Bendpak 4-Post Lift Package Deal with 3D Aligner and Rolling Jack


Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Free Shipping
  • Bendpak WSA-100 Optional Air-Electric Workstation, Fits 2-Post & 4-Post Lifts
  • Bendpak JP-6 6,000 Lbs Sliding Jack Platform For Runway
  • Bendpak Airline Kit For HD-9/HD-14
  • Ranger RD-9G 9-Gallon Upright Portable Oil Drain
Total Price:
MSRP: $37,500.00
(You save  $6,250.00 )
Adding to cart… The item has been added

jmc-shipping-button.pngBendpak 4-Post Lift Package Deal with 3D Aligner and Rolling Jack

This package deal includes: Package Deal: (1) HD-14LSXE + (1) 3DP4100R + (2) RJW7


Bendpak HDS-14LSXE 14,000-lb. Alignment Limo Extended Length Lift

HDS-14LSXE 14,000-lb. Capacity / Alignment Lift / Limo Extended / Includes Turnplates and Slip Plates (5175172)

The HDS-14LSXE alignment lift is designed for extended length vehicles, such as trucks and vans. The runways and overall length are extended by 30”. With runways now 229” in length, some very long vehicles can fit easily on this alignment lift. If your service bay demands these vehicle types, an extended length alignment lift from BendPak is absolutely necessary to perform long wheelbase alignments.

Bendpak HDS-14LSXE 14,000-lb. Alignment Limo Extended Length Lift


  • 14,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493.
  • Two runway lengths to choose
  • Heavy-duty turn plates and integrated rear slip-plates included
  • Multi-position turn plate pockets
  • Automatic leveling system
  • Runways include rail-kit for optional accessories
  • Electric/hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Internal “Anti-Sway” slider blocks in each column
  • Features oversize sheaves and heavy-duty 1/2” aircraft cable
  • Rugged 1?3/8” roller axles and oversize self-lubricating cable sheaves
  • Multi-position safety locks in each column with push-button safety release
  • Runways adjust for different tread widths and feature non-skid surface


 Lifting Capacity*  14.000 lbs. (6350 kg)
 *Max Capacity / Front Axle  7000 lbs. (3175 kg)
 *Max Capacity / Rear Axle  7000 lbs. (3175 kg)
 A - Min. Runway Height:  7,625" (194 mm)
 B - Max. Rise:  70" (1778 mm)
 C - Max. Lifting Height:  77,625" (1972 mm)
 Time to Full Rise:  60 seconds
 Outside Dimensions  
 D - Overall Width:  130" (3302 mm)
 E - Outside Length:  243" (6172 mm)
 F - Overall Length:  271" (6883 mm)
 G - Height of Columns:  93" (2362 mm)
 Inside Dimensions  
 H - Width Between Columns:  120" (3048 mm)
 I - Drive-Thru Clearance:  98" (2489 mm)
 J - Runway Width:  20" (508 mm)
 K - Length of Runways:  229" (5817 mm)
 L - Width Between Runways:  37,5" (953 mm) or 51" (1295 mm)
 M - Min. 4-Wheel Alignment:  89" (2261 mm)
 N - Max. 4-Wheel Alignment:  156" (3962 mm)
 O - Max. 2-Wheel Alignment:  212" (5385 mm)
 Minimum Wheelbase  
 Rated Capacity:  165" (4191 mm)
 75% Capacity:  140" (3556 mm)
 50% Capacity:  115" (2921 mm)
 25% Capacity:  95" (2413 mm)
 Locking Positions:  13
 Lock Spacing:  4
 Power Unit  
 Motor:  220 VAC / 60 Hz / 1 Ph
 Noise:  45 dB
 Weight:  3,068-lbs. (1,440 kg)
 Dimensions:  207" x 22" x 44" (5,283 mm x 558 mm x 1,117 mm)

 Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.


