Factory Shipped
Bendpak TSB-1 Tire Shop Bundle
Bundle Savings: (1) XPR-10AS + (1) R980XR + (1) DST30P + (1) FREE APX-TS1
Bendpak XPR-10AS 10,000 Lb. Asymmetric 2 Post Car Lift
BendPak XPR-10AS Dual-Width, 10,000 Lb. 2 Post Lift (Low profile arms available)
Every XPR-10AS two-post lift features Direct-Drive technology that’s only available with BendPak. The asymmetrical design of this lift has rotated columns, which makes it easier to enter and exit the vehicle and reduces the chance of door dings and dents. If you have a 12’ ceiling, you can have this lift in your shop or home today! A 10K capacity BendPak car lift is a smart addition to any shop or garage.
XPR-10AS lifts include:
- Direct-drive performance
- Tru-Metric arms for every lifting requirement
- Configurable top beam for wide or narrow installation
- User-friendly controls, high reliability, and long service life
- Triple-telescoping front arms and two-stage rear arms
XPR-10AS Characteristics:
- Lift Capacity: 10,000 lbs.
- Height: 145”
- Width: 137” (narrow config), 145” (wide config)
- Lift height: 69”
- Type: Asymmetric Clear Floor
Features:
- 10,000 lb. lifting capacity
- Expandable top beam accommodates wide or narrow drive-thru configuration
- Double-telescoping screw pads offer increased versatility
- Added overhead safety shutoff bar
- Exclusive Tru-Metric arm design for more versatile arm positioning
- 30° rotated single piece columns
- Single point safety release
- Drop end arms provide a lower pad height
- Dual hydraulic direct drive cylinders
- Oversized 53" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17" x 19" A36 steel base plate
- Self lubricating dura-glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3"
- Plated arm restraints and arm pins for rust prevention
- Heavy duty 1/2" aircraft quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4 piece 63 mm stackable adapter set comes standard
- Triple telescoping arm design
- Versatile drop in contact pads with stackable adapters
- ETL Approved
Ranger R980XR Tire Changer
Designed to Perform and Built to Last
The Ranger R980XR tire changer features variable high-speed modes that perform masterfully on a wide variety of wheels, including virtually all OEM configurations and performance tire-and-wheel configurations. Each R980XR tire changer features the latest in design and wheel service technology, providing the best value and performance in its class. The powerful motor and gearbox work systematically at a controlled speed for easy tire removal and installation. Ergonomic controls are sensibly placed to minimize excessive reaching, walking or bending, resulting in more jobs per day and increased profits. Large storage trays provide ample space for accessories.
Specifications
Motor | 3 HP (220 VAC 50-60 HZ) |
Drive System Type | Electric / Air |
Air Requirement | 140-165 PSI (10-11 BAR) |
Wheel Clamping Method | 4 Clamps - Internal / External |
Table Clamping System | Dual Pneumatic Cylinders |
Bead Breaking System | Pneumatic Blade / Dual |
Tower Design | Rigid / Fixed |
Power Assist Towers | N/A |
Bead Seating System | Turbo Blast / Bead Seating |
Internal Rim Clamping Capacity | 10” – 30” (254 mm - 762 mm) |
External Rim Clamping Capacity | 9” – 28” (229 mm - 711 mm) |
Turntable Tire Width Capacity (Mounting) | 4” – 18” (102 mm – 457 mm) |
Bead Breaker Tire Width Capacity (Demounting) | 1.5” – 13” (38 mm – 330 mm) |
Maximum Tire Diameter | 50” (1,270 mm) |
Shipping Weight | 800 lbs. (363 kg) |
Features
- Inflation Gauge With Integrated Air Dump Valve
- Inflation Pressure Regulator/Limiter
- Brush
- Alloy-Steel Mount/ Demount Head
Ranger DST30P Six-Second Balancing Time Wheel Balancer
Ranger DST30P Wheel Balancer One-Spin, Minimal Weight Placement
The DST30P wheel balancer accurately and efficiently calibrates wheel and tire configurations. Like the DST2420 wheel balancer, the DST30P handles wheels up to a 30” diameter. It also contains many of the same working components as the DST-2420 but with one exception: we took the 64-tooth magnetic transducer encoder from the DST-64T and built it into this smaller unit for minimal yet incredibly precise wheel weight placements. The larger encoder features precision-cut square teeth to convert rotary position to a digital electronic signal, quickly achieving maximum profile and top-dead-center positioning
Features:
- Dynamic, Static, and Performance Alloy settings
- A multi-user save function holds presets to increase productivity
- An ergonomic control board and easy-to-read LED display has vibrant visual cues and keypad to improve efficiency and proper balancing techniques for faster floor-to-floor times
- A simultaneous retrieval of static, dynamic and ALU1/ALU2 data, identifies weight placement configurations for a variety of wheel styles and designs with the simple push of a button
- Automatic rolling wheel parameter setting feature saves valuable time and minimizes errors
- Low RPM balancing speed and rapid six-second cycle time
- Automatic braking
- Gram/ounce selection and millimeter/inch selection
- Automatic round-off with top-dead-center weight position indicator
- Manual or automatic start when hood is lowered
- Self-calibration function
- High-volume top weight tray and side shelf storage gives you room to inventory a wide variety of wheel weights and tools
- Newly designed side shelf features an open-top design that accommodates Ranger Quick-Peel™ adhesive tape weight convenient bulk rolls
- Precision-machined, hardened-steel 36 mm shaft
- Quick-release hub nut for dramatically reduced set-up times
- Side-position brake hold wheels at precisely 12-o’clock for proper weight placement
- Side cone storage pegs keeps accessories readily available
- New “open-side” hood design allows for a broader coverage of tire shapes and sizes
Bendpak APX-TS1 Tire Shop Accessory Pack
Accessory Pack: (1) 5215761 Frame Cradle Pads 60mm + (1) 5150555 Truck Cone Kit + (1) 5150230 Tape Weights Combo
Bendpak charges sales tax in California.