Assenmacher Specialty Tools

Assenmacher F16393 Ford 1.5L/1.6L Flywheel lock Specifications: Comparable to Ford 303-393A with 303-393-02 block Used to hold the flywheel on Ford 1.5L/1.6L engines. Tool Applications for...

Assenmacher ATF24ST Audi Steptronic Filler Adapter Used for filling the new Audi Steptronic Transmission found in Audi A4, A6 and Q5 (2018-2024). Tool Applications for Individual Tools listed...

Assenmacher ATFMB725 Mercedes 725 Trans Filling Adapter Set Specifications: Comparable to #725 589 00 90 00 Used to fill Mercedes 725 transmissions. Must be used in conjunction with ATF129 and...

Assenmacher ALT34018 Splined Socket for Holding Altenator Pulley's Specifications: Comparable to Mercedes #602 589 00 10 00 Comparable to VW #3400 Comparable to Volvo #9995760 Comparable to KIA...

Assenmacher TM1615 16 x 1.5 Ball Joint Hammer Nut Specifications: M16 x 1.5 24mm Hex Prevents damaging threads or ripping a boot Used for breaking free BMW Ball joints using an impact hammer...

Assenmacher TM12125 12 x 1.25 Ball Joint Hammer Nut Specifications: M12 x 1.25 22mm Hex Prevents damaging threads or ripping a boot Used for breaking free steering knuckle/suspension joints...

Assenmacher INT100 International Coolant Drain Hose Specifications: Comparable to #09-146-01 and #KL5007NAV-282 Used to drain the coolant from the radiator and Low Temperature Radiator (LTR)...

Assenmacher PAC13 Paccar Engine Barring Socket Specifications: Comparable to Paccar #1903018 and #1453158PE Used for turning engine to TDC. Applicable to Paccar MX-13 engines. Tool Applications...

Assenmacher DDF19 Detroit Diesel Fuel Line Socket Specifications: 60mm Length 3/8" Drive Comparable to #J-48770 Used to remove and install injector feed tubes on Detroit Diesel DD13 and DD15 engines...

Assenmacher BMW10170 10mm 170mm long Socket Specifications: 1/4" Drive 6.69" (170mm) Overall Length Replaces H2797-1 Comparable to BMW #118620 Used for R and R of the ground connector screw for the...

Assenmacher TM2415 24 x 1.5 Ball Joint Hammer Nut Specifications: M24 x 1.5 Prevents Damaging the threads Used for hammering out axle shafts on Nissan and Tesla models. Tool Applications for...

Assenmacher T10518A Handle Release Tool Specifications: Supersedes the special tools T10517 and T10518. Used to remove the roof grab handle of the Tiguan without causing damage. The tool can also be...