,407 kg)
  • Dimensions: 209" x 22" x 44" (5,309 mm x 559 mm x 1,118 mm)

 

ACCESSORIES

 
Bendpak WSA-100     Bendpak Air Bottle jack     Bendpak DP-30     Bendpak Rolling Jack 7000     Bendpak Airline Kit
          WSA-100                       AIR BOTTLE JACK                       DP-30                      ROLLING JACKS                  AIRLINE KIT

 

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to function. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Shipping is FREE to direct points within the 48-contiguous states.

**Bendpak charges taxes to California**

**A 5% RATZ Surcharge may apply if shipping to a rural shipping point. Click here to check if you are in a RATZ zone

***It is the buyer's responsibility to unload the freight at their location.

****The Bendpak HDS-14LSX is an ALI Certified Lift. Click here to view its certification. 

BendPak 2-Post Lifts and 4-Post Lifts are warranted for five years on equipment structure, to be free of defects in material and workmanship. Power units, hydraulic cylinders, and all other assembly components such as turnplates, slip plates, cables, chains, valves, switches etc. are warranted for one year against defects in material or workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

Bendpak 5-2-1 Warranty