Ranger 3DP4100R Target 3D Pro Imaging Aligner - INCLUDES SET-UP & TRAINING:

3DP4100R Target 3D Pro Imaging Aligner (Complete) INCLUDES SET-UP & TRAINING (5140101)

The Target 3DPro wheel aligner increases productivity by allowing technicians to do more wheel alignments in less time compared to conventional systems. This wheel aligner is perfect for wheel service repair shops handling a high volume of wheel alignments, especially those who would like to see a dramatic increase in profitability. With minimal investment and reduced training, the Ranger Target 3DPro aligner expands your service potential and sends more profit to your bottom line. The ProSpec® feedback that assists technicians in diagnosing problems will help increase your customer satisfaction and improve shop efficiency. The Target 3DPro uses advanced imaging technology that delivers fast and accurate alignments.

The advanced 3DPro Imaging Wheel Aligner System with ProSpec offers:

  • Deep Freeze Reboot-to-Restore Technology
  • Increase in bottom-line revenue
  • 30% average increase in read-rate accuracy
  • Fewer costly re-reads and investigations
  • Decline in come-backs and customer complaints
  • Specially designed for ease-of-use, speed and helpful technician feedback
  • Choose from three individual alignment procedures
  • Comes standard with start-to-finish computer-guided program
  • Quick readings without caster steering angle and/or run-out compensation

Free range measuring for checking individual readings as required screen displays include:

  • Front and rear camber (-15º to +15º)
  • Front and rear toe (also "super toe”—toe out on turns)
  • Front caster (-28º to +28º)
  • Individual caster, camber and toe
  • Front and rear setback, SAI and thrust angle, included angle
  • Elevated 3 Point or rolling run-out compensation
  • Elevated adjustments
  • Individual zoom readings allows operators to clearly see screen and software function from any wheel position
  • Customer database with customer notes and comments
  • Before and after adjustment readings
  • Visual vehicle adjustment help
  • ProSpec software is available in multiple languages. Check for current language availability.
  • Optional yearly specification and software updates are available on PC network or by simply installing a new program cartridge.
  • Help Menu


Bendpak RJ7W 7,000 Lb. Capacity, Rolling Bridge Jack

RJ7W 7,000-lb. Capacity / Rolling Bridge Jack (5175249)

BendPak’s 7,000-lb. capacity rolling bridge jack is made for an HD-14 four-post lift. Each rolling jack comes complete with three safety-lock positions and stackable pad adapters to provide added clearance when needed.

 RBJ7000 Rolling Jack


  • 7,000-lb. lifting capacity
  • Easy-Roll Wheels
  • Rubber contact pads
  • Stackable adapters
  • High-pressure hydraulic power unit
  • Optional air-line kit


 Lifting Capacity  7,000 lbs. (3,175 kg)
 Suitable Lift Model(s)  HDS-14 Series, HDSO14P, HD-14 Series
 Min. Drive-Over Height*  
 Pad Only:  4" (102 mm)
 Pad + 2.75" Adapter:  6.75" (171 mm)
 Pad + 5.5" Adapter:  9.5" (241 mm)
 Max. Lifting Height*  
 Pad Only:  14.75" (375 mm)
 Pad + 2.75" Adapter:  17.5" (445 mm)
 Pad + 5.5" Adapter:  20.25" (514 mm)
 Support Base Width:  36.25" (921 mm) - 46.5" (1,181 mm)
 Max. Arm Reach:  56" (1,422 mm)
 Min. Arm Reach:  42" (1,067 mm)
 Time to Full Rise:  55 seconds
 Pump:  Air/Hydraulic
 Air Pressure:  125 PSI (10-25 CFM)
 Max. Operating Hydraulic Pressure:  4,550 PSI
 Power Requirement:  None
 Shipping Weight:  440 lbs. (200 kg)
 Shipping Dimensions:  42" x 25" x 15" (1,066 mm x 635 mm x 381 mm)

* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.


**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.