Bendpak E1.2B3F1 AC Electric/Hydraulic Power Unit

Bendpak E1.2B3F1 AC Electric/Hydraulic Power Unit

This hydraulic power unit exists solely to get your vehicle lifted fast. The rugged 2.5 HP motor accompanies an increased 3.6-gallon tank, all of which provide an extra boost of power. Low-rise car lifts will zip up to their max extension at incredible speeds; likewise, this unit is made to handle full-size two-post and four-post lifts without breaking a sweat. As always, Ranger Products assures the highest quality of construction and most advanced safety features.

Features:

• Pumps feature high mechanical and volumetric efficiency, low noise level
• End head prepared for lift-hold-lower applications using our standard manual lowering valve or solenoid cartridge valves
• Totally enclosed motors are suitable for use in humid environments or dusty, contaminated atmospheres. UL Recognized and CSA Certified* AC electric motors feature heavy gauge steel frame and base and high-quality ball bearings
• Torque load remains constant throughout the range of operation
• Power up, gravity down function
• Heavy-duty start switches with a high IP-protection class and silver-plated contacts meet tough demands for a long service life
• Cartridge-style relief valves meet tough demands for dependability and life expectancy
• Equipped with black plastic and steel reservoirs
• Vertical mounting
• Equipped with oil level dipstick
• High performance cartridge check valve is standard
• Most premium grade petroleum-based fluids can be used. Optimum operating viscosity range is 15 - 68 cSt
• Minimum recommended temperature is -25ºC (-13ºF)
• Maximum recommended temperature is +80ºC (+175ºF)
• 12-months warranty

Specifications:

• Motor: 208-230V AC, 3450 RPM, 1 PH, 60 Hz.
• HP: 2.5
• Pump: 2.1 CC/Rev.
• Relief: 2650 PSI (183 Bar) Fixed
• Pressure Port: 9/16-18 SAE
• Return Port Detail: 3/8 NPT
• Tank: 3.6 U.S. Gallon Vertical Tank/ Black Plastic
• Release valve: cartridge-style / Handle
• Check Valve: Cartridge-Style