Accudraft PREP3000 Automotive Prep Station & Limited Finishing Station
The Accudraft 3000™ is an automotive prep station and work area made for vehicle and parts preparation and painting with the addition of a dedicated intake fan. The 3000™ prep station is EPA 6H (NESHAP Subpart HHHHHH) rule compliant and is designed with a closed plenum that is hung from the shop ceiling and the work/spray area is enclosed with up to three curtain walls. The 3000™ comes as a modular one-bay prep station and can be expanded into unlimited work bays.
Product Photo (above): Accudraft 3000™ downdraft automotive prep station
Oblique Draft, Solid Back
The Accudraft 3000 prep or limited finishing station in oblique draft, solid back configuration delivers air in a front to back semi downdraft pattern. Air is delivered to the work space through the ceiling and air is exhausted out the rear of the workspace through a filtered back wall. Ideal for prep station installations where floorspace length is available and width is a concern. Operation is 100% air recirculation/100% exhausted to exterior via switch. No concrete pits or excavation necessary.
Oblique Draft, Drive Through
The Accudraft 3000 prep or limited finishing station in oblique draft, drive-through configuration delivers air in a left to right or right to left semi downdraft pattern. Air is delivered to the work space through the ceiling and air is exhausted out the workspace through a filtered side wall. Floor plan and shop flow are optimized by allowing the car to be prepped and/or painted and then driven through to the next step.Operation is 100% air recirculation/100% exhausted to exterior via switch.No concrete pits or excavation necessary.
The Prep 3000 prep or limited finishing station in a downdraft configuration delivers air through the ceiling and air is exhausted through the floor underneath the vehicle and user. Operation is 100% air recirculation/100% exhausted to exterior via switch.
Double Plenum 3000
The Prep 3000 prep or limited finishing station is available in any configuration as a double-plenum model. Two workstations with one large exhaust turbine unit. Double bays can be arranged in “U” or “T” configurations. Operation is 100% air recirculation/100% exhausted to exterior via switch.
KD 500R Non-Loading Backward Inclined Turbine Exhaust System
The KD™ 500R non-loading exhaust system is built for high powered exhaust pressure capable of handling clogged filters and heavy loads of dust and debris that are common in vehicle pre and sanding areas. Specially engineered turbines create draft in some of the toughest conditions while keeping the turbine wheel from loading up with dust and overspray prolonging longevity an performance of the system between maintenance cycles.
Timeless Direct Drive
Also available in direct drive. Equal performance, less to maintain. User choice. Does not affect price. What’s the difference?
Prep Station Control Panel
The Accudraft 4000 prep station control panel lets the user turn on lights to work without having the airflow turned on if desired. The motor and turbine are turned on independently and recirculate 100% of the air being moved. This provides the worker great airflow in the workspace without emptying the shop’s conditioned air by exhausting it outdoors. When heat or air conditioning is present in the shop, this can save a lot by not impacting the shop’s utility costs. Only with the use of a manual or optional automatic switch will the prep station dump air to the outdoors.
IRT Handheld Infrared Dryer
The IRT handheld dryer is a great addition to any finishing system. Dry spot jobs and hard-to-reach places in a snap.
IRT Hyperion Rail Mounted Short Wave Infrared Drying System
Reach just about anywhere on any job. High, low, side panel, top panel. It’s all the same to the IRT Hyperion rail system. Simply slide the adjustable arm anywhere you need it along the length of the booth or prep area and position the arm at the best angle to dry your job. The Hyperion will take it from there.
All Accudraft prep station specifications shown are for standard starting sizes and features. Many can be modified depending on layout and performance requirements. Any Accudraft automotive prep station is also available as a limited finishing station.