30" Offset kit for A2030
• The turntable installed uses a patented system allowing the working range
to be changed from 10” - 22” to 14” - 26” by a simple operator procedure (2
turntables in 1). Its new shape is designed to assure users working on large
diameter wheels easier and quicker wheel positioning during bead breaking.
Turntable 675 mm above the ground.
• The bead breaker installed is equipped with two special functions: the fixed
arm shoe can be lengthened, ideal for large-size and SUV wheels, and the shoe
support arm position can be adjusted. This adjustment function means that
the bead breaker arm is always at the right working angle to the wheel, making
it more effective, easier, quicker and above all safer in terms of avoiding tyre
and rim damage.
• Dual-position telescopic rim support (CORGHI patent) is extremely useful for
breaking the beads of all types of wheel up to a maximum width of 14”.
• Sliding supports with interchangeable clamping zones. Taller cast clamps for
better rim clamping from inside and outside.
• Simultaneous pneumatic locking of horizontal and vertical head arms,
with automatic head positioning in the ideal working position.
- Inner clamping capacity 13 - 26 Inch
- Outer clamping capacity 10 - 26 Inch
- Maximum tyre diameter 1100 mm (43”)
- Maximum tyre width 360 mm (14”)
- DV version rotation torque 1300 Nm
- DV version rotation speed 6 - 15 rpm
- Height above the ground 675 mm
- Bead breaker opening 380 mm
- Tool working range 8 - 26 Inch
- Power 230 V - 0.75 kw
- Operating pressure 10 bar
- Weight 259 kg
- Power supply 230v/1ph/50hz & 400v/3ph/50hz 0,75kW/200-230v/1ph/DV
This warranty does not cover any damage resulting from abuse or failure to perform any necessary maintenance (i.e. damage due to or resulting from, faulty installation, neglect, misuse, improper electrical connections or electrical surges, problems resulting from excessive water, contaminated air system, or pollutant of any nature, fire or freight damage)