Baileigh AS-350M Abrasive Chop
*Images for reference only.
This industrial chop saw lets you cut thin wall tubing cleanly. We applied years of knowledge gained from engineering industrial cold saws to create the reliable, long-lasting AS-350M.
Features
- Powerful 7.5 hp motor can slice through thin wall tubing
- Maximum capacity of 4.5” round at 90° and 4” round at 45°
- Features 14” abrasive cutoff saw blade
- Requires 220-volt 3-phase power
- Blade reaches up to 4,300 RPM seconds after you turn it on
- Saw head can miter 45° left or right
- Cuts square tubing and pipe, bar stock, and angle iron, among other materials
- 6.5” maximum-width vise with a taper lock allows for fast material changes
- Cast base and head, mounted on a sturdy steel cabinet, reduce vibration, and increase blade life
Specifications
| Blade Speed (RPM) | 4300 rpm |
| Maximum Vise Opening (In.) | 6.5" |
| Model Number | AS-350M |
| Motor (HP) | 7.5 hp |
| Solid Rectangle at 90 Degrees (In.) | 5.5" x 3.5" |
| Style (Type) | Belt Drive |
*Specifications subject to change without notice.
*Baileigh collects Sales Tax on all orders shipped to California and Wisconsin
Warranty Information
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791
