Omer Lifts: 10000 pound 2 post car lift

Omer Lifts

SKU:
Red 10
Condition:
New
Availability:
Please contact us at 800-562-4791 for shipping quote
Shipping:
Calculated at Checkout
Total Price:
MSRP: $5,999.00
$4,900.00
(You save  $1,099.00 )
Adding to cart… The item has been added
Shipping Calculated at Checkout Factory Shipped

Omer Lifts RED-10 10000 pound 2 Post car Lift - ALI Certified (GREY)

Automotive and light truck general service designed and built in Italy, and used by the world’s premium car manufacturers direct-drive dual metric overhead commercial grade 2 post car lift, enter and take your 10000 pound 2 post car lift and enjoy the best 2 post car lift

Specifications

 Capacity  10,000 LB. / 4.5T
 Max Rise from the ground  72.75" / 1848mm
 Lowest Clearance from the ground  4.05" / 103mm
 Narrow Drive-Thru Clearance  88.15" / 2239mm
 Narrow Overall Width  140.43" / 3567mm
 Narrow Width Inside of Columns  111.42" / 2830mm
 Wide Drive-Thru Clearance  99.96" / 2539mm
 Medium Width Inside of Columns  117.32" / 2980mm
 Wide Width Inside of Columns  123.23" / 3130mm
 Front Arm Reach  19.3" - 41.85" / 492mm - 1063mm
 Rear Arm Reach  37.3" - 60.20" / 948mm - 1529mm
 Standard Overall Height  143.7" / 3650mm
 Tall Overall Optional Height - not included  166" / 4235mm
 Tall Ceiling Height Requirements - not included  168" / 4267mm
 Width Arms Open Symmetric Setting  122.09" / 3101mm
 Width Arms Asymmetric Setting   34.45" / 875mm

-

Features

  • OMER two post lifts are powered by twin direct-drive cylinders, one in each column to drive the carriages and lift vehicles. OMER’s Direct-Drive two post car lift technology eliminates the need for lifting chains or screw mechanisms most commonly found on other lift designs. Dual HVLP low-pressure cylinders minimize leakage and offer better reliability, smoother operation and fewer maintenance costs. High Volume and Low Pressure equates to less workload placed on the entire hydraulic system. Direct-Drive technology is preferred, as it has fewer moving parts.
  • Dual Metric design provides both space-saving asymmetric lift capabilities for maximum drive-thru clearance with minimal footprint.
  • 3-stage front arms provide greater overall arm sweep and greater lifting flexibility.
  • Front arms articulate a full 180 degrees, providing maximum extension and retraction ensuring safe and reliable lifting.
  • Dual Metric design provides both space-saving asymmetric lift capabilities for maximum drive-thru clearance with minimal footprint.
  • Triple telescoping arm design allows for fast and easy spotting of vehicle, with superior vehicle protection.
  • Low profile arms provide greater clearance for vehicle panels and low ground effects.
  • Automatic arm restraints allow to easily position arms while lift arms are lower to the ground.
  • Single point lock release system safely allows for disengagement of both columns simultaneously.
  • Automatic engaging carriage locks prevents unintentional lowering of carriages, which could result in injury.
  • Oversized 57” tall lifting carriages offers superior strength and capacity.
  • Chrome plated cylinder rods and pistons inhibit rust and provide long-lasting durability.
  • Steel aircraft quality equalizing cable censure the swing arms are level and the vehicle is lifted evenly.
  • Space-saving lift design for minimal and maximum footprint for drive-thru clearance.
  • Adapters designed to facilitate lifting of larger and wider truck frames are included.
  • ALI Certified.

Optional Accessories

  • 24” Height Extender Kit

Download:

Specs Sheet

User Manual

Limited Warranty

OMER USA, Inc. lifts are guaranteed to the original owner. OMER USA shall repair or replace, at OMER’s discretion, for the full warranty period, those parts that prove upon inspection to be defective, and pay for reasonable costs of transportation for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used, and maintained according to OMER’s specifications set for in OMER’s Installation, Operation and Maintenance Manuals. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable.

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been made by anyone other than a service technician that has been approved in writing by the OMER Service Department.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer, or other person or entity is authorized to give any warranties of any nature on behalf of OMER USA, Inc.

The remedies described are exclusive and in no event shall OMER USA, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty.

General Warranty Policy for all OMER USA Products:

  1. 1.       Parts:    24 Months

General Warranty Terms and Conditions:

  1. 1.       Warranty will commence from the date of the initial invoice.
  2. 2.       OMER USA, Inc. will cover the most cost-effective shipping option for warranty items. If a customer shall request that a part be shipped by a more expeditious method, the difference in cost shall be covered by said customer.
  3. 3.       Warranty does not apply in cases where equipment has been damaged due to improper storage, improper use, uneven loading, accident (including transportation), modifications, or any other causes which are not the result of defective materials or workmanship. Please refer to the product manuals (and ALI documentation where it applies) included in the scope of delivery with every product.
  4. 4.       Warranty claims MUST be submitted via email or fax, and must include a detailed description of the issue that initially incited the claim, in addition to photographic evidence of the part in question.
  5. 5.       All warranty service work requires written approval by an authorized OMER USA, Inc. representative (Service Manager, Sales Manager, or General Manager) prior to starting any work, travel, etc. Without prior approval, any warranty work expenses will be declined. compensation.
  6. 6.       A completed “Service Itinerary Report” with customer signature needs to be submitted to OMER USA with each Service Expense Report within five (5) working days after completing the work. Failure to comply with these policies may result in non-reimbursement for such work.

Rates and Conditions for Reimbursable Warranty Service Work

  1. 1.       Cost of initial service call:                                            $95.00

Note:    Initial service call includes the first one hour of on-site service and up to 50 miles of travel.

  1. 2.       Additional hourly rate on site:                   $75.00
  2. 3.       Hourly rate for travel only:                                         $50.00
  3. 4.       Per mile reimbursement over 50 miles: $0.60/mile
  4. 5.       Other Expenses:

Any additional service expenses incurred for travel other than those noted above require prior approval and will be arranged by OMER USA. This includes, but is not limited to airline ticks, hotel rooms, and rental car usage.

Videos Hide Videos Show Videos