Titan Lifts MLJ-1000B 1,000 Lb Motorcycle Mini Jack
The Titan 1,000 lb motorcycle mini jack is perfect for lifting either end of your motorcycle or ATV for wheel service. Comes standard equipped with a removable steel crank handle, two adjustable saddle adapters, two height-adjustable rubber coated frame pads and a steel safety bar with six locking positions. Use the jack without the saddle adapters to get the lowest clearance possible at 3.5" fully collapsed. With a maximum raised height of 19" and a weight capacity of 1,000 lb, the Titan MLJ-1000B will be useful in more ways than you ever thought possible. Backed by a 90 day parts warranty through Titan Lifts based in Greenwood, Indiana.
Includes
- Steel safety bar (Important safety feature not found on similar models from other manufacturers)
- Two adjustable saddle adapters & two rubber coated pads
- Removable Steel crank handle (NOT RATED FOR AIR TOOLS)
- Can be used on garage floor or in conjunction with a motorcycle lift table
- Height: 3.5" - 16" Without saddles or 5.5" - 19" With saddles
Downloads
ManualTitan Standard Duty and Heavy Duty motorcycle lifts are backed by a standard 1 year replacement parts warranty from the date of purchase, to the original purchaser only. The 1 year replacement parts warranty covers power units, hydraulic cylinders, pneumatic cylinders, and all other assembly components such as, but not limited to: cables, caster wheels, valves, switches, wheel vises etc. This does not cover normal wear items such as but not limited to rubber wheel vise pads.
Titan Bulldog Moto Cradle Wheel Chock is warrantied for replacement parts, only to the original purchaser, for a period of 2 years from the date of purchase.
Titan shop equipment products and accessories are warrantied for replacement parts only to the original purchaser for a period of 90 days from the date of purchase. This 90 day replacement parts warranty covers products such as but not limited to: EZ mover jacks, Mini Jacks, tie down products, shop and Bulldog Moto Cradle Wheel Chock accessories, dollies, stands, Light Duty Motorcycle Lifts, etc.
For all warranty considerations, Titan Marketing, LLC will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. All defective parts must be returned to Titan for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Titan Marketing, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A TITAN MARKETING LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
