Baileigh SBR-3020 3 in 1 Combination machine
Slip roll on top. Press brake in the middle. Shear on the bottom. This 3-in-1 combo machine saves space. The Baileigh SBR-3020 Shear Brake Roll is a great choice for small shops with low production runs and one-off projects. Adjust the camber of the tooling to keep pressure in the middle for a consistent bend across the full width. On the shear portion, a spring-loaded hold-down helps reduce burr on the cut and prevent waste. Hardened and reversible blades stay sharp for longer. Turn the handles 360° to get one full cycle from the slip roll, press brake, or shear.
*Recommended for: Hobbyists, maintenance, and R&D shops.
Looking for a wider shear brake roll? This machine is also available in a 40"-wide version.
Features
- 30" working width for manual shear, press brake, and roll.
- Maximum capacity of 20-gauge mild steel and 16-gauge aluminum for all functions.
- Slip roll features three wire grooves.
- Forms rolls down to 1.54" in diameter.
- Vertical press brake portion bends up to 90°, so you can make perfect corners.
- Press brake portion includes a V die set with corresponding punch die on top to make a 90° bend.
- Movable fingers on the top beam, ranging from 1" to 10-1/8", can make many box sizes.
- Large handles with grips on both sides allow two operators to combine their force and make the machine easier to use.
- Manual back gauge lets you make repeatable parts without difficulty.
- Thick steel construction, weighing 340 lbs., gives the machine structural strength and maintains accuracy.
Specifications
| Model Number | SBR-3020 |
| Rolling Capacity (Gauge) | 20 ga. (.036”) |
| Shear Capacity (Gauge) | 20 ga. (.036”) |
| Weight (Lbs.) | 340 |
*Specifications subject to change without notice.
WARNING: Cancer and Reproductive Harm
*Baileigh collects Sales Tax on all orders shipped to California and Wisconsin
Warranty Information
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791
