Challenger Lifts DX77 7,700 Lbs. Double Scissor Vehicle Lift (Surface)
Overall Features of DX77 Double Scissor Series
Challenger engineered our 7,700 lb. capacity scissor lift with efficiency and productivity in mind. Our DX77 can easily lift all makes and models (within rated capacity) with a synchronized hydraulic system. The DX77 also offers free access all around the lifted vehicle and between platforms, with a cross-member free design providing an uncluttered and hazard-free work area. Choose to mount the DX77 either above ground or flush.
Features
- 7,700 lb. lifting capacity
- 74.5” rise height (70″ if flush mounted)
- Reinforced diamond-plate front and rear access ramps are designed to easily flip up and lock to extend the platform load length, which will accommodate longer wheelbase vehicles
- Double scissor lifting for taller rise allows more overall working clearance
- Single point air actuated lock release allows ergonomic working height for technicians to increase productivity and minimize fatigue
- Power unit console includes three simple push button controls
- 3” rubber spotting blocks (set of 4) and 1.5” rubber spotting blocks (set of 4) included
- Extended ramp kit available for low profile vehicles
- Powder coat finish provides long-lasting durability
- Can be mounted above ground or flush
Specifications
| Model Number | DX77 |
|---|---|
| Width Between Platforms | 21 - 27” |
| Voltage | 208/220v |
| Rise Time | 43 s |
| Rise Height | 74.5” |
| Ramp Length | 11.75” |
| Platform Width | 24.5” |
| Platform Length | 59” |
| Overall Width | 82” |
| Overall Length | 83.25” |
| Motor | 2HP, Single Phase, 60Hz |
| Max Load per Platform | 3,850 lbs. |
| Lowered Height | 4.5” |
| Lifting Capacity | 7,700 lbs. |
| Installation | Standard |
| Colors Available | Black |
| Air Supply Required | 90 - 120 psi |
Additional Parts and Accessories
| Productivity Accessories | |
| Part No. | Description |
| DX77R-LF | Recessed Double Scissor Lift Power Control Console Installation Kit |
| DX77-ERK | Extended Ramp Kit for DX77 (Surface Mounted Unit) provides additional ground clearance (set of 4) |
| 10354 | Surface Mounted Steel Hose Guard Kit includes two 64" pieces and one 20" piece |
| 10356 | Surface Mounted Steel Hose Guard Kit includes three 20" pieces |
| 10549 | 1.5" Spotter Block Auxiliary Adapter (set of 4) |
| 10554 | 3" Spotter Block Auxiliary Adapter (set of 4) |
Download
Other Models
| Model Number | DX77 | DX77R |
|---|---|---|
| Width Between Platforms | 21 - 27” | 21 - 27” |
| Voltage | 208/220v | 208/220v |
| Rise Time | 43 s | 43 s |
| Rise Height | 74.5” | 70” |
| Ramp Length | 11.75” | 11.75” |
| Platform Width | 24.5” | 24.5” |
| Platform Length | 59” | 59” |
| Overall Width | 82” | 69.5” |
| Overall Length | 83.25” | 83.25” |
| Motor | 2HP, Single Phase, 60Hz | 2HP, Single Phase, 60Hz |
| Max Load per Platform | 3,850 lbs. | 3,850 lbs. |
| Lowered Height | 4.5” | - |
| Lifting Capacity | 7,700 lbs. | 7,700 lbs. |
| Installation | Standard | Flush Mount |
| Colors Available | Black | Black |
| Air Supply Required | 90 - 120 psi | 90 - 120 psi |
Challenger Lifts Warranty Agreement
Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.
This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.
This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.
The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.
Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.
Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.
Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml
| Description | Model/Series | Labor | Functional Parts | Structural parts | Extended Warranty Available |
| CL10 | CL10 | 1 Year | 2 Years | 5 Years | Yes |
| 10K 2-Post, 9K 2-Post | LE10, SA10, CLFP9 | 1 Year | 1 Year | 5 Years | No |
| 12K, 15K, 18K 2-Post | CL12, 15000, 18000 | 1 Year | 2 Years | 5 Years | Yes |
| 8K Inground | EVW0820 | 1 Year | 2 Years | 2 years | No |
| 10K Ingrounds | EV1020 | 1 Year | 2 Years | 5 Years | Yes |
| 12K, 15K Ingrounds | EV1220, EV1520 | 1 Year | 1 Year | 5 Years | Yes |
| 14K 4-Post | 4P14 | 1 Year | 1 Year | 5 Years | No |
| 15K 4-Post | 4015 | 1 Year | 2 Years | 5 Years | No |
| 30K 4-Post Cable Drive | 4030 | 1 Year | 2 Years | 5 Years | No |
| 30K, 40K, 60K Chain Drive | 44030, 44040, 44060 | 1 Year | 1 Year | 1 Year | No |
| Rolling Jacks | RJ, SAJ | 1 Year | 1 Year | 1 Year | No |
| Mid and Short Rise | MR-6, SRM-10 | 1 Year | 1 Year | 1 Year | No |
| Scissors | SX14, DX77 | 1 Year | 1 Year | 1 Year | No |
| Mobiles | CLHM | 1 Year | 1 Year | 5 Years | No |
| Accessories | 90 days | No | |||
| Replacement Parts | 90 days | No |
Extended Warranty
An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.
