Dent Fix Equipment

Dent Fix Equipment DF-103 Trigger Switch Trigger switch for the DF-1 Stud Welder

Dent Fix Equipment DF-118 Long Pointer - 350mm Long pointer (350mm) for the DF-3 & DF-3S tram gauges

Dent Fix Equipment DF-1465 High Speed Cobalt Drill Bit - 6.5x45mm The DF-1465 bit is our 6.5mm or approximately 1/4-inch High Speed Steel Cobalt (HSCO) spot weld bit. The twist is smaller than the...

Dent Fix Equipment DF-1480 High Speed Cobalt Drill Bit - 8x45mm *Underlined products are sold separately The DF-1480 bit is our 8.0 mm or approximately 5/16th of an inch High Speed Steel Cobalt...

Dent Fix Equipment DF-15Dx Spot Annihilator Deluxe Kit The Original Spitznagel DF-15DX Spot Weld Drill that applies the cutting pressure pneumatically. You do not have to push on the drill bit. Our...

Dent Fix Equipment DF-1600K The Drill Bit Extender When access is limited or obstructed either by a structural member or other component, we have a solution. DF-1600K The Extender is a spot weld...

Dent Fix Equipment DF-1610 High Speed Cobalt Drill Bit - 10x45mm The DF-1610 bit is our 10.0mm and the largest diameter High Speed Steel Cobalt (HSCO) spot-weld bit we offer. The twist is larger than...

Dent Fix Equipment DF-1610T Titanium Nitride Drill Bit - 10x45mm The DF-1610T Titanium coating on this bit will help prevent the bit from dulling due to overheating. The twist is the same size as the...

Dent Fix Equipment DF-1610TC Titanium Carbon Nitride Drill Bit - 10x45mm The DF-1610TC Titanium Carbo Nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than...

Dent Fix Equipment DF-1667 6.7Mm Boron Killer Drill Bit - 6.7x80mm The DF-1667 Boron Killer, the ONLY way to drill through Boron Steel is with this bit. This drill bit was created to specifically cut...

Dent Fix Equipment DF-1680T Titanium Nitride Drill Bit - 8x45mm The DF-1680T is our most popular spot weld drill bit. 8.0mm or 5/16th is the most common size of spot welds that need to be removed...

Dent Fix Equipment DF-1680TC Titanium Carbon Nitride Drill Bit - 8x45mm The DF-1680TC Titanium Carbo Nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular...