Baileigh DP-15VSF 110/220V Single Phase (Prewired 110) 15" Variable Speed Floor Drill Press, Inverter Driven
*Images for reference only.
The DP-15VSF is the ultimate Woodworking Drill Press. This belt driven variable speed drill press has a true 1 HP motor that runs off of 110 volts, but can be wired to run on 220 volt single phase should the need arise. The availability of variable speed lets the MT2 spindle on the DP-15VSF turn at any speed from 400 to 5000 rpm, perfect for the wood worker. A digital readout helps determine the operating speed. a 6” spindle stroke.
Features
- 110/220V Single Phase (Prewired 110)
- Built to last the DP-15VSF belt driven variable speed drill press has a large 3” diameter column that allows for 15 inches of swing
- For those larger projects it has a 14” x 18” table with 5/8” t-slots
- The table also incorporates a rack and pinion system for moving the table up and down
- A halogen work light and drill chuck round out this great variable speed drill press package
Specifications
| Drilling Capacity | 0.625 (In.) |
| Model Number | DP-15VSF |
| Shipping Dimensions | 60x44x77 (L x W x H) (In.) |
| Table Width | 18" (In.) |
| Weight | 300 (Lbs.) |
*Specifications subject to change without notice.
Downloads
*Baileigh collects Sales Tax on all orders shipped to California and Wisconsin
Warranty Information
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791
